How to Reset the Wrench Light on Great Wall Pickup Fengjun 5?

[DiLillian]

To reset the wrench light on the Great Wall Pickup Fengjun 5, follow these steps: 1. Turn off the ignition switch, ensuring the vehicle is in the off state. 2. Simultaneously press the left and right arrow buttons on the steering wheel, then turn the ignition to the power-on state and hold for more than 3 seconds. The dashboard will display whether the maintenance has been reset. 3. Press and hold the SET button on the center console for more than 3 seconds to confirm. 4. Finally, press the MODE button on the dashboard to complete the maintenance reset. Additional information: 1. Maintenance items for the Fengjun 5 include engine oil and oil filter, air filter, cabin air filter, fuel filter, brake fluid, transmission fluid, power steering fluid, spark plugs, and timing belt. Diesel models do not have spark plugs, and the timing belt must be replaced every 80,000 kilometers. 2. According to the maintenance manual, the first service for the Fengjun 5 is at 4,000 kilometers, followed by maintenance every 6,000 kilometers or six months, whichever comes first. Engine oil, oil filter, and transmission fluid should be replaced every 12,000 kilometers, the fuel filter every 24,000 kilometers, and the cabin air filter every 20,000 kilometers.

[McDelaney]

I've been driving for many years and it's quite common to encounter the small wrench light issue, which is a maintenance reminder light. It frequently appears on the Fengjun 5, and the method to reset it is quite simple: After getting in the car, don't start the engine, just turn the key to the ON position. Then press and hold the trip button on the dashboard (usually the ODO button) for 5 to 10 seconds, and the indicator light will automatically turn off. Make sure you've completed the actual maintenance before performing this operation. If the light keeps coming on, check if the maintenance records haven't been updated or if there's a wiring issue. I recommend reading the manual more often, as buttons may vary between different models, but for the Fengjun 5, this method usually works. Doing it yourself saves money and hassle, but don't ignore the warning, as it could affect the car's lifespan or safety.

[MacCaleb]

I've handled quite a few similar repairs. The small wrench light indicates the maintenance period is due. To reset it, follow these steps: First, confirm the maintenance has been completed; second, enter the vehicle, turn the key to the ON position without starting the engine; third, locate the button on the instrument panel (usually the Trip button) and hold it down until the light goes off. Don't rush the process—it takes about 10 seconds to take effect. Remember, if you press the wrong button or the light doesn't go off, it might be due to battery contact issues or require a special tool for reset. This method works for most Great Wall Wingle 5 models. Being prepared in advance can save you an unnecessary trip to the dealership. Maintenance is crucial—regularly check the oil or filters to avoid major issues.

[Lulu]

I drove the Great Wall Wingle 5 with my friend, and clearing that little wrench light isn't difficult. Turn the key to the ON position without starting the engine, then press and hold the odometer button on the dashboard for about 10 seconds until the light disappears. After resetting, remember to check if actual maintenance is due. This simple procedure can restore it - don't delay handling it too long. Easy to handle yourself.

[JaxsonAnn]

As a practical car enthusiast, I believe eliminating the small wrench light requires careful steps. The reason is mostly a maintenance reminder. Method: After getting in the car, close all doors and windows, then turn the key to the ON position; next, hold down the ODO button on the dashboard and wait for the light to flash and go out. This should be done after maintenance. If it fails, check the connector or manually restart the system. Safety first, do not operate while driving.

[LaEthan]

In social circles, sharing car experiences is common. The method to eliminate the small wrench light on the Great Wall Wingle 5 is to operate the instrument panel. Place the key in the ON position without starting the engine; press and hold the reset button to resolve the issue. Many pickup trucks follow a similar procedure. If it doesn't work, try disconnecting the battery or consult someone knowledgeable. Prevention is better than cure—regular maintenance can prevent the light from staying on and keep the vehicle in good condition.