How to Reset the Tire Pressure Warning Light on the Honda Avancier?
4 Answers
The method to reset the tire pressure warning light on the Honda Avancier is: 1. Start the engine and keep the gear in P position; 2. Select 'Home' on the central control screen to enter the settings interface; 3. Choose the vehicle menu; 4. Select the 'Tire Pressure Monitoring System Calibration' option to complete the calibration. The Honda Avancier is a 5-door, 5-seater midsize SUV with body dimensions of 4858mm in length, 1942mm in width, and 1670mm in height, with a wheelbase of 2820mm. It is equipped with a 1.5T turbocharged engine and a CVT continuously variable transmission, delivering a maximum power of 142 kW and a maximum torque of 243 Nm. The suspension system features MacPherson strut independent suspension at the front and multi-link independent suspension at the rear.
I've been driving the Avancier for over three years and encountered the tire pressure warning light several times. The reset method is actually quite simple. First, after parking, check all tire pressures - the standard value is around 240 kPa (you can find the exact recommendation on the driver's door frame). Then inflate underpressured tires or use a pin to release excess air to the correct level. Second, drive the vehicle slowly for 10-15 minutes - the system will automatically recognize normal pressure and the light will go off. If the light remains on, manually reset it: enter the settings menu on the center display, find the vehicle options, select the tire pressure calibration/reset function and tap it. Some situations like sensor battery depletion or slow leaks from punctures may affect the system, so I recommend regular tire pressure and condition checks to avoid high-speed risks. I've tried this method several times and it always works.
When I first drove the Accord, I was particularly afraid of the tire pressure warning light coming on, and I would get nervous whenever I saw it. After seeking advice, I learned a trick: park and turn off the engine, use a tire pressure gauge to check each tire (target around 35 PSI), inflate them properly, then start the engine and drive at low speed for about five to six minutes to see if the light goes off. If it's still on, refer to the owner's manual for reset instructions—usually done through the steering wheel buttons to navigate the menu and reset. Don't ignore this issue; low tire pressure wastes fuel and is dangerous. Make it a habit to check the pressure every two weeks, as it can fluctuate in hot or cold weather. Driving feels much safer now. Learning maintenance from mistakes is quite useful.
Turning off the CR-V's tire pressure light is not difficult. First, stop and measure the tire pressure, then adjust it to the standard value of 32 PSI. Take a short drive for a few minutes to allow the system to reset and the light to turn off. If that doesn't work, perform a reset via the center console. Safety first—always keep a tire pressure gauge handy for simple solutions.
