How to reset the tire pressure warning on the Emgrand GL?
2 Answers
Methods to reset the tire pressure warning on the Emgrand GL: 1. Press the vehicle's one-touch start button to start the engine; 2. The dashboard will display the tire pressure information; 3. Press the SET button on the left side of the multifunction steering wheel; 4. Then press the MODE button on the right side of the multifunction steering wheel; 5. Press the cancel button on the left side of the multifunction steering wheel again; 6. Observe the vehicle dashboard, and the tire pressure warning should disappear. The Emgrand GL is the fourth model in Geely's premium 3.0 series, filling the gap in Geely's A+ sedan market. In terms of body dimensions, it measures 4725mm in length, 1802mm in width, and 1478mm in height, with a wheelbase of 2700mm.
Having driven my Emgrand GL for over three years, I've learned the ropes of common tire pressure warning issues. When the warning light comes on, don't panic—it's usually due to low or high pressure in one tire. First, use a reliable pressure gauge to check all tires against the recommended values on the door frame sticker (typically around 2.3 bar front and 2.1 bar rear for the Emgrand GL). After adjusting to standard, ensure the car is parked on level ground with the engine running but stationary. Use the left steering wheel button to access the settings menu, select Vehicle Information > Tire Monitoring > Reset Confirmation Key, and hold for a few seconds. The warning should disappear after system reset. If the light persists, it might indicate a sensor fault or air leak, requiring a dealership visit. Check tire pressure regularly—at least monthly—to prevent uneven wear and fuel consumption spikes. Pay extra attention before long trips; safe driving relies on these maintenance details.
