How to reset the TPMS light on a JAC vehicle?

1 Answers
MaddoxMarie
07/29/25 4:08pm
The method to reset the TPMS light on a JAC vehicle is: Locate the tire pressure reset button labeled SET below the left side of the steering wheel, press and hold it for several seconds until the tire pressure warning light turns off, indicating a successful reset. The TPMS light may illuminate due to a malfunction in the tire pressure monitoring system, so it's advisable to check if the tires are underinflated. JAC is a comprehensive automotive enterprise group that integrates the R&D, production, and sales of a full range of commercial vehicles, passenger vehicles, and powertrains, covering numerous sectors such as automotive mobility and financial services. Its vehicle models include the Refine S3, Refine M6, Refine M5, Heyue 2014, Heyue A30, among others. Taking the Refine S3 as an example, it is a new urban compact SUV produced by JAC, with dimensions of 4345mm in length, 1765mm in width, and 1640mm in height, a wheelbase of 2560mm, powered by a 4GB1.5L engine, and paired with either a 6MT or CVT transmission.
Was this review help?
9
1
Share
More Forum Discussions

What does it mean when a car turns on the hazard lights?

When a car turns on the hazard lights, both turn signals flash simultaneously. There is a red triangle button on the vehicle's dashboard; pressing it will activate the hazard lights. This alerts other vehicles in case of emergencies and should also be used when parking on the roadside to prevent rear-end collisions. Hazard lights should be used in the following situations: 1. Driving in foggy conditions—since visibility is poor, both hazard lights and fog lights should be turned on to alert passing vehicles; 2. When the vehicle breaks down or is involved in a traffic accident, hazard lights should be activated to warn other vehicles for safety; 3. When towing a faulty vehicle, both the towing vehicle and the towed vehicle should turn on the hazard lights to indicate their abnormal status.
1
0
Share

Can Snow Tires Be Used as All-Season Tires?

Snow tires are specifically designed for winter conditions, such as icy and snowy climates and low-temperature regions, serving as an alternative to snow chains. Therefore, snow tires cannot be used as all-season tires. Compared to all-season tires, snow tires have different tread patterns. Using them as all-season tires would cause severe wear and significantly reduce their lifespan. Snow tires typically use a different rubber compound mixture than all-season tires. They contain a higher proportion of natural rubber and silica, which prevents the tires from hardening as much in low temperatures compared to synthetic rubber tires. This allows for better contact with icy surfaces, improving friction and grip, thereby enhancing vehicle control and safety on slippery ice. Snow tires feature significantly more small grooves—at least 1,000 compared to around 200 in all-season tires. The tread of snow tires has more fine patterns, which improve grip on snowy roads and facilitate better water drainage in wet or rainy conditions, reducing the risk of hydroplaning.
20
0
Share

Which side is the steering wheel on in UK cars?

In UK cars, the steering wheel is on the right side because the traditional custom in the UK is to drive on the left. Traffic regulations stipulate that both vehicles and pedestrians must keep to the left, which is the opposite of right-hand traffic in our country. Under this driving rule, the driver's seat is designed on the right side for convenience and safety when getting in and out of the car, meaning the steering wheel is on the right. More information is as follows: Reason: Due to differences in traffic systems across countries, about 66% of countries in the world implement right-hand traffic, while 34% implement left-hand traffic. China's traffic system follows right-hand traffic, and to ensure sufficient visibility for observing road conditions, the driver's cabin is naturally designed on the left. Example: Early car cabins were in the middle. Mercedes-Benz, one of the world's earliest car companies, initially had the steering wheel in the center of the car. Later, based on ergonomic reasons—people being more accustomed to using their right hand—the driver's cabin was set on the right side, a design that continues to this day.
16
1
Share

What is the reason for the rattling sound in the Haval H6 engine compartment?

The reason for the rattling sound in the Haval H6 engine compartment is: The vehicle has been parked for too long, causing most of the engine oil to flow back into the oil pan. During the cold start process, a protective oil film is not formed in time, resulting in metal impact sounds in the engine. The noise will disappear after the vehicle warms up. Taking the 2021 third-generation 2.0T automatic two-wheel-drive Max version of the Haval H6 as an example: It is a compact SUV launched by Great Wall Motors, with a length, width, and height of 4653mm, 1886mm, and 1730mm respectively, and a wheelbase of 2738mm. It is equipped with a 2.0T turbocharged engine, with a maximum power of 155kw and a maximum torque of 325nm, matched with a 7-speed dual-clutch transmission.
18
5
Share

Where is the front corner of the car located?

The front corner of the car is located at the positions where the left and right headlights meet the fenders and the sides of the front bumper, divided into the left front corner and the right front corner. The left front corner is the top corner of the left side of the car's front, and the right front corner is the top corner of the right side of the car's front. When driving a motor vehicle, it is essential to pay attention to both the left and right front corners of the vehicle to enhance driving safety. When the vehicle is 20 centimeters away from an obstacle, the lowest visible point of the obstacle is at 80 centimeters. For a sedan, 80 centimeters in height is approximately below the door handle, while for an SUV, it is around the lower edge of the headlight. Therefore, when approaching an obstacle, ensure that you can see below the door handle or the lower edge of the headlight to avoid collisions.
12
1
Share

What is the fault when the OBD light is on in Tianlong?

The illumination of the OBD light in Tianlong indicates an issue with the vehicle's electronic control system or exhaust emissions. The specific situation needs to be checked by professionals at a repair shop or 4S store. Composition of OBD: OBD is the On-Board Diagnostics system. It consists of a scanner, oscilloscope, and interface. Fault Localization: By automatically diagnosing vehicle conditions and sending fault codes to maintenance personnel, OBD enables quick fault localization, providing significant assistance in vehicle maintenance and repair. Interface Occupancy: If the OBD interface is occupied, it is generally only used as a power source and does not affect the vehicle itself. This is because external devices only read data from the vehicle's computer via the OBD interface without writing programs. OBD systems have self-protection functions, and writing programs requires entering the correct password. For safety reasons, avoid arbitrarily occupying the vehicle's OBD interface.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.