How to Reset the TPMS Light on Dongfeng Aeolus Yixuan?
2 Answers
To reset the TPMS light on Dongfeng Aeolus Yixuan, follow these steps: First, turn on the ignition switch and press and hold the TPMS reset button. After hearing a "beep" sound, release the button. The TPMS will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, completing the tire pressure reset. There are generally three reasons for abnormal tire pressure: Abnormal tire pressure: The system will trigger an alarm if the pressure is below 1.8 bar or above 3.0 bar. In this case, inspect the tires and adjust the pressure accordingly. TPMS not reset: After inflating the tires, if the TPMS is not reset in time, the system will still record the previous data, causing the TPMS indicator light to illuminate. Simply perform a TPMS reset to resolve this issue. Damaged TPMS sensor: The TPMS sensor, installed inside the tire and connected to the tire valve, monitors tire pressure. If the sensor is damaged due to impact while driving, the TPMS warning light will turn on. For sensor damage, the only solution is to replace it with a new one.
When the tire pressure warning light comes on while driving my Dongfeng Aeolus Yixuan, I first pull over to check the tires. Use a pressure gauge to verify if all four tires are within the normal range, typically around 2.3-2.5 bar. If the pressure is low, add air; if it's high, release some air. If everything seems fine, start the car and press the menu button on the right side of the steering wheel. Navigate to the vehicle settings option, where you'll find an entry for the Tire Pressure Monitoring System (TPMS). Select the reset or calibration function. The light usually turns off after a successful reset. If you're unfamiliar with the process, consult the manual or look up online video tutorials. I make it a habit to check tire pressure monthly, especially when the weather gets colder, as temperature changes can sometimes trigger false warnings. A simple reset usually solves the issue, helping save fuel and prevent tire wear.
