How to reset the tire pressure warning light on the 2021 Classic Sylphy?

1 Answers
MacEmmanuel
07/24/25 11:03pm
First, inflate the tires to the normal pressure range. Use the multifunction steering wheel buttons to locate the tire pressure monitoring system settings in the trip computer. This step needs to be performed with the ignition on. After entering the menu, find the tire pressure reset option and press it to restore the tire pressure values. The S-curve dynamic design creates a stylish and elegant exterior, while the 2700mm ultra-long wheelbase provides ample rear legroom for comfortable seating.
Was this review help?
19
0
Share
More Forum Discussions

At what tire pressure level is it unsafe to drive?

Tire pressure below 1.7 bar is unsafe for driving. Below are relevant introductions about tire pressure: 1. Tire pressure location; Open the fuel filler cap, where there is a standard tire pressure chart for the vehicle model. The most suitable tire pressure is the one marked on this chart. If there is none at the fuel filler cap, open the four doors, and the tire pressure will be marked on the door pillar. 2. Tire pressure range; After the car is driven, tire pressure rising by 0.1-0.2 points is normal. As long as the tire pressure difference is not significant, within 0.1-0.2, it is acceptable. The recommended tire pressure should be based on the manufacturer's recommendation. The recommended window pressure can usually be found in the following places: the vehicle user manual, the label near the driver's door (B-pillar), the drawer next to the driver's seat, or the fuel tank cap. 3. Measure tire pressure at least three hours after parking or if the tires have not been driven more than 2 kilometers. If you can only measure tire pressure when the tires are hot, subtract approximately 0.3 bar (=4 psi) from the measured value to get the tire's cold inflation pressure. The minimum should not be lower than the recommended value for half-load, and the maximum should not exceed the recommended value for full-load. Within this range, you can control it yourself. Regarding tire pressure, the standard tire pressure is around 2.5, with a fluctuation of 0.2. In summer, the tire pressure should be slightly lower, and in winter, it should be slightly higher.
5
5
Share

Can Used Cars Be Serviced at 4S Stores?

Used cars can indeed be serviced at 4S stores, but the maintenance costs for out-of-warranty vehicles will differ significantly from those still under warranty. Owners can make their choice based on personal circumstances. 4S stores are considered orthodox maintenance channels, equipped with comprehensive facilities and staffed by experienced technicians who can accurately diagnose vehicle faults. If purchasing a used car, you can also check the vehicle's maintenance records at a 4S store. The car maintenance cycle refers to the interval in mileage or time between services. A high maintenance frequency is not a bad thing, as it more effectively ensures vehicle performance. In the early stages of vehicle use, regular maintenance is the focus, with relatively lower costs. After a certain number of years or mileage, the vehicle enters a maintenance-intensive period where costs become relatively higher. Key car maintenance items include: Oil Change: Engine oil must be replaced as it is often referred to as the "blood" of the engine. The engine is the most critical and vulnerable component of a vehicle, and any issues with it can severely impact the car's usability. Oil and Filter Replacement: Replacing the oil filter is essential as it helps filter out impurities such as dust, carbon deposits, and metal particles from the oil, thereby better protecting the engine. Fuel Filter Replacement: The requirements for fuel filters are not particularly high, as frequent replacement is unnecessary. The replacement cycle for fuel filters should follow the vehicle's manual, as different cars have varying time and mileage intervals for replacement. Cabin Air Filter Replacement: The cabin air filter effectively filters the air inside the car, creating a better driving environment. The replacement standard is when odors are detected or during seasonal changes. Coolant Replacement: Coolant primarily prevents freezing in winter, boiling in summer, and also prevents scaling and corrosion. Brake Fluid Replacement: Brake fluid should ideally be replaced after 40,000 kilometers, though this can vary based on the vehicle's specific conditions. In most cases, the 40,000-kilometer guideline can be followed. Power Steering Fluid Check: Power steering fluid is crucial as it is the hydraulic oil used in the car's power steering pump. It facilitates easy steering wheel operation and, like automatic transmission fluid and brake fluid, should be replaced periodically. Fuel Filter Replacement: The fuel filter removes solid residues (such as compounds and dust) from the fuel, protecting the fuel pump, injectors, cylinder liners, and pistons. It significantly reduces wear and prevents blockages. Replacement should follow the mileage specified in the vehicle's manual. Spark Plug Replacement: Spark plugs play a vital role. After extended use, uneven engine operation may occur, causing vehicle vibration. In severe cases, cylinder deformation can happen, and the engine may become more fuel-efficient. Spark plugs should be replaced at 60,000 kilometers, but immediate inspection is necessary if they fail or fuel consumption increases. Transmission Fluid Replacement: Transmission fluid does not require urgent replacement. Its primary purpose is to ensure proper transmission operation and extend its lifespan. After replacement, gear shifts will feel smoother, preventing transmission vibration, unusual noises, and gear jumping. If abnormal shifting, vibration, or gear jumping occurs, the transmission fluid should be checked promptly. Brake Pad Inspection: There is no uniform standard for brake pad replacement. If braking feels ineffective, inspect the brake pads to determine if replacement is needed. Tire Inspection: Used car tires often show some degree of wear. During inspection, pay attention to tread patterns, cleanliness, and grip. Even if tires appear new with deep treads, the rubber may have hardened. Spare tires may also suffer from hardening or other defects due to prolonged disuse or poor maintenance. Therefore, inspect both regular and spare tires and address any issues promptly. Air Conditioning Cleaning: The air conditioning system interacts with air daily, accumulating impurities, dust, bacteria, and viruses that can clog components like the evaporator. These contaminants, including dirt, nicotine, and mold, pose potential health risks. Microorganisms multiply quickly, often leading to unpleasant odors. When the AC is turned on, these odors mix with the cool air, polluting the cabin and causing discomfort. Regardless of the used car's age or mileage, a thorough AC cleaning is recommended after purchase.
1
3
Share

How is the quality of Changan Eado DT?

Changan Eado DT has relatively reliable quality without any serious quality issues. Here are the relevant details: 1. Changan Eado DT is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 125, paired with a 4AT transmission. In daily driving, the Eado DT performs well in terms of smoothness. 2. Changan Eado DT has put great effort into the design and materials of its interior. The brown and black dual-tone interior looks quite premium. Despite the affordable price, the central control system is not missing; instead, it offers owners an experience that exceeds expectations in terms of display fineness and screen size.
18
1
Share

What are the steps for starting and turning off the 2020 Magotan?

2020 Magotan starting and turning off steps are as follows: 1. Starting steps: (1) Press the brake pedal, then press the start button to ignite and start the engine. (2) Release the foot brake, you can choose to warm up the car in place for 1-3 minutes. (3) Turn on the turn signal, press the foot brake again, shift to D gear, and release the handbrake. (4) Slowly release the foot brake, add some throttle, and the starting is completed, then return the turn signal to its original position. 2. Turning off steps: (1) Stop the car and press the brake pedal, shift the gear to N. (2) Release the foot brake, pull the handbrake. (3) Turn off the engine, shift to P gear. The 2020 Magotan comes standard with full LED headlights. The design of the headlights is sharp-angled, and the concave corners are perfectly connected with the chrome strip under the grille, giving the headlights and grille a strong sense of unity.
15
0
Share

Is Shanghai Volkswagen a Domestic Car?

Volkswagen is not a domestic car; it is a German brand. Here is some knowledge about Volkswagen AG and the Volkswagen brand: Volkswagen AG: Volkswagen (German: Volkswagen) is an automobile manufacturing company headquartered in Wolfsburg, Germany, and is the core enterprise of the Volkswagen Group, one of the world's four largest automobile manufacturers. Volkswagen Brand: The Volkswagen brand is divided into three types: FAW-Volkswagen, Shanghai Volkswagen, and Volkswagen Germany. Among them, FAW-Volkswagen is a joint venture between Changchun FAW and Volkswagen Germany. Shanghai Volkswagen is a joint venture between Shanghai Automotive Industry Corporation and Volkswagen Germany. Therefore, both Shanghai Volkswagen and FAW-Volkswagen are jointly produced cars, while Volkswagen Germany, being produced in Germany, is an imported car.
14
5
Share

What are the causes of Mazda 5 transmission failure?

Mazda 5 transmission failure reasons are as follows: 1. Engine idle speed is too high, causing delayed upshifting. 2. Improper adjustment of throttle cable or throttle position sensor, resulting in excessive main oil circuit pressure. 3. Faulty main oil circuit pressure regulator valve, causing excessive main oil circuit pressure. 4. Damper accumulator piston stuck, unable to provide damping effect. 5. Missing one-way valve steel ball, causing shift components to engage too quickly. 6. Slipping shift components, oil pressure solenoid valve not working. 7. Faulty electronic control unit (TCU). Symptoms of Mazda 5 transmission failure include: severe vibration when shifting from Park or Neutral to Reverse or Drive during startup; noticeable jerking during automatic transmission upshifts while driving.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.