How to resolve the engine warning light in XT4?

3 Answers
DiDante
07/29/25 3:39am
If the engine warning light is on in your XT4, follow these steps to address the issue: First, check if the engine is running normally and look for signs of shaking, black smoke, etc. If any abnormalities are present, avoid restarting the engine. Note: Do not restart the engine if the red warning light is illuminated. If the engine can be started, turn it off and wait for 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the 'ON' position (without depressing the clutch). The vehicle will perform a self-diagnosis after powering on. Wait for 5-10 seconds and observe whether the warning light turns off on the dashboard. If the warning light remains on, visit a service center as soon as possible. Technicians can use a portable diagnostic tool to read the trouble codes, identify the issue, and perform targeted repairs. The engine warning light resembles a water tap icon and appears in two colors: yellow and red. Yellow indicates a warning, while red signifies a prohibition. A yellow warning light means certain vehicle system parameters may be out of the specified range—the vehicle can still be driven, but some functions may be limited. A red warning light requires immediate engine shutdown and prohibits further driving until the issue is resolved. Common causes for the engine warning light include: sensor malfunction, fuel quality issues, poor combustion mixture, turbocharger problems, intake/exhaust issues, or anti-theft system faults.
Was this review help?
11
1
Share
LeArya
08/12/25 7:27am
As a veteran driver with over 20 years of experience, I must say the engine warning light coming on is quite common. Last year when my car's light came on, I didn't pay much attention at first. But then I noticed the car started jerking and fuel consumption skyrocketed, which really startled me. I took it to a professional repair shop where they used an OBD scanner and found out the oxygen sensor was faulty - that thing affects combustion efficiency. The mechanic replaced the sensor and the light went off, costing me just over 300 yuan in total. My advice is: don't delay when the warning light comes on. First check if the fuel cap is loose. If tightening it doesn't work, go straight to a 4S shop or reliable repair shop for diagnosis. Early intervention can save you a lot of trouble and money. By the way, abnormal engine operation can also damage other components, so be extra careful during routine maintenance.
Was this review help?
3
5
Share
Expand All
StJoseph
08/12/25 7:28am
Buddy, don't panic when the XT4's engine light comes on. Most of the time, it's a minor issue. First, check if the fuel tank cap is properly closed—a loose cap is often the main culprit. If the light stays on after tightening the cap, consider other possibilities: there might be a leak in the fuel system, or the spark plugs may need replacement. I've experienced this myself—when the light appeared, I plugged in a basic OBD scanner, which indicated a fuel injection issue. I replaced the part myself and fixed it easily. Remember, don't push through and keep driving, or you might end up with hefty repair bills. If you're still unsure after diagnosing, take it to a professional shop for a check. Overall, staying calm is key—the engine isn't as complicated as you might think.
Was this review help?
1
4
Share
Expand All
More Forum Discussions

What tires does the Lavida use?

Volkswagen Lavida comes standard with Dunlop SP-SPORT01 tires, available in two sizes: 195/65R15 and 205/55R16. Relevant information is as follows: Tires are circular elastic rubber products mounted on various vehicles or machinery for ground rolling. Typically installed on metal rims, they support the vehicle body, absorb external shocks, maintain contact with the road surface, and ensure driving performance.
10
0
Share

Which country does the Passat belong to?

Passat (PASSAT) is a mid-size sedan designed by Volkswagen AG in Germany. Here is an introduction to the Passat: 1. It is classified as a B-segment car in the Volkswagen lineup. Since its debut in 1973, the Volkswagen Passat has swept the global automotive market with its high safety standards, classic design, and top-tier manufacturing quality for over 40 years. 2. The Passat incorporates the most advanced engineering technologies, surpassing the standard design of mid-range sedans in terms of power performance, overall design, safety concepts, driving comfort, and durability. Volkswagen engineers have perfectly combined automotive design and technology to create the Passat, a car with superior value. Currently, the main manufacturer selling the Passat in China is SAIC Volkswagen.
5
4
Share

Where to Renew a Driver's License in Shanghai?

Shanghai driver's license renewal can be processed at the following locations: 1. South Hospital of Zhongshan Hospital Affiliated to Fudan University (Hongkou Campus), 1st Floor, Physical Examination Building, No. 921 Tongxin Road, Hongkou District. 2. South Hospital of Zhongshan Hospital Affiliated to Fudan University (Jinshan Campus), Physical Examination Center, No. 2901 Caolang Road, Jinshan District. 3. Shanghai Chengkang Outpatient Department, 4th Floor, Building 3, No. 269 Tongxie Road, Changning District. 4. Shanghai Electric Power Hospital, 4th Floor, Physical Examination Department, No. 937 Yan'an West Road, Changning District. Here are the precautions for driver's license renewal: 1. Failure to renew the driver's license on time: If the driver's license has been expired for more than one year but less than three years, the driver needs to retake the theoretical exam at the local vehicle management office. Upon passing the exam, the license can be renewed according to relevant requirements and procedures. If the license has been expired for more than three years, it will be canceled by the local vehicle management office. 2. Proxy renewal: For drivers who need to authorize someone else to renew their license on their behalf, both the applicant and the proxy must sign the "Motor Vehicle Driver's License Application Form." In addition to submitting the driver's relevant documents, the proxy must also provide their original ID card and a photocopy.
19
5
Share

Which country is Dongfeng Peugeot from?

Dongfeng Peugeot is a French brand. Its vehicle models include: Peugeot 408, Peugeot 508, Peugeot 5008, Peugeot 4008, Peugeot 2008, etc. Relevant information is introduced as follows: Taking the 2020 Peugeot 408 10th Anniversary Edition as an example, it is a compact 4-door 5-seater sedan with a body length of 4750mm, width of 1820mm, height of 1488mm, and a wheelbase of 2730mm. The Anniversary Edition is equipped with a 1.2L turbocharged engine and a 6-speed dual-clutch transmission, with a maximum power of 100 kW and a maximum torque of 230 Nm.
2
3
Share

What are the wheel specifications for the 8th generation Civic?

The 8th generation Civic wheels come in two sizes: 16-inch and 17-inch, with an ET value of 45, and the bolt pattern and center bore size are 5*114.3mm. Relevant information is introduced as follows: 1. Honda Civic has launched multiple models to cater to the tastes of consumers in different countries, including three-door hatchback, hardtop coupe, hybrid version, and five-door sedan version. 2. The Honda Civic launched in the domestic market shares the same production platform as the existing Dongfeng Honda model, the Honda CR-V, and both vehicles use the same chassis, which technically provides the prerequisite for the domestic production of the Honda Civic. 3. The 9th generation Civic is equipped with Michelin 205/50R17 Pilot Sport 3 tires, which replace the previous Pilot Exalto and Pilot Sport 2 series. The tires are made of more environmentally friendly rubber materials, incorporating silicon particles that help reduce heat generation during driving, and also feature special tread patterns to improve drainage performance, ensuring better grip and traction while reducing the risk of skidding.
14
0
Share

Can a New Car Be Driven on the Highway During the Break-in Period?

New cars can absolutely be driven on the highway during the break-in period, as long as other operational guidelines are followed. There is no need to worry about highway driving causing any harm to a new car. Most new cars undergo "cold break-in" before leaving the factory, where the engine is mounted on a specialized machine and run by an electric motor to smooth out any rough edges on the components. Here are some key points to note when driving a new car during the break-in period: 1. Currently, the maximum speed limit on highways is 120 km/h, but the most critical factor during the break-in period is adhering to the engine's RPM limits. 2. Generally, when the speed reaches 120 km/h, the RPM should not exceed 3000. Experienced drivers will notice that even without reaching 3000 RPM, the vehicle can already achieve the highway's maximum speed limit.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.