How to resolve abnormal tire pressure in Changhe Q35?

[OscarLee]

Changhe Q35 tire pressure reset method: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "ding" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, completing the tire pressure reset. The tire pressure monitoring indicator is a yellow symbol featuring an irregular circle with no seal on top, four small spikes at the bottom, and an exclamation mark inside. The illumination of the tire pressure monitoring indicator indicates abnormal tire pressure. Abnormal tire pressure generally stems from the following three reasons: Abnormal tire pressure: Typically, the system alerts when pressure is below 1.8 bar or exceeds 3.0 bar. In such cases, tire inspection and pressure adjustment are necessary. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure reset is not performed promptly, the tire pressure monitoring system retains the old data, causing the tire pressure monitoring indicator to light up. Simply performing a tire pressure reset will resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is installed directly inside the tire and connected to the tire inflation valve. If the sensor is damaged due to impact while driving, it can also trigger the tire pressure warning light. For sensor damage issues, the only solution is to replace it with a new component.

[LilaMarie]

Hey, I've encountered this issue before. When the tire pressure warning light comes on in the Changhe Q35, you need to follow the steps carefully. First, use a tire pressure gauge to check the actual pressure of all four tires. The recommended values can be found on the label inside the door frame or in the manual, usually around 2.1-2.3 bar or 33 PSI. Adjust the pressure to the standard level—inflate if it's too low and release some air if it's too high. Then, start the engine and navigate to the tire settings in the central control menu. Look for a reset button or option, press it, and wait for the system to confirm. Sometimes the light will turn off after resetting, but if it stays on, there might be a puncture or leak, so you should visit a tire repair shop. Make it a habit to check your tire pressure monthly—don’t overlook small details, as they can affect fuel efficiency and even be dangerous.

[AnthonyDella]

As a newbie, I was quite panicked when I saw this warning for the first time, but it's actually pretty simple. First, pull over to a safe spot, use a tire pressure gauge to check each tire's pressure against the standard range in your vehicle's manual. If the pressure is off, head to a gas station to adjust it with an air pump, ensuring balance. Then, start your car and look for the tire reset function on the dashboard, following the prompts to recalibrate the system. If the light stubbornly stays on, it might be a sensor issue, and a professional check at a 4S shop is recommended. Don't forget regular maintenance to avoid trouble—incorrect tire pressure can damage tires and accelerate wear. Most issues can be solved with simple DIY steps.

[RubyRose]

Handling tire warnings requires a systematic approach. First, measure the actual tire pressure to ensure it's within the standard range. If the deviation is too large, inflate or deflate to balance it. Then, reset the TPMS system: start the car, locate the reset button on the steering wheel or center console, hold it for a few seconds, and confirm. In most cases, this method will resolve the issue. If the light remains on, check the tires for leaks or punctures and repair them promptly to avoid the risk of a blowout. Frequent abnormalities may indicate a faulty sensor, requiring part replacement. Safety first—don't delay. Always check before driving on highways.