How to reset the wrench indicator on Arrizo 5?
4 Answers
Here are the steps to reset the wrench indicator on Arrizo 5: 1. Insert the car key. 2. Press and hold the toggle button. 3. Turn the key to the ON position for self-check. 4. Wait for the self-check to complete and the wrench indicator to disappear, keeping the toggle button pressed throughout the process. Below is additional information: Arrizo 5 maintenance schedule and items: 1. Engine oil: Every 6 months or 5,000 km, whichever comes first (e.g., if only 3,000 km is driven in 6 months, oil still needs to be changed). Mineral oil vehicles must change oil at 5,000 km. Synthetic oil can extend the oil change interval to 8,000–10,000 km. 2. Coolant: Every 2 years or 40,000 km. Clean the engine cooling system before adding coolant. 3. Brake fluid: Every 2 years or 40,000 km. Replace according to the original factory specifications and avoid mixing different types. 4. Power steering fluid: Every 40,000 km. Pay attention to the original factory specifications when replacing.
I remember the first time I drove the Arrizo 5, the little wrench icon lit up on the dashboard, which made me quite nervous. The reset method is actually quite simple: First, make sure the car is completely turned off and powered down. Sit in the driver's seat without pressing the brake pedal, then press and hold the TRIP button at the bottom left of the dashboard for about 5 seconds without releasing. Next, turn the key to the ON position but don't start the engine. At this point, the wrench icon will flash a few times and then disappear. If there's no response, try closing the door, locking the car, waiting a few minutes, and then repeating the steps—it might be due to system cache. The maintenance reminder is there to prompt you to change the oil on time; ignoring it can easily damage the engine. Regularly checking filters and fluids will save you trouble. After performing the reset, note down the mileage or set a calendar reminder so you can prepare in advance for the next service.
As a car owner who frequently helps friends with car repairs, I've dealt with many small wrench issues. The key to eliminating this icon on the Arrizo 5 lies in resetting the maintenance light: After the vehicle is completely turned off, hold down the round button near the steering wheel without releasing, while turning the ignition to the ACC position, and hold for about 10 seconds before releasing. If the icon persists, the button may be unresponsive or there might be a software error, in which case it's recommended to visit a 4S dealership for a diagnostic computer reset. Don't skip maintenance—this reminder is based on mileage calculation, so it's best to ensure all fluids have been changed before resetting. Developing a habit of keeping a manual record is more reliable than relying on in-car alerts and helps extend the lifespan of parts.
New car owners, don't panic when you see the little wrench icon—it's just a maintenance countdown. Here's how to reset it in the Arrizo 5: Turn off and disconnect the power, wait a few minutes, then press and hold the TRIP button for over 5 seconds. Turn on the power until the dashboard lights up (don't start the engine). The icon will disappear, then you can start normally. I succeeded on my first try. If it doesn't work, it might be due to incorrect operation or incomplete maintenance—don't force it, consult a professional. Remember, these alerts are protective reminders—regular maintenance prevents major repairs.
