How to reset the tire pressure warning on the RX5?

[VanSawyer]

To reset the tire pressure warning light on the Roewe RX5, navigate to the vehicle control interface, touch 'Driving Maintenance,' and enter the tire pressure reset interface. Ensure that whenever the tires are inflated, deflated, or when wheels or tires are replaced, the tire pressure is adjusted to the standard level and the reset operation is performed. Below is information regarding the tire pressure warning light: 1. If the tire pressure monitoring light is on due to a punctured tire, the usual solution is to adjust the front tire pressure to 2.3 and the rear tire pressure to 2.4, then reset the tire pressure warning. 2. If the tire pressure monitoring light is on due to excessive tire pressure, note that a tire pressure range of 2.2~2.5 BAR is safe. However, during summer when temperatures are high, the tire pressure may rise beyond the normal range while driving. In summer, it is advisable to maintain tire pressure at the lower end of the normal range, around 2.2 BAR, while in autumn and winter, it can be adjusted to the higher end, around 2.5. 3. If the tire pressure monitoring light is on due to prolonged driving with low tire pressure, this usually occurs when a tire's pressure is too low, causing the tire temperature to rise during high-speed driving, which in turn increases the tire pressure. In such cases, it is recommended to stop and rest or replace the tire with a spare one promptly.

[StStella]

It's quite simple to reset the tire pressure warning on the Roewe RX5. As an owner who frequently deals with this, here's how I do it: First, check the tire pressure to see if any tire is flat or leaking. The recommended cold tire pressure is around 2.3-2.4 bar, which can be measured using a tire pressure gauge. After inflating, start the car, access the central control screen or the menu button on the left side of the steering wheel, navigate to 'Vehicle Settings', and find the 'Tire Pressure Monitoring' reset option. Click confirm and wait a few seconds for the system to complete the process. The system will automatically learn the new tire pressure after driving for a while. If the warning light remains on, it might indicate a faulty sensor or wiring issue, requiring a visit to the 4S shop. Never ignore this and continue driving, as incorrect tire pressure affects braking distance and increases the risk of tire blowouts, which is dangerous. I also make it a habit to regularly check tire pressure during maintenance to prevent warnings and ensure driving safety.

[LeAshley]

I encountered a tire pressure warning right after buying my car, which really freaked me out. I quickly asked a friend and managed to resolve it. The method to reset it is done inside the car: first adjust all tire pressures to the standard value, usually around 2.2 bar (it's written on the door frame label). Then start the engine, press the info button on the dashboard or access the settings menu on the center screen, find the tire reset icon and tap it, then follow the prompts to confirm the reset. After the system turns off the warning, test drive for a few minutes to let it adapt to the new tire pressure. It's best to check with a simple tire pressure gauge monthly to avoid low pressure or leaks triggering the warning - this ensures both safety and fuel efficiency. Ignoring the warning can be dangerous, potentially causing serious accidents at high speeds. Remember, safety comes first - don't skip DIY checks, and visit a repair shop if needed.

[StellaLee]

It's not difficult to reset the RX5 tire pressure warning. I got familiar with it after trying a few times. After starting the car, select the tire pressure reset button in the settings menu and click confirm. Make sure the tire pressure is normal and there's no air leakage when performing the operation. If the warning light remains on, the sensor might be faulty or there could be a real tire issue – get it fixed immediately without delay.