How to reset the trip mileage of Haval H6?

1 Answers
BryceRose
07/30/25 4:11am
Short press the zero/adjust button at the lower right corner to switch between the two mileage display modes. In the trip mileage display mode, press and hold the zero/adjust button for more than two seconds to reset the trip mileage or small mileage display value to zero. There is a toggle button on the instrument panel for total mileage and trip mileage. When the trip mileage is displayed, pressing and holding the toggle button for 3 seconds will reset it. The total mileage cannot be reset, but AutoPartsCity can adjust the total mileage through the instrument panel.
Was this review help?
12
4
Share
More Forum Discussions

Is the National Day Holiday Expressway Toll-Free?

During the National Day holiday, the expressway is toll-free. In 2020, the toll-free period for the National Day holiday expressway starts from 00:00 on October 1st and ends at 24:00 on October 8th, totaling 8 days. For ordinary highways, the toll-free period is determined by the time when the vehicle passes through the toll lane of the toll station, while for expressways, it is determined by the time when the vehicle exits the toll lane. The toll-free vehicles on expressways include passenger vehicles with 7 seats or fewer (including 7 seats) that travel on toll roads, as well as motorcycles allowed on ordinary toll roads. The scope of toll-free expressways for local airport expressways must comply with the provisions of the Highway Law of the People's Republic of China and the Regulations on the Administration of Toll Roads, including toll roads (including toll bridges and tunnels) approved and established according to law. Whether local airport expressways implement toll-free policies is decided by the provincial (autonomous region or municipality) governments.
6
0
Share

Is there a 2-second delay for running red lights under the new traffic regulations?

There is no 2-second delay for running red lights under the new traffic regulations. The traffic signal system and electronic monitoring system operate in real-time synchronization. The electronic camera activates immediately when the red light turns on. Drivers must wait for the green light to turn on and confirm safety before proceeding. The red light running photo capture works by sensing the pressure from vehicles on the road through induction lines when the red light is on, then using sensors to send the signal to the central processor for temporary storage in the register. Electronic eyes are generally divided into two types: loop detection and video detection. Regardless of the type, all equipment must pass inspection by relevant national testing centers before being put into use.
10
3
Share

What are the reasons for the electronic parking system failure of the Geely Vision S1?

Geely Vision S1 electronic parking system failure may be caused by issues such as engine failure to start, punctured or burst tires, etc. Specific details are as follows: Engine failure to start: If the battery is dead, you can use jumper cables or an emergency power source to start the engine. If it still fails to start, it may indicate a problem with the vehicle's electrical or fuel system, and it is recommended to send the car for professional repair. Punctured or burst tires: Replace with a spare tire promptly and repair the punctured tire as soon as possible. Brake failure: Ensure proper maintenance of the braking system, regularly check the wear level of components such as brake discs and brake pads, and replace them if necessary. During daily driving, try to avoid prolonged braking. When encountering long downhill sections, it is advisable to use lower gears and engine braking to prevent overheating of the brake pads.
6
3
Share

What should I do if I drove 5 kilometers without releasing the handbrake?

Forgetting to release the handbrake and driving for 5 kilometers will not cause serious damage to the car, but it will accelerate the wear of the brake pads and will not harm the engine. The degree of brake pad wear can be determined by testing the braking effect or by observing the position of the brake handle to see if it needs to be pulled tighter to be effective. The effects of driving without releasing the handbrake: 1. The brake discs will wear faster, and the brake pads will harden after heating up, causing the handbrake cable to stretch, which will reduce braking performance. In severe cases, smoke may even appear from the rear of the car; 2. If you drive for a long time with the handbrake engaged, it may also cause the brake caliper to seize, brake fluid leakage, or the brake fluid temperature to become too high, leading to a complete loss of braking function, which is very dangerous.
11
0
Share

Is the highway free on New Year's Day 2021?

2021 New Year's Day highway is not free. The free passage time range includes four national statutory holidays: Spring Festival, Qingming Festival, Labor Day, and National Day, as well as the consecutive holidays determined by the State Council office documents for the above statutory holidays in that year. The free period starts at 0:00 on the first day of the holiday and ends at 24:00 on the last day of the holiday. For ordinary highways, the time is based on when the vehicle passes through the toll lane of the toll station, while for highways, it is based on when the vehicle leaves the exit toll lane. The free vehicles are passenger vehicles with 7 seats or less (including 7 seats) traveling on toll roads, including motorcycles allowed to travel on ordinary toll roads.
6
4
Share

What is the free time for highways on October 1st?

The free time for highways on October 1st is from 00:00 on October 1st to 24:00 on October 8th, totaling 8 days. For ordinary roads, the free time is determined by the time when the vehicle passes through the toll booth lane, while for highways, it is determined by the time when the vehicle exits the toll lane. The vehicles eligible for free passage on highways are passenger vehicles with 7 seats or fewer (including 7 seats) traveling on toll roads, including motorcycles allowed on ordinary toll roads. Please note that during the free period, ETC vehicles should try to enter and exit through ETC lanes. If entering through a manual lane and exiting through an ETC lane, the exit barrier will not lift due to the lack of entry information, and the vehicle will not be able to exit normally. In such cases, the vehicle must choose to pass through a manual lane.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.