···
Log in / Register

How to resolve the EPC warning light on the dashboard?

1 Answers
LeJaxon
07/29/25 6:01pm
The solutions for the EPC warning light on the dashboard are: 1. Check if there is a malfunction in the intake system; 2. Use high-quality fuel; 3. Inspect whether the electronic throttle body is dirty and clean it if necessary; 4. Remove carbon deposits from related components; 5. Reprogram the ECU with relevant data. The reasons for the EPC warning light appearing on the dashboard include: 1. Brake lights not functioning; 2. Throttle or wiring faults; 3. Damaged brake switch; 4. Faulty clutch switch; 5. Abnormal cylinder pressure causing poor operation; 6. Intake system leaks or blockages; 7. ECU malfunction; 8. Sporadic false alarms.
Was this review help?
7
1
Share
More Forum Discussions

At what temperature does a dry dual-clutch transmission trigger an alarm?

Under normal driving conditions, the transmission fluid temperature of a dual-clutch transmission vehicle is typically below 135 degrees Celsius. An alarm will be triggered if the temperature exceeds this threshold. Causes of excessively high transmission fluid temperature: When a vehicle is subjected to excessive use, such as overloaded towing, or when driving in four-wheel-drive mode set for snow or off-road conditions, excessive slippage in the torque converter can cause the transmission fluid temperature to reach 135 degrees. How to handle overheating: Transmission overheating occurs more frequently in dry dual-clutch transmissions. If the transmission temperature is too high, it is advisable to wait for it to cool down before continuing use. Excessive temperature can lead to transmission failure.
9
0
Share

Do small cars need to warm up?

Automobiles also require preheating. In summer, the preheating time should not be too long, and there is no need to press the accelerator. Introduction to automobile engines: The automobile engine is the device that provides power for the car, serving as the heart of the vehicle. It determines the car's power, fuel efficiency, stability, and environmental friendliness. Reasons for warming up the car: The main reason for warming up the car is that after prolonged parking, the engine oil flows back into the oil pan at the bottom of the engine. Therefore, warming up is necessary. The correct method for warming up the car is to start driving 30 seconds to one minute after ignition, but avoid driving at high RPMs during this time. Maintain a low speed, keeping the engine RPM below 3000-3500, generally around 2000 RPM.
6
1
Share

What does intelligent connected vehicle mean?

Intelligent connected vehicles refer to the organic integration of the Internet of Vehicles and intelligent vehicles. They are equipped with advanced onboard sensors, controllers, actuators, and other devices, combined with modern communication and network technologies, to achieve intelligent information exchange and sharing between vehicles and people, vehicles, roads, and backend systems. This enables safe, comfortable, energy-efficient, and efficient driving, ultimately leading to a new generation of vehicles that can replace human operation. Current development status of intelligent connected vehicles: In 2016, the Ministry of Industry and Information Technology organized the industry to accelerate the formulation of development strategies, technology roadmaps, and standard systems for intelligent connected vehicles. The Ministry of Transport has also accumulated extensive experience in intelligent traffic management through the implementation of the "two buses and one micro" vehicle management policy. Development prospects of intelligent connected vehicles: Miao Wei, the Minister of Industry and Information Technology, previously stated that non-traditional automotive industry enterprises are encouraged to cooperate with current automobile manufacturers to promote innovation and enhance competitiveness.
19
5
Share

Where is the vehicle ICCID located?

The vehicle ICCID can be found in the central control screen of the car or queried at a 4S store. ICCID is an integrated circuit card identifier used for telematics functions, essentially a built-in SIM card in the car's infotainment system. It serves as a protective measure to prevent software piracy. When the owner activates the infotainment system, a unique identifier is generated based on the computer hardware and software information installed by the user. The digital encoding format is XXXXXX0MFSSYYGXXXXXXX. In this sequence, the first six digits represent the operator's code, which is also the unique identification number. The ICCID number is printed on the mobile SIM card and its holder. The ICCID is the unique identifier for the IC card. When activating the infotainment system, the car generates an identification code based on the hardware and software information of the system, consisting of 20 digits. In addition to the vehicle ICCID, the central control screen also contains the SN code. SN stands for Serial-Number, sometimes referred to as SerialNo, which is the product serial number. The product serial number is a concept introduced to verify the legitimate identity of a product, ensuring users' rights to genuine software and legal services. Each genuine product corresponds to only one set of serial numbers, primarily to prevent software piracy. Users must know the serial number to use the software. The SN code can be found on the vehicle frame. It is also known as the machine code, authentication code, or registration application code.
13
3
Share

What is the Difference Between a 4S Store and an Auto Trading Store?

The differences between a 4S store and an auto trading store include variations in pricing, after-sales service, vehicle sourcing, store setup, and insurance. The specific details are as follows: Price difference: For the same car model, the base price at an auto trading store may sometimes be cheaper than at a 4S store. This is because auto trading stores are secondary dealers, sourcing their cars from 4S stores, effectively acting as sales agents for them. The vehicles they offer come at internal cooperative prices with 4S stores, hence the lower prices. Additionally, auto trading stores do not need to build dedicated showrooms for specific brands, nor do they require significant advertising investments or other expenses, significantly reducing their per-vehicle costs compared to 4S stores. After-sales service difference: Under the new automotive three-guarantee law, regardless of whether a consumer purchases a car from a 4S store or an auto trading store, the seller must bear responsibility for any quality issues with the vehicle. If a problem arises with a car purchased from a 4S store, the 4S store will handle it immediately. If the car was bought from an auto trading store, the store will liaise with a 4S store to resolve the issue. However, the after-sales maintenance service at a 4S store is generally superior to that at an auto trading store. Sourcing difference: 4S stores source their vehicles exclusively from the original equipment manufacturers (OEMs). Each city's 4S stores are agents, paying deposits and fees after preliminary negotiations to qualify for purchasing vehicles from the OEMs. Typically, a 4S store collaborates with only one OEM. In contrast, auto trading stores obtain their vehicles from 4S stores and have no direct connection with OEMs, which is why they are often referred to as secondary networks. Moreover, auto trading stores are not limited to partnering with just one 4S store; they usually collaborate with multiple 4S stores simultaneously. Store setup difference: 4S stores are more formal, usually located in automotive sales hubs with prominent geographical advantages. Their store layouts are more detailed, with clear divisions of labor among departments and strict service processes from entry to exit. Auto trading stores, on the other hand, are much simpler, with no stringent requirements on location or store setup, and they place less emphasis on service and decor. Insurance difference: Some auto trading stores require customers to purchase car insurance in-store, often at relatively high discounts. However, the insurance companies they partner with may be small, potentially leading to claim denials in case of accidents. In contrast, 4S stores offer lower insurance discounts, resulting in higher total insurance costs, but they generally partner with larger, more reliable insurance companies. Additionally, there are several considerations when purchasing a car from an auto trading store: Auto trading stores issue invoices from 4S stores: Since auto trading stores source their vehicles from 4S stores, they are treated as regular consumers by the 4S stores. When an auto trading store purchases a car from a 4S store, it must pay upfront and use the customer's ID to issue the purchase invoice. This is akin to having a friend buy a car on your behalf from a 4S store, which the 4S store acknowledges. Normal warranty coverage: Regardless of where you buy the car, as long as you have a valid purchase invoice, the car is entitled to the standard warranty from the date of invoice issuance. Most cars today come with lengthy warranty periods, ranging from 3-4 years to a decade or more, with some even offering lifetime warranties. Signing a purchase contract: Reputable auto trading stores will sign a purchase contract with customers, detailing the model, price, color, and configuration. Customers can request specific terms in the contract, such as whether the car has any damage or is from inventory, and include these in the agreement. This ensures that any issues can be addressed later with the contract as proof. Financing: If opting for a car loan, it's advisable to use the manufacturer's financial services offered by the auto trading store. Manufacturer financing serves as a primary purchase credential, with lower unnecessary fees and more favorable interest rates compared to banks. Loans from banks or private lenders partnered with the auto trading store may come with significantly higher fees. Choosing a reputable auto trading store: A reputable auto trading store should have a long-standing presence, good reputation, many repeat customers, and comprehensive information.
18
5
Share

What is the displacement of the Volvo S90?

Volvo S90 has a displacement of 2.0 liters. Displacement refers to the volume of fluid inhaled or exhausted per stroke or cycle. The Volvo S90 is a mid-to-large-sized 4-door 5-seater sedan with body dimensions of 5090 mm in length, 1879 mm in width, and 1450 mm in height, a wheelbase of 3061 mm, and a fuel tank capacity of 55 liters. The Volvo S90 is equipped with a 2.0T turbocharged engine, delivering a maximum power of 184 kW at 5400 to 5700 rpm and a maximum torque of 350 Nm at 1800 to 4800 rpm.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.