How to resolve the Camry C1201 fault code?

1 Answers
AsherMarie
07/29/25 9:13pm
Main inspection focuses should be on the engine and ABS system. Different vehicle models may have the C1201 fault code, but the meanings represented can vary. It is essential to visit a 4S dealership to have professionals conduct a thorough inspection, followed by specific analysis and repairs based on the actual cause.
Was this review help?
1
0
Share
More Forum Discussions

The Difference Between Low Beam and High Beam Headlights?

The differences between low beam and high beam headlights: 1. Light intensity varies: The low beam is out of focus, emitting scattered light that illuminates a wide area at close range; the high beam is focused, emitting parallel light with greater brightness that can illuminate distant and high objects. 2. Illumination distance differs: The low beam is designed for short-range lighting with a fixed focus that cannot be adjusted; the high beam is intended for long-range lighting, offering greater distance and brightness. 3. Usage scenarios vary: Low beams are used when driving on urban roads where lighting conditions are generally good, as high beams can easily dazzle oncoming traffic and cause accidents; high beams can be used on highways or in rural areas without streetlights to expand the field of vision.
12
4
Share

How many Porsche 918s are there worldwide?

Here is relevant information about the global quantity of Porsche 918s: 1. The Porsche 918 is globally limited to 918 units: Among the three top-tier supercars, it has the largest allocation, with over a dozen units in Shanghai alone. Each unit has its unique serial number. 2. Additional information: China is the second-largest market for the Porsche 918, with an allocation of over 100 units. The United States has the most, with 297 units. It is said that although there were orders for over 100 units, the actual number delivered and in use is not high, with only about 10 units officially registered and on the road nationwide.
18
2
Share

How to Remove the 80km/h Speed Limit on Honda Motorcycles?

Methods to remove the motorcycle speed limiter include: 1. Immediate full speed: With the ignition switch off, turn the throttle grip to the maximum with your right hand while holding the brake lever to the maximum, then turn on the ignition switch with your left hand, and release the throttle grip and brake lever with your right hand. 2. Memory full speed: Turn the throttle grip to the maximum with your right hand while holding the brake lever to the maximum, turn on the ignition switch with your left hand while holding the left brake lever, and quickly turn the throttle grip to the maximum and release it twice with your right hand. To remove the speed limiter, the rider needs to reprogram the ignition curve to unlock the speed limit. However, for safety reasons, the ignition system also has some leeway. To achieve higher speeds, it is also necessary to replace the ignition system.
8
3
Share

What to Do If You Have No Sense of Direction While Driving?

Install a navigation device in your car, frequently check maps online when you have time, or pay more attention to landmark buildings while driving. Here are some relevant tips for drivers: 1. Precautions: When driving to the entrance of a residential area, reduce your speed. During morning or evening rush hours, practice civilized yielding. When approaching a bus stop, be sure to watch out for pedestrians. In bad weather, reduce your driving speed to a safe level. At night, pay attention to the use of lights, etc. 2. Slow down: When preparing to enter a congested roundabout, observe and yield to vehicles already in the intersection. When meeting another vehicle, if your view is obstructed and it's difficult to see the oncoming vehicle, both drivers should slow down, keep to the right, and sound the horn to avoid danger.
13
5
Share

Is it normal not to see the hood while driving?

It is normal not to see the hood while driving. Here is a related introduction to the functions of the hood: 1. Airflow guidance: For objects moving at high speed in the air, the air resistance and turbulence generated by the airflow around the moving object will directly affect its trajectory and speed. The shape of the hood can effectively adjust the direction of the airflow relative to the car's movement and the resistance it generates, reducing the impact of the airflow on the car. Through guidance, air resistance can be decomposed into beneficial forces, increasing the force of the front tires on the ground, which helps stabilize the car's movement. The streamlined appearance of the hood is basically designed based on this principle. 2. Protection of the engine and surrounding pipeline accessories: Under the hood are important components of the car, including the engine, electrical circuits, oil circuits, braking system, and transmission system, etc., which are crucial to the vehicle. By improving the strength and structure of the hood, adverse effects such as impact, corrosion, rain, and electrical interference can be fully prevented, ensuring the normal operation of the vehicle. 3. Aesthetics: The exterior design of a vehicle is a direct reflection of its value. As an important part of the overall appearance, the hood plays a vital role in being visually pleasing and embodying the concept of the entire car.
1
3
Share

Where to Get a Motorcycle Annual Inspection?

Motorcycle annual inspection, also known as motor vehicle annual inspection, can be conducted at the vehicle management office in the registration location or at vehicle management offices outside the registration location. Materials required for annual inspection: "Motor Vehicle License Plate Application Form"; motor vehicle driving license; motor vehicle traffic accident liability compulsory insurance certificate; motor vehicle safety technical inspection certificate issued by a motor vehicle safety technical inspection institution; motor vehicle inspection record form; for motor vehicles subject to deferred inspection, if it is the first time in the current year to issue the motor vehicle safety technical inspection compliance mark, the "Motor Vehicle Deferred Scrapping Approval Form" must also be submitted. Notes for motorcycle annual inspection: Motorcycles should be inspected once every 2 years within 4 years from the date of registration; after 4 years, they should be inspected once every year. If the annual inspection is overdue, a fine will be imposed.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.