How to Reset Tire Pressure on the Envision?
2 Answers
Method to reset the tire pressure monitoring system on the Envision: First, turn on the ignition, then press and hold the tire pressure monitoring reset button until you hear a "ding" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, indicating the tire pressure reset is complete. Precautions for inflating tires: Always use a pressure gauge to check the tire pressure to avoid overinflation, which can cause the tire to burst. After stopping the vehicle, wait for the tires to cool down before inflating, as driving increases tire temperature, which affects pressure. Inspect the valve stem. If the valve stem and valve core do not fit smoothly, have protrusions, depressions, or other defects, it may hinder inflation and pressure measurement. Ensure cleanliness during inflation. The air being pumped in should not contain moisture or oil to prevent deterioration and damage to the inner tube rubber. Do not exceed the standard pressure excessively and then deflate, nor overinflate due to prolonged inability to inflate while away. Exceeding the standard pressure too much can overstretch the cords, reducing their strength and affecting the tire's lifespan.
I've always found resetting the Envision's tire pressure to be quite straightforward, as easy as setting an alarm on a smartphone. First, turn the key to the accessory position or start the engine to activate the menu-operable state. Then, use the multifunction buttons on the left side of the steering wheel to scroll through the dashboard display until you find the 'Settings' or 'Vehicle Information' option. Inside, locate the 'Tire Pressure Monitoring System' and select the reset or relearn function, then press the confirm button. At this point, the system will record the current tire pressure as the new baseline. After resetting, don't rush to turn off the engine—drive for about five minutes to allow the system to automatically update the data. The tire pressure warning light should then go off. If it doesn't, there might be an actual tire leak or a sensor malfunction, requiring a professional inspection. Regularly resetting can prevent false alarms and enhance driving safety, especially before long trips—don't forget to do it.
