How to Reset the Tire Pressure Warning on JMC Transit?
4 Answers
First, start the vehicle and turn on the central display screen. Then, press the MENU button on the control lever. Select and click the Vehicle Information menu. At this point, rotate the adjustment wheel until the Oil Life option appears, then select and click the Oil Life option. Press the SET/CLR button to reset the system. When prompted to confirm the oil life reset, rotate the adjustment wheel to select 'Yes' and confirm. The oil life will then be successfully reset.
Last time I drove my own JMC Transit, I also encountered the issue of the tire pressure warning light coming on, and I was really anxious as it happened on the highway. The most straightforward solution is to first find a safe place to pull over and check the tire pressure of each tire to see if any are too flat or overinflated. The standard tire pressure values are usually listed on a label attached to the door frame—just adjust accordingly. For example, in summer, tire pressure tends to drop, so it's good to add some air when the tires are cold; in winter, it might be higher, so you can let out a bit of air. After adjusting, start the car and drive slowly for about ten minutes. The system will automatically detect the normal pressure, and the warning light usually goes off. If it doesn't, there might be a minor sensor issue or a wiring problem. In that case, it's best not to push it and instead drive to a nearby repair shop for a professional check. I always remind myself to maintain the car regularly, like checking tire pressure monthly and adjusting it seasonally, to avoid the hassle of warning lights. Also, addressing the warning light as soon as it appears can prevent premature tire wear, saving money and ensuring safety. Remember, safety comes first when driving—don't let small issues lead to big problems.
I usually enjoy tinkering with car-related matters, and resolving the tire pressure warning on the Jiangling Transit is actually not difficult. The main reason is that the tire pressure deviates from the normal range, triggering the sensor to light up and sound an alarm. The steps to handle it are: first, use a tire pressure gauge or visit a gas station to check the tire pressure, then adjust it according to the recommended values in the vehicle manual. Typically, for the Transit, the front tires should be at 2.4 bar and the rear tires at 2.6 bar when the vehicle is cold—release air if it's too high or inflate if it's too low. After adjusting, start the engine and drive at low speed to let the system re-detect the pressure. The warning should disappear after a few minutes. If it doesn’t, you might need to perform a simple system reset, such as turning off the engine, removing the key, waiting for half a minute, and restarting. Alternatively, check if there’s a physical reset button under the steering wheel to press. If the warning persists, it’s likely due to sensor aging or a tire leak, which should be addressed promptly to avoid a higher risk of a blowout. I recommend developing good habits for daily car use, such as purchasing a tire pressure monitoring tool to keep an eye on it regularly, so you won’t be caught off guard when the alarm goes off. Don’t skimp on tire maintenance—it helps save fuel and ensures safer driving.
I've driven the Jiangling Transit a few times, and the tire pressure warning light coming on is quite common. As long as the tire pressure is fine, first check and adjust it to the standard value, then drive for a short while, and the light should go off automatically. If it doesn't, check the sensor or take it to a shop for repair—safety is the top priority.
