How to reset the tire pressure warning light on the Elysion?

[VonAshlyn]

The method to reset the tire pressure warning light on the Elysion is: 1. Select the tire pressure monitoring system calibration option in the vehicle settings menu on the central display; 2. Follow the prompts to reset the tire pressure warning light. Taking the 2019 Elysion as an example, it is an MPV with body dimensions of 4950mm in length, 1842mm in width, 1711mm in height, and a wheelbase of 2900mm. The curb weight is 1941kg. The 2019 Elysion features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 146PS, a maximum torque of 175Nm, and a maximum power of 107kW, paired with an electronic continuously variable transmission.

[LeHolden]

I'm always into cars, and when the tire pressure light comes on, it's the TPMS (Tire Pressure Monitoring System) alerting you. It could be due to low pressure, a leak, or sensor issues. Before resetting, it's crucial to check the tire pressure: use a tire gauge to measure all four tires and the spare, ensuring they're inflated to the standard value, usually found on the door frame or in the manual. For your Elysion, the reset method is straightforward—first, park the car and start the engine or turn the key to the ON position without starting the engine; then, look for a button labeled SET, TPMS, or a tire pressure icon in the lower left area of the steering wheel or on the center console, hold it for a few seconds until the light flashes a few times and goes off. After that, drive around for 10-20 minutes to let the system recalibrate. If the light stays on, it might be a sensor malfunction requiring a professional check. Don't underestimate it—tire issues can lead to unstable handling and increase accident risks. It's recommended to check tire pressure monthly to prevent the light from coming on.

[AlinaDella]

When repairing cars, it's common to encounter the situation where the Odyssey's tire pressure warning light comes on. Resetting it is actually quite simple. First, park the car on level ground and turn off the engine, don't rush to press any buttons. Use a tire pressure gauge to check each tire's pressure one by one, inflating them to the correct level—measurements are accurate only when the car is cold. The reset is done via a reset button, located either on the left side of the dashboard or in a small recess behind the steering wheel. Press and hold it until you hear a beep or the light goes off, then release. Driving for a while usually resolves the issue. If the light keeps coming on, check for leaks at the valve stem or tire damage—the sensor might also be faulty and need replacement. For safety, don't ignore it; repair it early to avoid the risk of a blowout. Also, pay attention to road conditions and avoid potholes to extend tire life.

[LeAbigail]

Quick Fix for TPMS Light Reset: Park and check tire pressure; if too low, inflate to the manual's specified value. Start the engine, locate the reset button near the steering wheel (may be labeled SET), hold for 5-10 seconds until the light turns off. Drive for 15 minutes to allow the system to reset. Ensure no tire leaks.