How to Reset the Wrench Light on a Great Wall Pickup Truck?

1 Answers
LaIsabella
07/29/25 4:34pm
When a small wrench appears on the car dashboard, there are two methods to reset it. The first is to perform car maintenance, and the second is to reset it manually. The steps are as follows: 1. Switch to instant fuel consumption; 2. Turn off the ignition switch (completely off, lock the car position); 3. Before inserting the key, press and hold the mode switch (the switch that toggles between instant fuel consumption and trip mileage) without releasing; 4. Turn on the ignition switch and wait for the self-check to complete (do not start the engine); 5. Release the mode switch, and within 30 seconds, simultaneously press the mode switch and the clock switch (press time) to reset to zero.
Was this review help?
17
3
Share
More Forum Discussions

What are the reasons for feeling insufficient power after driving a car for a long time?

There may be several reasons for feeling insufficient power after driving a car for a long time: 1. Clogged fuel tank vent hole: The fuel tank switch, fuel filter, or the fuel pipe between the fuel tank and the carburetor are partially blocked, unable to meet the required fuel supply, resulting in a lean mixture and weak engine performance. Due to long-term use of the air filter without timely cleaning, clogging and insufficient air volume will cause an excessively rich combustible mixture, leading to a decrease in engine power. 2. Incorrect ignition timing or premature ignition: This causes premature combustion and detonation of the combustible mixture. Due to faults in the ignition system, the spark plug may misfire or produce weak sparks. 3. Cylinder compression pressure: Severe wear of the piston, piston rings, or cylinder increases the clearance between them, reducing sealing performance, which leads to cylinder head leakage and lowers cylinder compression pressure. Poor sealing of the crankcase causes air leakage, reducing suction power.
13
1
Share

How Much Insurance Compensation for Water-Damaged Cars in Natural Disasters?

Insurance compensation for water-damaged cars in natural disasters: The payout depends on the vehicle's value, repair costs, and is calculated based on a certain proportion according to actual circumstances. Below is relevant information about insurance company compensation for water-damaged cars: 1. Coverage under Auto Damage Insurance: Compensation is only available if the commercial auto insurance includes Auto Damage Insurance. The coverage includes rescue costs, cleaning expenses, and damages to electrical components or interior parts. However, engine damage caused by flooding or driving through water is generally excluded. 2. Purchase of Water Wading Insurance: If the vehicle has Water Wading Insurance, all damages, including engine damage, are compensable. If the driver forcibly starts the engine after the vehicle is water-damaged, causing engine damage, the insurance company will not compensate for the engine, even if both Auto Damage Insurance and Water Wading Insurance are purchased, and will only cover repair costs excluding the engine.
2
1
Share

What are the reasons for the Landwind X7 not responding when powered on and attempting to start?

Landwind X7 not responding when powered on and attempting to start can be due to the following reasons: 1. Battery depletion: Lack of water in the battery, battery failure, or prolonged use of the air conditioning can all lead to car battery depletion. Especially in winter, when temperatures are lower, the car's power consumption is significantly higher than in other seasons, and the battery's capacity decreases due to the cold environment, making it difficult to start the vehicle. 2. Ignition system failure: The car's ignition system is responsible for providing high voltage to the spark plugs at the right time to ensure the car runs properly. If the car fails to start and the battery is not the issue, it is likely that the car's ignition system has malfunctioned. 3. Engine carbon buildup: Gasoline contains a lot of moisture, poor fuel quality, or poor sealing of the valve seat rings. 4. Starter aging: If the car starter has been used for a long time, it may become aged, leading to weak starting or failure to start the car.
20
1
Share

Is the photo on the driver's license the one taken at the time of registration?

The photo on the driver's license is the one taken at the time of registration. 1. Requirements for driver's license photos: The photo on the driver's license must be taken by a qualified photo studio designated by the vehicle management office. The photo of the driver's license applicant must be taken according to the requirements for the driver's license, and the photos taken according to the above requirements are handed over to the driving school where the applicant is studying. The photo on the driver's license is the one submitted by the applicant at the time of registration with the driving school. 2. Photo size requirements: The photo must be a recent (within 6 months) front-facing, bareheaded, color, single-person, half-length photo of the driver's license applicant, with a size of 3.2cm*2.2cm, head length of 1.9cm~2.2cm, head width of 1.4cm~1.6cm, and a white background.
5
3
Share

What is the mnemonic for driver's license penalty questions?

Penalty question mnemonic: Obstructing or damaging license plate number; Altering driver's license information or failing to report information promptly; Not displaying probationary driver sign; Driving vehicle type inconsistent with license; Using original license after replacement; Illegal parking without moving or refusing to leave the scene. Driving with expired license without renewal inspection; Passenger vehicle overloaded but not exceeding 20%; Freight vehicle overloaded but not exceeding 30%; Driving without license, or driving during license suspension/revocation; Driving assembled or scrapped vehicles on road; Handing vehicle to unlicensed person or someone with revoked/suspended license; Hit-and-run causing accident without constituting crime; Illegally installing alarms, signs, or lights; Vehicle exceeding 50% of speed limit; Illegally blocking/detaining vehicles despite warnings; Intentionally damaging/moving/modifying traffic control devices causing harmful consequences without constituting crime.
12
2
Share

The Simplest Method to Increase Power for the Mark X?

Methods to increase power for the Mark X include lowering the intake air temperature, among others. Below are specific methods for enhancing the power of the Mark X: 1. Lowering the intake air temperature: The principle behind lowering the intake air temperature is that cold air is denser. Under the same volume, more mass of air will be drawn into the engine cylinders to mix with fuel, allowing the fuel to burn more completely. Complete combustion can result in greater energy output. 2. Upgrading to a larger exhaust pipe: This is one of the most common methods to boost power. Replacing the exhaust pipe with one that has a larger diameter and faster flow rate improves the smoothness of exhaust gas expulsion and also enhances the exhaust sound. 3. Replacing the spark plugs: Most vehicles use a distributorless high-voltage ignition system, where the output voltage of the ignition coil exceeds 100KV. However, due to energy loss in the high-voltage wires and spark plugs, the actual voltage used for ignition is only 20-50KV. Therefore, to reduce energy loss in the ignition system, using high-energy, stable spark plugs can improve power.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.