How to Resolve the Brake Light Malfunction Warning in Focus?

What is the fuel tank capacity of the Mercedes-Benz C-Class?

The 2022 Mercedes-Benz C-Class has a total of 10 models, all with a fuel tank capacity of 66 liters. The 2022 Mercedes-Benz C-Class is equipped with a 1.5-liter turbocharged engine, and the transmission type is an automatic transmission (AT), with a front suspension of multi-link independent suspension. Among vehicles in the same class, the 2022 BMW 3 Series 320i Sport Package has a fuel tank capacity of 59 liters, and the 2022 Audi A4L 35TFSI Fashion Dynamic model has a capacity of 56 liters. During the actual refueling process, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by car manufacturers is the volume from the bottom of the tank to the safe limit, and there is still some space from the safe limit to the tank opening. This space is reserved to ensure that the fuel in the tank can expand when the temperature rises without overflowing the tank's safe space. If fuel is added up to the tank opening during refueling, the actual refueling amount may be larger than the marked fuel tank capacity. If the owner wants to know the remaining fuel in the tank, they can observe the fuel gauge on the right side of the dashboard, which is marked with E and F. When the pointer is near E, it indicates that the fuel is almost empty, and when it is close to F, it means the fuel is sufficient.

17

1

Share

Why was the BAIC Weiwang S50 discontinued?

The discontinuation of the BAIC Weiwang S50 can be attributed to the following reasons: Model Aspect: The BAIC Weiwang S50 is essentially a rebadged version of the Senova X65, with similar exterior designs and nearly identical interiors. BAIC Weiwang also publicly claimed that the S50 was built on the same platform as the Senova X65. Given that the Senova X65 had already been discontinued, merely changing the logo and front grille for the S50 did not bode well for its future prospects. Performance Aspect: One of the main complaints from users was the S50's lackluster initial acceleration. The entire lineup was equipped with a 1.5T turbocharged engine sourced from Mitsubishi. During actual driving, the turbo only became noticeable at higher RPMs, resulting in poor performance during starts. Design Aspect: The BAIC Weiwang S50 leaned towards a more conservative and family-oriented style, which did not appeal to younger consumers. The dashboard featured a combination of piano black and faux wood grain finishes, which were visually acceptable but still felt plasticky to the touch. Additionally, the fit and finish needed improvement, as large gaps between components not only affected aesthetics but also increased the likelihood of rattles. Noise and Fuel Consumption: Users also expressed dissatisfaction with the S50's excessive wind noise and higher-than-average urban fuel consumption. Furthermore, the navigation system was frequently criticized for its laggy and delayed performance.

10

4

Share

What type of engine oil is suitable for the Civic 1.5T?

The original factory engine oil for the Honda Civic 1.5T is ENEOS oil, produced by Tianjin ENEOS Lubricants Co., Ltd., a joint venture between ENEOS and Great Wall. It is a fully synthetic oil with specifications of 0W-20/5W-30. The Civic 1.5T is equipped with a turbocharged engine, and using fully synthetic oil yields better performance. If you wish to change the oil during later maintenance, you can choose fully synthetic oils from brands such as the original factory oil, Shell Helix Ultra, Castrol EDGE, or Mobil 1 Gold. According to the official maintenance manual, it is recommended to use fully synthetic oil with specifications of 0W-20/5W-30 for maintenance. Any fully synthetic oil that meets the official recommended specifications can be used. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, resulting in smoother cold starts for the car. The latter number represents the kinematic viscosity of the oil at 100°C. The higher this number, the better the oil can maintain its viscosity index at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in a Honda Civic 1.5T is as follows: Wait for the engine temperature to cool down, allowing the oil to flow back into the oil pan; Use a wrench to loosen the oil drain plug and place an oil pan to catch the old oil until no more oil flows out. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain out; Use a specialized wrench to remove the oil filter; Apply engine oil to the oil seal of the new oil filter and tighten it clockwise by hand; Add the new engine oil through the oil filler cap on the engine valve cover. Generally, fill up to three-quarters of the oil container; Start the engine and let it run for 5 minutes, then check for any oil leaks around the oil drain plug and oil filter. If there are leaks, perform necessary repairs; After stopping the engine, pull out the oil dipstick and check that the engine oil level is within the standard range.

15

1

Share

Is the Mercedes-Benz C200 Front-Wheel Drive or Rear-Wheel Drive?

The Mercedes-Benz C200 is a front-engine, rear-wheel-drive (FR) model, which is a common drivetrain configuration. Advantages of Front-Engine, Rear-Wheel Drive: On well-paved roads during starting, accelerating, or climbing, the load on the drive wheels increases, providing superior traction performance compared to front-engine, front-wheel-drive (FF) configurations. The weight distribution between the axles is more balanced, resulting in better handling stability, ride comfort, and extended tire lifespan. The engine, clutch, and transmission are positioned close to the cabin, simplifying the layout of control mechanisms. Since the steering wheels are non-driven, the steering system is simpler and easier to maintain. Disadvantages of Front-Engine, Rear-Wheel Drive: The use of a driveshaft not only increases vehicle weight but also affects ride comfort. It also reduces the efficiency of the powertrain, impacting fuel economy and performance. On snowy or slippery surfaces during acceleration, the rear wheels pushing the body can lead to tail-happy behavior (oversteer). Common Drivetrain Configurations: Two-wheel drive is further divided into four types: front-engine rear-wheel drive (FR), front-engine front-wheel drive (FF), rear-engine rear-wheel drive (RR), and mid-engine rear-wheel drive (MR). Four-wheel drive includes full-time 4WD, part-time 4WD, on-demand 4WD, and hybrid part-time/on-demand 4WD. The most commonly used drivetrain configurations in passenger cars are FF, FR, and full-time 4WD.

6

4

Share

Can a roof rack be installed on a car?

It is possible to install a roof rack on a car. Below is a detailed explanation of two scenarios regarding the installation of roof racks on cars: 1. General situation: A roof rack can be installed after applying for and obtaining approval from the vehicle management department. For small and micro passenger vehicles, owners can install roof racks on their own without applying for permission. 2. Special situation: If the vehicle is originally equipped with a roof rack, additional items such as roof baskets and cargo boxes can be installed in compliance with regulations. If the vehicle does not come with a roof rack, an application must be submitted to the local vehicle management department.

18

0

Share

How to Reset the Maintenance Light on a 2017 Land Rover Range Rover?

Land Rover Range Rover maintenance light reset method: 1. Turn off the ignition switch and hold button A, then turn on the ignition switch. After 5 seconds, OIL-SERVICE or INSPECTION and RESET-SIA5 will be displayed; 2. Release button A, then press and hold button A again. After 5 seconds, the message RESET-SIA will start flashing; 3. Release button A, then press and release it again; 4. The display will show the new maintenance interval; 5. Press and release button A, and the message END-SIA will be displayed; 6. Turn the ignition switch OFF, and the reset is complete.

6

5

Share

How to Resolve the Brake Light Malfunction Warning in Focus?

What is the fuel tank capacity of the Mercedes-Benz C-Class?

Why was the BAIC Weiwang S50 discontinued?

What type of engine oil is suitable for the Civic 1.5T?

Is the Mercedes-Benz C200 Front-Wheel Drive or Rear-Wheel Drive?

Can a roof rack be installed on a car?

How to Reset the Maintenance Light on a 2017 Land Rover Range Rover?

Where are Lynk & Co engines produced?

Detailed dimensions of the Buick GL8?

What is the BAIC Senova?

What is the displacement of the Mercedes-Benz E300?