How to reset the wrench light on a 2011 Great Wall C30?

Why Is There a Rattling Sound from the Right Rear Wheel of the Car?

Reasons for the rattling sound from the right rear wheel of the car: 1. If the right rear wheel of the car is severely worn, with bulges or out-of-round conditions on the tire, a rattling sound will occur while driving. In this case, the tire should be repaired or replaced promptly to avoid safety hazards. 2. If the brake pads on the right rear wheel are severely worn, they will produce abnormal noises due to friction. 3. Damage to the right rear shock absorber of the car, mainly including damage to the plane bearing, ball joint, or spring. 4. If there are foreign objects attached to the right rear wheel, abnormal noises will naturally occur while driving.

14

3

Share

How Many Months Beyond the Norm is Considered a Stock Vehicle?

Stock vehicles refer to those that remain unsold in inventory. As for what constitutes a stock vehicle and the duration of stock time, there are no explicit legal definitions or boundaries. Generally, it is considered a stock vehicle if it has been in inventory for 3 to 6 months after leaving the factory. Some may exceed 6 months or even a year, with extreme cases lasting several years. When picking up a vehicle, it is crucial to conduct a thorough inspection to avoid receiving a stock vehicle. Pay attention to the following points during the inspection: 1. Check the production dates of the tires and glass; significant discrepancies may indicate issues. 2. Ensure there are no scratches on the exterior and no stains on the interior. 3. Start the vehicle to check if the lights, electronic instruments, wipers, turn signal levers, dashboard, etc., are functioning properly. 4. Inspect the trunk to confirm the completeness of tools, such as the warning triangle, spare tire, etc.

18

0

Share

How to Turn on High Beam Headlights?

Method to turn on high beam headlights: 1. Locate the high beam switch on the lever on the left side of the steering wheel or the light knob on the left side of the steering wheel. 2. Turn on the low beam headlights, then push the lever downward (toward the engine direction). The dashboard will display an indicator, and the high beam headlights will be activated. Difference between high beam and low beam headlights: 1. High beam headlights focus their light parallel, emitting a concentrated and bright beam that can illuminate distant and high objects. 2. Low beam headlights emit light in a divergent pattern, illuminating a wider area at a closer range.

10

2

Share

Why is there no signal in the car's reversing camera?

Here are the reasons why there is no signal in the car's reversing camera: 1. The operation of the reversing camera may be interfered with when the car is just started. 2. The probe of the reversing camera is damaged or the photosensitive signal of the chip is blocked due to prolonged use. 3. Poor line contact may cause the reversing radar to be intermittent. 4. The navigation card slot may be damaged, causing the reversing camera function to fail. Here are the solutions for no signal in the car's reversing camera: 1. The operation of the reversing camera may be interfered with when the car is just started. You can try restarting to check the situation. It may also be electromagnetic interference from other electrical devices in the car. Try turning off the radio or music player before restarting. 2. If the probe of the reversing camera is damaged or the photosensitive signal of the chip is blocked due to prolonged use, you can remove the camera and connect it to someone else's navigation system to test if the camera is damaged. 3. Poor line contact may cause the reversing radar to be intermittent. Check the connection points between the reversing radar lines and the vehicle's wiring for loose connections. 4. If the reversing camera in the car is part of an integrated navigation and reversing camera system, the navigation card slot may be damaged, causing the reversing camera function to fail. When selecting a reversing camera, pay attention to whether it matches your vehicle model. Consider factors such as the camera model, power voltage, screen size, waterproofing, shock resistance, and anti-interference capabilities. Cars generally use a power voltage of 12V, while large vehicles such as trucks and buses usually use 24V. The reversing cameras for cars and large vehicles should not be mixed.

6

5

Share

What does AQS mean in cars?

AQS is the air quality sensor in cars, also known as the comprehensive air environment monitor. It mainly monitors values such as temperature, humidity, air pressure, light, PM2.5, PM10, TVOC in the air, as well as gas concentrations like oxygen (O2), carbon dioxide (CO2), carbon monoxide (CO), and formaldehyde (CH2O). Its functions include the following points: 1. Detecting air turbidity, humidity, and toxicity. 2. Controlling the air conditioning's internal and external circulation. 3. Being highly sensitive to car exhaust, capable of sensing and automatically switching to internal circulation within seconds. 4. Having a general response to road dust. 5. Being slow to react to colorless harmful gases.

1

Share

What is the correct operation for parking an automatic transmission car?

Automatic transmission parking steps: Press the brake pedal to slow down and come to a complete stop; After the vehicle is stationary, shift to N (Neutral) gear; Engage the parking brake; Release the foot brake and confirm the vehicle is securely stopped; Press the foot brake again and shift to P (Park) gear; Turn off the engine and exit the vehicle. Below is an introduction to automatic transmission-related information: 1. As the name suggests, an automatic transmission does not require the driver to manually shift gears. The vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. A typical automatic transmission car has six gear positions, from top to bottom: P, R, N, D, S, L. 2. When parking, the most correct parking sequence is to first stop the vehicle, then shift to neutral after stopping, engage the parking brake, and then shift to P gear. In fact, you can also shift directly to P gear, mainly when parking in a parking lot. If parking on the road, after stopping, turn off the engine, remove the key, and finally release the brake. The engine can be turned off after shifting to P gear or even without shifting to P gear.

16

0

Share

How to reset the wrench light on a 2011 Great Wall C30?

Why Is There a Rattling Sound from the Right Rear Wheel of the Car?

How Many Months Beyond the Norm is Considered a Stock Vehicle?

How to Turn on High Beam Headlights?

Why is there no signal in the car's reversing camera?

What does AQS mean in cars?

What is the correct operation for parking an automatic transmission car?

How to Remove the Rear Tail Light of Hanteng X7?

What should be paid attention to when reversing into the garage?

How to Set One-Touch Up/Down for Mistra?

Are Car Cigarette Lighters Universal?