How to Reset the Wrench Maintenance Light on a ZX Auto Pickup Truck?
4 Answers
The method to reset the wrench maintenance light on a ZX Auto pickup truck is: 1. Turn off the ignition switch; 2. Simultaneously press the accelerator pedal and the brake pedal; 3. Turn on the ignition switch; 4. After 20 seconds, the maintenance light will flash; 5. Turn off the ignition switch and release the accelerator and brake pedals; 6. Start the engine to complete the maintenance light reset. The purpose of the maintenance light is to record the mileage of important components, acting like a timer to remind the vehicle owner and maintenance personnel. Car maintenance items include: 1. Replace engine oil, oil filter, air filter, and fuel filter; 2. Inspect the body and tires; 3. Check the braking system; 4. Inspect the chassis for damage; 5. Check the fluid levels.
As a ZX Auto Pickup owner who has been driving this vehicle for several years, the maintenance light (the small wrench icon) can be reset quite easily. First, ensure the vehicle is turned off and the key is removed to put it in a completely closed state. Then, reinsert the key but do not start the engine—turn it to the position where the dashboard lights up (usually called ACC or ON position). Now, locate the trip meter button near the dashboard, press and hold it without releasing. After about 5-10 seconds, the wrench light will start flashing and then turn off—at this point, release the button to complete the reset. Note that the button position may vary depending on the model year of your ZX Auto Pickup, so it’s advisable to check the user manual or consult a professional shop. If not reset, the light will stay on to remind you that maintenance is due. While it doesn’t affect driving, prolonged neglect of maintenance can lead to engine damage due to dust or aged engine oil. I always reset it immediately after every maintenance service, and this habit has saved me a lot on repair costs.
My family owns a ZX Auto Grand Tiger pickup truck, and I can reset the maintenance light myself: After turning off the engine and parking, first remove the key and wait for 30 seconds. Reinsert the key and turn it to the second position without starting the engine. Then, press and hold the mileage button or the small wrench key on the dashboard for about 10 seconds until the light goes off. The process is simple and requires no tools, making it easy even for novice drivers. If you forget to reset it, the light will keep reminding you, which can be annoying but doesn't stop you from driving. However, delaying maintenance might lead to louder engine noise or increased fuel consumption. Since pickups often carry heavy loads, they have shorter maintenance intervals. I change the oil and inspect the chassis every year. Resetting the light early can prevent minor issues from becoming major problems.
I previously researched the maintenance system of ZX Auto pickups. The reset method mainly relies on button operations: After parking and turning off the engine, press and hold the TRIP button on the dashboard, then turn the key to the ON position without starting the engine. Wait for the wrench light to flash three times before releasing. If successful, it takes less than a minute to complete. If not reset, the light will stay on, but it's just a reminder and doesn't affect driving—you can still drive without issues. The key is to perform actual maintenance regularly, such as changing the oil or cleaning the filter, rather than relying on the light as a reminder.
