How to Reset the Wrench Icon on Tiggo 5?

[Hylla]

Specific reset steps are as follows: 1. Locate the toggle button below the engine tachometer on the dashboard. 2. Insert the key of the Chery Tiggo 5 into the ignition. 3. Press and hold the toggle button on the left side of the Tiggo 5's steering wheel, set the switch to ON, wait for 3 seconds, then release the button to reset the wrench icon. 4. Turn the key to the second position to power on the vehicle and initiate self-inspection. Wait for the self-inspection to complete. 5. Restart the vehicle to clear the wrench icon. 6. Additional information: The wrench icon is a maintenance reminder light. Vehicle maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the vehicle, also known as automobile servicing.

[OKate]

I've also encountered that little wrench symbol on the Tiggo 5. It's just a maintenance reminder light, indicating it's time for an oil check or change. To reset it: First, completely turn off the engine. Then, press and hold the trip reset button on the dashboard. Next, turn the key to the ON position without starting the engine, and wait about 5 seconds while watching the dashboard - the wrench symbol will flash and disappear. At this point, you can release the button. If it doesn't work the first time, try a couple more times as the button might be slow to respond. After resetting, it's best to go directly to the shop or schedule maintenance - don't just clear the light without follow-up, as this could lead to problems like accelerated engine wear. Remember to regularly check your dashboard while driving and develop a routine maintenance habit to extend your vehicle's lifespan, saving money while ensuring safety.

[LeDaniela]

To reset the little wrench icon on the Tiggo 5, you'll need some know-how: After turning off and stabilizing the car, hold down the mode button on the steering wheel while turning the key to the ACC position without starting the engine. Wait for the maintenance option to appear on the instrument menu, select reset to confirm, and the wrench icon will be cleared. This method works for most model years, but be careful not to press other buttons by mistake, as it could confuse the system. After resetting, it's a good idea to check the engine oil level and air filter to ensure timely maintenance next time. If you're not familiar with the steps, refer to the owner's manual or search for video tutorials online. I often do this in the garage—keeping the car well-maintained means no worries about stalling on long trips.

[SanKathryn]

Don't rush to reset when you see the wrench icon—it's warning you that maintenance is due. Ignoring it may damage your vehicle. To reset: Turn off the engine, then hold the dashboard button while turning on the power. However, I recommend completing necessary checks first, such as changing the oil or filters. After resetting, visit a professional shop immediately for a thorough inspection to ensure safe driving. Regular maintenance prevents major issues, saves on repair costs, and gives you peace of mind on the road.

[McMartin]

The small wrench symbol is the maintenance counter of the vehicle's ECU system, which lights up once the mileage is reached. To reset it, you need to follow these steps: turn off the engine, press the reset button, turn the key to the ON position, and wait for the wrench light to go off before releasing. Occasionally, if the reset is done too quickly, the light may come back on, indicating that there are parts that genuinely need replacement. After resetting, check the voltage stability to prevent circuit failures. Maintaining these details ensures the car is more durable and experiences fewer faults.