How to reset the tire pressure warning on the JAC Refine M3?

1 Answers
HarperLynn
07/30/25 2:57am
The method to reset the tire pressure warning on the JAC Refine M3 is as follows: After checking the tire pressure, turn on the ignition, press and hold the SET button to clear the tire pressure warning prompt. Then, locate the tire option in the central control screen and select tire pressure reset. During vehicle use, it is necessary to regularly check the tires to ensure the correct tire pressure. The JAC Refine M3 is a compact car under JAC Motors. In terms of body dimensions, its length, width, and height are 4715mm, 1765mm, and 1900mm respectively, with a wheelbase of 2810mm. In terms of power, the vehicle is equipped with a 1.5T L4 150 horsepower turbocharged engine, paired with a 5-speed manual transmission.
Was this review help?
13
5
Share
More Forum Discussions

Why Can't I File My Driver's License?

Most cases of unsuccessful filing are due to the driver's license information not being uploaded or updated in the vehicle management office system, or data delays, which prevent the traffic management system from detecting the new data. This is why vehicle management office staff recommend waiting three days before driving, not because the driver's license is unusable. Relevant information about the driver's license is as follows: 1. Introduction: The People's Republic of China Motor Vehicle Driver's License, commonly referred to as a driver's license or 'driver's permit,' is a mandatory certification for motor vehicle drivers under the laws of the People's Republic of China. 2. Examination Content: The test subjects include traffic regulations and related knowledge, field driving, and road driving (including safe and civilized driving).
16
4
Share

What to Do with Two Beidou Cards in a Truck?

When two people drive the same truck, to avoid fatigue driving, if they forget to turn off the engine and switch cards during the driver change, it will not only cause the Beidou driver card to continue timing and be considered as fatigue driving, but also lead to a mismatch between the Beidou driver card information and the actual driver. This may result in corresponding penalties from traffic police, which is not worth the loss. Motor vehicle drivers committing any of the following violations will be penalized with 1 demerit point: 1. Driving a motor vehicle without using lights as required; 2. Driving a motor vehicle without proper meeting of vehicles as required; 3. Driving a motor vehicle with cargo exceeding the prescribed length, width, or height; 4. Driving a motor vehicle on the road without displaying the inspection qualification mark or insurance mark, or without carrying the vehicle license or motor vehicle driving license.
15
1
Share

What Happens If a New Battery Is Not Fully Charged for the First Time?

Not fully charging a new battery for the first time will not have any significant impact. Below is an introduction to the voltage and current during battery charging: 1. Voltage: The charging voltage for motorcycles is 12V. During the charging process, the voltage typically ranges between 13.5-14.5V. When charged on the vehicle via the rectifier, it will not exceed 15V. If using a charger, the charging voltage is usually around 14V. 2. Current: The charging current for motorcycles should not be too high. It is recommended that vehicle owners avoid using fast charging. During charging, use a current that is half the rated charging current and extend the rated charging time by double.
14
1
Share

How to Steer on Curves?

Methods for steering on curves: Turn the steering wheel to the left for left curves and to the right for right curves. Precautions for steering on curves: 1. Avoid excessive steering wheel rotation; 2. Reduce throttle in advance, apply brakes, slow down the speed, and observe both side mirrors. The functions of a car steering wheel include: audio control, hands-free calling, cruise control, and instrument data switching. The working principle of the steering wheel is: converting force into torque and transmitting it to the steering shaft. The correct way to hold the steering wheel is: imagine the steering wheel as a clock face, with the left hand at the nine o'clock position and the right hand at the three o'clock position, thumbs naturally pointing upwards and the other four fingers pointing downwards.
14
4
Share

What does xdrive mean on the back of a BMW?

BMW with xdrive on the back indicates that the vehicle is equipped with a four-wheel drive system. xdrive is an intelligent all-wheel drive system developed by BMW. Taking the BMW X6 2021 xDrive40i Premium M Sport Package Edition as an example, its body dimensions are: length 4947mm, width 2004mm, height 1698mm, with a wheelbase of 2975mm. The BMW X6 2021 xDrive40i Premium M Sport Package Edition is powered by a 3.0T 340 horsepower L6 turbocharged engine, with a maximum power of 250 kilowatts and a maximum torque of 450 Newton meters, paired with an 8-speed automatic transmission.
15
1
Share

What to Do When BMW Tire Pressure Warning Light Comes On

BMW tire pressure warning light comes on the processing method is: 1. If it is a simple air leak, just inflate the tire; 2. If there is damage, timely repair or replacement is needed; 3. Check the dashboard fault and repair it in time. The hazards of BMW tire pressure loss are: 1. Increased tire body deformation, which can easily cause cracks on the tire side; 2. Excessive heat promotes rubber aging, fatigue of the cord layer, and cord breakage; 3. Increased contact area accelerates wear on the tire shoulder. Taking the BMW x740i as an example, it is a 5-door, 7-seat large SUV with body dimensions of: length 5163mm, width 2000mm, height 1835mm, and a wheelbase of 3105mm.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.