How to reset the tire pressure warning on the X-Trail?

What is the general width of a car in millimeters?

Car widths typically range between 1600mm and 2000mm. Generally, the front wheel arches mark the widest point of a car, with the recognized maximum width being 2 meters. Width primarily affects seating space and maneuverability. For passenger vehicles, if three seats are to be arranged side by side with sufficient width, the car's width usually needs to reach 1.8m. The Japanese government imposes stricter limits on car width, with most vehicles being under 1.8m, while European cars tend to have wider bodies. Additional information: The structure of a car body mainly includes the body shell (body-in-white), doors, windows, front sheet metal components, interior and exterior trim, body accessories, seats, as well as ventilation, heating, cooling, and air conditioning systems. For trucks and specialized vehicles, it also includes the cargo compartment and other equipment.

16

0

Share

Where is the OBD interface located in the Santana?

The OBD interface of the Santana is located under the steering wheel, directly above the left foot, slightly towards the steering wheel shaft, and the pink connector is the OBD interface. OBD stands for On-Board Diagnostics, which translates to "on-board self-diagnostic system" in Chinese. This system continuously monitors the engine's operating conditions to check if the vehicle's emissions exceed the standard. If they do, it will immediately issue a warning. When a system malfunction occurs, the Malfunction Indicator Lamp (MIL) or Check Engine warning light will illuminate, and the Powertrain Control Module (PCM) will store the fault information in memory. The fault code can be read from the PCM through a specific procedure. Based on the fault code, maintenance personnel can quickly and accurately determine the nature and location of the fault. OBD monitors the engine, catalytic converter, particulate filter, oxygen sensor, emission control system, fuel system, EGR, and other systems and components in real-time. Then, through various emission-related component information, it connects to the ECU [Electronic Control Unit, which can detect and analyze emission-related faults]. When an emission fault occurs, the ECU records the fault information and related codes, and issues a warning through the fault light to inform the driver. The ECU ensures access to and processing of fault information through a standard data interface.

12

0

Share

How to Cancel the Alarm with a Spare Key?

Car spare keys deactivate the alarm because the vehicle was originally locked using a remote key, and when opened with a mechanical key—whether it's the primary or spare key—the car's computer system defaults to interpreting this as a forced entry, triggering the alarm. To stop the alarm, quickly power on the vehicle after opening the door, as the spare key contains an engine decoding chip that allows the car to be started at any time. Here is some relevant information: 1. The car's spare key is intended for emergency use. Under normal circumstances, it is advisable not to leave it inside the car, as this can easily attract thieves, posing significant risks to personal safety and vehicle security. It is also not recommended to carry the spare key with you out of fear of being unable to unlock the car, as this could lead to accidental loss. However, if you are traveling long distances, you should carry the spare key with you to avoid major inconveniences in case the primary key is lost or becomes unusable. 2. A car alarm is a security device installed in the vehicle. If someone hits, impacts, or moves the car, the sensor sends a signal to the controller, indicating the intensity of the vibration. The system can then trigger a warning sound or a full alarm based on the vibration intensity, deterring thieves and alerting the owner. It is a multifunctional product that, in addition to its anti-theft alarm function, can also remotely open the trunk, lock/unlock doors, control windows, and even start the engine.

18

1

Share

How to Clean Car Fuel Injectors with Fuel System Cleaner?

Using a fuel system cleaner to clean car fuel injectors involves the following specific steps: 1. Hang the cleaner on the car's front hood, locate the engine's fuel supply and return lines, disconnect the return line from its connection point on the engine, and use an appropriate plug to block the return line; 2. Disconnect the fuel supply line from the engine's connection point, select a suitable adapter, and connect the fuel supply line to the cleaner's outlet line; 3. Open the fuel tank cap, remove the fuel pump fuse to stop the fuel pump from working; 4. Unscrew the cleaner bottle cap, add the fuel system cleaner into the storage bottle, tighten the cap, pull up the pressure regulator knob to the minimum position (rotate left to the end), connect the compressed air to the cleaner's air inlet, and slowly rotate the pressure regulator knob to the right to gradually increase the pressure; 5. Check the cleaner and all engine lines and connections for fuel leaks. If any leaks are found, immediately close the cleaner's fuel inlet valve and repair until no leaks occur; 6. Open the cleaner's fuel inlet valve, start the engine, and begin cleaning until all the cleaner is used up (approximately 20-30 minutes); 7. The car will automatically shut off when cleaning is complete. Turn the ignition key back to the OFF position; 8. Remove the cleaner's connections, reconnect the engine's fuel lines as they were originally, start the engine, and accelerate appropriately to check all connections and lines for fuel leaks.

18

2

Share

What is the pure electric range of Tesla in kilometers?

Tesla's pure electric range is between 400 to 660 kilometers, with models including the Model 3, Model S, Model X, and Model Y. Taking the Tesla Model S as an example, its body dimensions are 4979mm in length, 1964mm in width, and 1445mm in height, with a wheelbase of 2960mm, and a curb weight of 2190kg and 2242kg. The front suspension of the Tesla Model S is a double-wishbone independent suspension, and the rear suspension is a multi-link independent suspension. Its total motor power is 493kW, paired with a single-speed electric vehicle transmission.

19

2

Share

What is the Start-Stop Button Symbol?

Start-Stop button symbol is a semi-enclosed circular arrow with a capital letter 'A' inside. Usage of Start-Stop function: 1. Press the start button twice after entering the vehicle; the display will show system self-check after power-on. Complete this process before pressing the brake; 2. Press the ignition button to start the engine and wait for vehicle startup; 3. When accelerating, vehicles equipped with auto-hold will automatically release the electronic parking brake (if seatbelt is fastened) without manual operation; 4. Upon arrival, press brake to stop completely → keep brake pressed → shift to N gear → electronic parking brake will engage automatically; 5. Check if EPB indicator lights up before releasing brake pedal.

20

1

Share

How to reset the tire pressure warning on the X-Trail?

What is the general width of a car in millimeters?

Where is the OBD interface located in the Santana?

How to Cancel the Alarm with a Spare Key?

How to Clean Car Fuel Injectors with Fuel System Cleaner?

What is the pure electric range of Tesla in kilometers?

What is the Start-Stop Button Symbol?

How to reset the tire pressure monitoring light on Baojun 730?

What is the alternative name for the car handbrake lever?

How to Replace a Car Oil Filter?

How to Repair Worn Leather Seats?