How to resolve a flat tire on Q50L?

How to Turn On/Off the Corolla ECO Mode?

Corolla's ECO mode is automatically activated and does not have a manual switch. The ECO mode only appears when the car is driven in the most fuel-efficient state. Below is some information about the ECO mode: 1. When driving in the city, where traffic congestion prevents high speeds, the ECO mode can effectively reduce fuel consumption. When this function is enabled, the vehicle's acceleration is correspondingly limited. Disabling the function results in more noticeable acceleration. Enabling ECO can reduce fuel consumption by 1-2 liters per 100 kilometers. 2. When the optimal fuel supply is achieved, the dashboard will simultaneously display the green "ECO" indicator. If the accelerator pedal is pressed hard for acceleration or when encountering uphill sections, the "ECO" indicator will disappear.

11

3

Share

What is the correct way to use manual paddle shifters?

Correct usage of manual paddle shifters: First, shift the gear to D, S, or manual mode. Once the engine reaches the appropriate RPM, switch to the suitable gear using the paddle shifter. Here are some related details about manual paddle shifters: 1. Manual paddle shifters are usually located behind the steering wheel, approximately at the three o'clock and nine o'clock positions, with one on each side. To enhance driving performance and make vehicle operation smoother and quicker, many modern cars are equipped with paddle shifters, further increasing driving enjoyment. 2. There are two types of paddle shifters: fixed and follow-up. Fixed paddle shifters remain stationary relative to the dashboard, meaning they do not move even when the steering wheel is turned. Follow-up paddle shifters, on the other hand, rotate with the steering wheel, maintaining their position relative to it during turns.

4

1

Share

Can the fire extinguisher be used when the pressure gauge pointer is in the yellow zone?

The fire extinguisher cannot be used when the pressure gauge pointer is in the yellow zone. More information about the fire extinguisher pressure gauge is as follows: 1. When the fire extinguisher pressure gauge pointer points to the green zone, it indicates that it can be used safely. 2. When the fire extinguisher pressure gauge pointer points to the red zone, it indicates that the pressure inside the bottle is insufficient and cannot be used normally, requiring replacement. 3. When the fire extinguisher pressure gauge pointer points to the yellow zone, it indicates excessive pressure, which can easily lead to danger and should be sent to a specialized institution for inspection and repair. 4. The fire extinguisher pressure gauge is an important indicator to determine whether the fire extinguisher can be used normally, so it should be observed frequently and inspected and repaired regularly.

13

2

Share

How to Operate Paddle Shifters in a Car?

Car paddle shifters are operated using two paddles marked with plus and minus signs to shift gears. This shifting method enhances the driver's comfort and reduces the likelihood of distraction. The specific steps for operation are as follows: 1. Press the car's brake pedal firmly all the way down until it stops moving. 2. Press the car's one-touch start button to start the engine and let it idle. 3. When the car's dashboard lights up, it indicates that the engine has started. 4. Move the car's automatic gear lever to the D position to enter automatic mode. 5. Pull the plus-sign paddle on the right side of the steering wheel once to upshift by one gear, and pull the minus-sign paddle on the left side once to downshift by one gear.

1

Share

Can You Continue Driving When the Idle Oil Light Flashes?

You can drive when the idle oil light flashes, but to prevent excessive wear of the oil pump, it should be replaced promptly. Here is some extended information about idling: 1. After the engine starts, the idle control valve opens for a period to increase the air intake, raising the engine idle speed to approximately 1500r/min-3000r/min. When the engine coolant temperature is low, the idle control valve opens to achieve an appropriate idle speed. 2. The amount of oil replaced in the car should be slightly lower than the mark on the oil dipstick. Excessive oil increases the rotational resistance of the crankshaft, reduces the engine's output power, and the excess oil may enter the combustion chamber, leading to oil burning, blue smoke emission, and increased fuel consumption.

8

2

Share

What are the six methods for throttle body matching?

There are six methods for throttle body matching, including manual matching, etc. Manual Matching: Some vehicles use cable-operated throttle bodies. After replacing the throttle body, you can manually match it by turning the ignition key on and off several times. The vehicle's computer will delete the old throttle body's memory and store the new throttle body's data. If the vehicle runs normally, the matching is complete. Battery Disconnect Matching: After replacing the throttle body, disconnect the negative terminal of the battery and wait for one minute before reconnecting it. This process will clear the vehicle computer's original memory and restore it to factory settings. If the vehicle starts and runs normally, the matching is successful. This method is suitable for low-end vehicles and should not be used for high-end vehicles. Diagnostic Tool Matching: After replacing the throttle body, you can use a specialized automotive diagnostic tool for matching. Enter the system, select action test, and click on "adaptive value reset." Repeat this process several times. If the vehicle starts and runs normally, the matching is successful. Old Throttle Position Sensor Matching: After installing a new throttle body, if you encounter issues like unstable idle speed or excessively high idle speed, you can unplug the new throttle position sensor and plug it into the old throttle position sensor. Start the vehicle and let it run normally, then turn off the engine and reconnect the wiring harness to the new throttle body. Electronic Throttle Manual Matching: Most modern engines use electronic throttle bodies, and the matching method differs from cable-operated ones. After replacing the throttle body, turn on the ignition and listen for the sound of the throttle motor operating. Wait for about a minute until the throttle motor operates again, then start the vehicle. If the vehicle runs normally, the matching is successful.

16

5

Share

How to resolve a flat tire on Q50L?

How to Turn On/Off the Corolla ECO Mode?

What is the correct way to use manual paddle shifters?

Can the fire extinguisher be used when the pressure gauge pointer is in the yellow zone?

How to Operate Paddle Shifters in a Car?

Can You Continue Driving When the Idle Oil Light Flashes?

What are the six methods for throttle body matching?

What engine does the Peugeot 301 have?

Should the turn signal be used throughout the entire ramp?

What are the benefits of delaying license plate registration?

What is the installation direction of the parking diesel heater fuel pump?