How to resolve the electronic steering lock failure on Baojun 510?

[DelJourney]

If the electronic steering lock on a Baojun 510 fails to engage, it is necessary to visit a repair shop to read the fault codes. Diagnosing and resolving the issue requires the use of a decoder for proper troubleshooting. Here is relevant information about the electronic steering lock failure on Baojun 510: 1. Causes: The issue may stem from an electronic steering lock malfunction, potentially caused by low vehicle voltage, the steering column lock not being released, or a mismatch between the remote key and the system preventing the steering column lock from disengaging. Alternatively, the steering column itself may be faulty. A detailed diagnosis at a 4S shop is required to pinpoint the exact cause. 2. Precautions: An electronic steering lock failure in the Baojun 510 can lead to vehicle drift during driving, where the car automatically veers to one side even when the steering wheel remains stationary. This could result from inaccurate front and rear wheel alignment or inconsistent alignment parameters. Other possible causes include bent or deformed left/right steering tie rods, or excessive clearance at the hinge joints.

[LaMary]

I've driven the Baojun 510 for several years and also encountered the electronic steering wheel lock failure issue, which was quite a headache back then. But don't panic—I've summarized a few tricks from experience. First, check if the battery voltage is insufficient; a weak battery can cause system malfunctions—try jump-starting or replacing the battery to fix it. Next, inspect whether the key or remote control battery is depleted and try replacing it with a new one. Then, check for loose or corroded wiring—unplug and reconnect the connectors under the steering wheel to ensure stable connections. Dirty sensors might also misjudge; wipe them with a cloth. If none of these work, restart the vehicle: remove the key, wait a few minutes, and reinsert it. Remember to perform regular maintenance, as cleaning steering system components can reduce failures. If the electronic lock fails, don't force it—safety first. It's best to have a repair shop inspect the control module. A common issue with this car is module aging, and professionals can quickly diagnose the root cause.

[VioletDella]

My car is a Baojun 510, and when I encounter the steering lock not engaging, I usually troubleshoot it myself first. First, check the battery level of the key remote—if it's low, try replacing it with a new one. Second, see if the car battery is aging; if the voltage is normal, the system should start. Third, inspect the wiring connectors, especially the plugs near the steering wheel, and tighten them if loose. Fourth, attempt a simple reset: turn off the engine, remove the key, wait five minutes, and reinsert it. If it still doesn’t work, avoid risky DIY attempts to prevent further damage and drive straight to the 4S shop for repairs. The mechanic mentioned that such issues are often caused by electronic control components, and regular inspections can save trouble. Safety comes first—a malfunctioning steering lock increases driving risks, so timely action is always the right move.

[StHarmony]

The electronic steering lock issue on the Baojun 510, I encountered last time was due to a nearly dead battery. First, check the battery status—low voltage will prevent the system from working. Then, inspect the key remote's battery; try replacing it or getting closer to the car. If these are okay, the wiring might be loose or corroded—open the connectors and clean them. Try resetting: turn off the engine, remove the key, and wait a few minutes. Be cautious not to wet the system while driving, as rain can cause water ingress and short circuits. Preventive maintenance is key to avoid breakdowns on the road.