How to Reset the Tire Pressure Warning on the Roewe 360?

How is reverse driving on highways captured?

Reverse driving on highways is captured through electronic and manual cameras. Electronic cameras: Electronic cameras are generally installed at key sections of the highway, such as the entry and exit ramps, and some cameras may be hidden. The cameras take two photos, for example, one second apart, and then compare them to determine if a vehicle is reversing. Manual cameras: Some sections also employ manual cameras to capture reverse driving on highways. Manual capture typically involves monitoring the surveillance feed. If a vehicle reversing on the highway is spotted on the screen, the operator will control the camera to capture images of the reversing vehicle.

18

5

Share

How many OBD ports does the BMW X1 have?

The BMW X1 has only one OBD port, located under the dashboard on the driver's side. Function of OBD: OBD stands for On-Board Diagnostics. This system monitors the engine's electronic control system and other functional modules of the vehicle in real-time during operation. If any abnormal conditions are detected, it identifies specific faults based on predefined algorithms and stores them as diagnostic trouble codes in the system's memory. OBD Port Design: The OBD port is a 16-pin female connector with a trapezoidal shape. Some vehicle models have a protective cover over the OBD port. Common OBD port colors include black, white, or blue.

15

2

Share

What to Do When the Car Door Handle is Frozen?

If the car door handle is frozen, you can use a hairdryer to melt the ice on the handle, or pour warm water to remove the ice from the door. During winter when temperatures are low, it is recommended not to park the car outdoors. If there is accumulated water in the door gaps, it is very likely to freeze. When the door handle is frozen, never use excessive force to open the door, as this may damage the handle or even the locking mechanism. Car door handles are typically made of 30% glass fiber-reinforced PA6, with the outer shell constructed from a PCABS blend. The structural components behind the handle are made of 30% glass fiber-reinforced PP. These car door handles and lock modules come in a wide variety of shapes, colors, and functionalities.

8

5

Share

How to Tell If a Car Battery Is Good or Bad?

First, inspect the outer packaging to see if there are any scratches or dents. When purchasing a battery, the initial step is to check whether the outer packaging of the electric vehicle battery is damaged or shows signs of being opened. Next, carefully examine the metal terminals at the positive and negative ends of the battery for any signs of rust. Finally, check if there is an anti-counterfeiting label on the battery. Firstly, it enhances the driver's sense of control, significantly reduces the vehicle's fuel consumption, and also improves steering responsiveness, enhances steering return characteristics, and increases the vehicle's stability and safety.

2

0

Share

Where is the reversing radar module located on the Mercedes-Benz E260?

The reversing radar module of the Mercedes-Benz E260 is located on the right side of the trunk. Function of the reversing radar: The reversing radar is a safety auxiliary device when parking or reversing the car. It can inform the driver of the surrounding obstacles through sound or more intuitive display, eliminating the troubles caused by the driver's need to look around when parking, reversing, and starting the vehicle, and helping the driver to eliminate blind spots and blurred vision. The main functions of the reversing radar include: Accurately measuring the distance between the rear of the car and the nearest obstacle; when reversing to the limit distance, it can emit a rapid warning sound to remind the driver to pay attention to braking; it can repeatedly emit a voice warning sound to remind pedestrians to pay attention.

7

5

Share

Is It Normal for the Car to Buzz When Pressing the Accelerator?

It is not normal for the car to buzz when pressing the accelerator. Reasons for the buzzing sound in the car engine: The engine oil has not fully lubricated all components of the engine. After running for a while, the new oil can evenly lubricate all parts of the engine. It could also be due to severe wear and tear, followed by cleaning the internal parts of the engine. Unusual noises during acceleration are generally caused by faults in the fuel system or the engine system. Solution: It is necessary to go to a 4S shop for a systematic inspection of these two systems. Once the fault is identified, prompt repair or replacement of new parts is required.

7

3

Share

How to Reset the Tire Pressure Warning on the Roewe 360?

How is reverse driving on highways captured?

How many OBD ports does the BMW X1 have?

What to Do When the Car Door Handle is Frozen?

How to Tell If a Car Battery Is Good or Bad?

Where is the reversing radar module located on the Mercedes-Benz E260?

Is It Normal for the Car to Buzz When Pressing the Accelerator?

What is the function of the hazard lights automatically turning on during emergency braking?

Does BMW have a 745 model car?

Can a car be inspected in a different location?

What are the dimensions when the rear seats of the Bestune T55 are folded down?