How to reset the tire pressure warning on Baojun E200?

1 Answers
Donna
07/30/25 2:11am
You can reinflate and adjust the tire pressure. After inspection, if all tires are normal, ensure the tire pressure is correct, ideally with all four tires having the same pressure. A normal range of 2.4–2.6 BAR is acceptable. In summer, the tire pressure can be slightly lower, or if you frequently drive on dirt roads, the pressure can also be slightly lower. Once the tire pressure is normal, there are several ways to reset the tire pressure warning icon, which may vary by vehicle. Some methods include holding down a physical button or accessing settings in the dashboard menu. After resetting the warning, restart the vehicle to continue driving.
Was this review help?
15
2
Share
More Forum Discussions

How to Reset the Oil Maintenance Light on a Honda Civic?

Press the "A" button and hold the brake pedal down; neither should be released midway. Turn the power to the "ON" position without starting the engine. Characters will flash or the display will blink. Continue holding the "A" button without releasing it, then release the button and the brake. Turn the ignition switch back to the "Off" position. Turn the power to the "ON" position without starting the engine. Press the "Display/Info" button, then press and hold the "Enter" key without releasing it.
10
3
Share

How to Use Volkswagen Cruise Control?

After setting the desired speed and turning on the switch, the system automatically maintains the vehicle speed without requiring you to press the accelerator pedal, allowing the car to travel at a fixed speed. Press the main cruise control switch, and the system compares pulse signals with the preset speed to calculate and ensure the most precise fuel supply for the vehicle.
7
5
Share

What to Do When the Mercedes Steering Wheel Locks Up?

If the car steering wheel is locked and the key won't turn, don't panic. You can try turning the steering wheel while simultaneously turning the key. Coordinating these two actions should unlock it. The rotation of the key controls a steel pin via a spring mechanism, which serves as an anti-theft feature.
2
0
Share

How to File an Insurance Claim for a Broken Transmission?

Generally, after a vehicle accident occurs, it is necessary to go through the traffic police department to determine the responsibilities of both parties. This is both a requirement of the insurance company and a regulation under traffic laws. It is important to check the oil level. The transmission fluid should be at the bottom of the filler hole. If the oil level is low, add transmission fluid and then reinstall the plug.
7
2
Share

What are the six wires of the electronic throttle pedal?

The six wires of the electronic throttle pedal consist of two power wires, two ground wires, and two signal wires. When the throttle pedal is pressed, one potentiometer signal rises while the other falls. The ECU receives these signals and controls the throttle motor to rotate at a certain angle, ensuring the required air intake for various operating conditions. If one signal rises while the other does not fall, the ECU detects an issue with the throttle pedal sensor and illuminates the EPC light. Common faults in electronic throttle pedals include sensor malfunctions or damage. In such cases, the ECU cannot detect the throttle position, leading to unstable idling, throttle sticking, unresponsive acceleration, and ultimately rendering the vehicle inoperable. Working principle of the six-wire throttle pedal: It uses a position sensor to transmit signals indicating the depth and speed of throttle pedal depression. These signals are received and interpreted by the vehicle's onboard computer, which then issues control commands to adjust the throttle opening angle accordingly, either rapidly or gradually. Introduction to the throttle: In internal combustion engine vehicles, the throttle is the device that controls the fuel supply. Its function is to regulate the throttle valve opening, thereby controlling the flow of the air-fuel mixture, adjusting engine speed and power to meet the demands of vehicle operation.
4
0
Share

How to Identify Genuine Mobil 1?

Genuine products use laser anti-counterfeiting labels, which most counterfeit products lack. Even if some fakes have them, the labels are not firmly attached and can be easily peeled off. The characters at the bottom of genuine bottles are printed clearly and neatly, with uniform thickness and distribution of vertical ridges, giving a high-end impression. The production date and batch number of genuine Mobil 1 are pressed integrally by machine in one go, not simply sprayed on like ordinary products.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.