How to Resolve the Electronic Parking Brake Malfunction in Passat?

How to Use Bluetooth in the 2013 Buick Encore?

Turn on the car's Bluetooth in the vehicle's central control menu, then activate your phone's Bluetooth. When connecting a new device, you need to click "Search for Devices" at the bottom of your phone's Bluetooth interface to discover the car's Bluetooth, then click on the car's Bluetooth to prepare for connection. Click on the car's Bluetooth to pair, and you will need to enter the pairing password displayed on the car's system. Once the pairing code is entered correctly, the Bluetooth will be connected. Generally, after connection, the screen's upper right corner will display your phone's battery level, signal, and other information. Next time you get in the car, simply turn on your phone's Bluetooth to automatically connect without repeating the setup process.

13

2

Share

How to Complete Online Study for A2 License Demerit Points?

This system is applicable to drivers with A1, A2, A3, B1, or B2 license types who have demerit records within a scoring cycle. The educational content is divided into three sections: Regulations, Warnings, and Safety. The total study duration is approximately 3 hours, which can be completed cumulatively in multiple sessions. Drivers of commercial passenger/lorry vehicles, school buses, or hazardous material transport vehicles engaged in professional transportation cannot participate in this system for verification education and must attend designated locations instead. The validity period of this study is one year, but it becomes invalid after completing the verification procedures.

10

0

Share

How to use the key to remotely control the windows of the CT5?

First, you need to confirm whether your vehicle model supports the function of closing the windows with the car key. If this function is available, simply press and hold the lock button on the remote control for about five seconds, and the windows will automatically rise and close. Similarly, if you need to open the windows, press and hold the unlock button on the key for about five seconds, and the windows will automatically lower. If there is no response after performing the above operations, it means your vehicle model does not have this function. You will need to insert the key to power on and manually close the windows.

12

3

Share

What are the B2 reverse parking techniques?

The car body is tilted, and it is easy to cross the line during reversing, and it is also easy to press the corner of the garage when exiting. Keeping the car body straight is the key, and the key is to learn to correct by observing the rearview mirror. When starting to reverse, you can first turn the steering wheel half a turn to the right to keep the car body slightly inclined towards the garage direction while reversing. When the rear of the car is about 1 meter away from the garage boundary line (the extension line extending towards line 1), start turning the steering wheel to enter the garage (do not turn the steering wheel too early, which means the car should turn more smoothly). After the rear of the car enters the garage, the steering wheel should still be kept close to the fully turned state. When the extension line of the car's midline swings into the bottom edge of the garage about 50 centimeters, return the steering wheel.

10

0

Share

How to set up the reversing camera for the 2021 Bora?

Connect the power supply line of the dash cam. One end of the step-down cable plugs into the dash cam, and the other end has two wires, one red and one black. The red is the positive pole, and the black is the negative pole. Route it through the fuse. Next to the fuse where the black wire is connected, there is a screw connected to the car body. Note that it must be connected to the car body to serve as the ground. Remove the rear cover of the reversing light in the trunk. Use an iron wire to thread the cable. The cable splits into two paths. First, pass the power signal line out from the reversing light cover. Unplug the connector, insert a needle into the small hole beside the front connector, and remove the reversing power line. Connect the red wire to it, then plug it back in. One section of the camera cable has a connector. Remove it and use an iron wire to thread it up. For the small notch used for fixing, slightly lengthen it with a small file, then secure the camera with instant adhesive.

4

0

Share

How to Turn On the Heated Rearview Mirror in CT5 Luxury?

The heated rearview mirror function is activated simultaneously with the rear windshield defogging function. Press the rear windshield defogging button on the air conditioning panel to start it. The heater behind the mirror quickly warms the mirror surface, gradually removing rain or fog from the mirror, eliminating the need for the driver to frequently wipe the mirror manually. When the owner turns on the defogging function, the electric heating function of the rearview mirror is also activated. The electric heating element rapidly heats up to a fixed temperature within a few minutes, typically between 35-60 degrees Celsius, thereby heating the mirror and achieving defogging and defrosting effects.

15

3

Share

How to Resolve the Electronic Parking Brake Malfunction in Passat?

How to Use Bluetooth in the 2013 Buick Encore?

How to Complete Online Study for A2 License Demerit Points?

How to use the key to remotely control the windows of the CT5?

What are the B2 reverse parking techniques?

How to set up the reversing camera for the 2021 Bora?

How to Turn On the Heated Rearview Mirror in CT5 Luxury?

How to handle using someone else's driver's license on 12123?

How to Apply for Vehicle Inspection Exemption for a 4-Year-Old Car on 12123?

How to use ACC?

How to Use CarLife in the 2021 Corolla?