How to Reset the Tire Pressure Warning Light on a Jade?

Why Does a Brand New Car Have a Burnt Smell?

It is normal for a brand new car to have a burnt smell. Here are some explanations regarding the burnt smell in a new car: 1. Reasons: Many parts of a car operate at high temperatures during use. Some plastic and other material components in a new car may emit odors under high heat, which will dissipate over time. However, during the break-in period, it is important to avoid sudden acceleration and keep the engine RPM within a reasonable range. 2. Other related reasons: (1) If the smell resembles burning plastic, it is likely caused by overheating electrical wiring. Burnt wires are usually accompanied by localized heat or smoke. With careful inspection, the source of the issue can be identified. If the wiring is overheating, the car must be stopped immediately to determine the cause. Although the smell of burnt wiring may not be strong, the risk is significant. Failure to detect it promptly can lead to circuit damage, engine seizure, or even a vehicle fire. (2) If you consistently smell unburned gasoline while driving, you must stop and check for fuel leaks and their severity before continuing. Both fuel-injected and carbureted vehicles may experience aging and cracking in fuel lines after prolonged use. Under slight vibration or changes in line pressure, fuel may leak from these areas. (3) Electrical issues, such as short circuits, aging wires, or excessive load, can also cause a burnt smell. The wiring may burn out shortly afterward. However, such problems are unlikely in a brand new car, so this possibility can be ruled out.

20

3

Share

Is it normal for newly applied car window film to appear blurry?

It is normal for a car with newly installed window film to have some moisture visible immediately after application. Below is an explanation about the blurriness of newly applied car window film: 1. Principle: It is common to experience this situation within 7 days of film application. This occurs because water is used during the installation process, leaving some moisture trapped under the film. As the moisture gradually dries, the film will become increasingly clear. If the blurriness persists after 7 days, it is advisable to consult the installation shop, as it may be due to installation issues or the quality of the film itself. 2. Causes: (1) Poor clarity of the film itself: Clarity and light transmittance are not entirely equivalent. Some films with high light transmittance may still cause visual distortion. The clarity of car window film depends on the material and manufacturing process, such as V-KOOL's optical PET base material, multiple precious metals, and molecular-level magnetron sputtering technology. (2) Scratches or corrosion during use: Although car window film is applied to the interior of the car, operations like rolling the windows up and down or cleaning the glass can easily scratch or damage the film. Once damaged, the film's clarity will naturally decrease. Therefore, when cleaning the glass, it is recommended to use non-corrosive cleaning solutions and soft, grit-free towels for wiping. Additionally, for car models with narrow gaps in the side windows, avoid applying overly thick security films. Instead, opt for car window films with excellent scratch-resistant coatings.

19

5

Share

What is the reason for not being able to shift gears?

The reasons for not being able to shift gears: internal failure of the gear lever assembly; failure of the P-gear lock solenoid valve inside the gear lever, or failure of the brake switch. Here is some additional information: 1. Gear shifting: Gear shifting refers to the transmission, which is used to change the torque and speed of the engine crankshaft to meet the different requirements of traction force and speed for driving wheels under various driving conditions such as starting, accelerating, driving, and overcoming road obstacles. 2. Function: Gear shifting allows the car to drive at a very low and stable speed, which is difficult to achieve solely by the minimum stable speed of the internal combustion engine. The reverse gear of the transmission enables the car to move backward, and its neutral gear allows the engine to be separated from the transmission system for a long time when starting the engine, parking, or coasting.

19

3

Share

What does the GAC Trumpchi logo mean?

GAC Trumpchi's logo is a "G"-shaped emblem, which is the first letter of the English abbreviation "GAC" for GAC Group, and also serves as the product identifier for GAC Motor. Below are some additional details: 1. GAC Motor: It is a wholly-owned subsidiary of Guangzhou Automobile Group Co., Ltd., serving as the implementation vehicle for GAC Group's independent brand passenger car projects. 2. The "G" emblem: The "G" is derived from the first letter "G" of the English abbreviation "GAC" for GAC Group. It not only represents a new interpretation of "Excellence and Expansion" but also symbolizes Globalization, Genius, Glory, Greatness, and Guarantee.

7

2

Share

How to reset the tire pressure monitoring system on a Haval H6?

The method to reset the tire pressure monitoring system on a Haval H6 is: 1. Ensure the tire pressure is correct; 2. Park on level ground, turn off the engine, then power on the vehicle; 3. Press and hold the tire pressure monitoring button for 5-6 seconds until you hear an alarm sound, then release the button to complete the reset. The Haval H6 is a compact SUV with body dimensions of: length 4653mm, width 1886mm, height 1730mm, and a wheelbase of 2738mm. It is equipped with a 2.0L turbocharged engine delivering a maximum horsepower of 211PS and a maximum torque of 325Nm, with peak torque available between 1500 to 4000 rpm. The front suspension uses a MacPherson strut independent suspension, while the rear suspension employs a double-wishbone independent suspension.

13

1

Share

What Causes Yellow Stains on the Car Roof Liner?

Yellow stains on the interior roof liner of a car may be caused by minor water seepage. Below is relevant information about car roof liners: Positioning: Car roof liners are typically wrapped with roof fabric to enhance the interior decoration, reduce cabin noise, and provide comfort and safety for passengers. Function: Car roof fabric is primarily made of textiles, chosen for their good elasticity and extensibility. Through special processing, the fabric is endowed with wear resistance and flame retardancy to meet various standards for car roof liners. The car roof liner also serves to decorate the interior, with various color design options available.

5

Share

How to Reset the Tire Pressure Warning Light on a Jade?

Why Does a Brand New Car Have a Burnt Smell?

Is it normal for newly applied car window film to appear blurry?

What is the reason for not being able to shift gears?

What does the GAC Trumpchi logo mean?

How to reset the tire pressure monitoring system on a Haval H6?

What Causes Yellow Stains on the Car Roof Liner?

What brand is sunfull tire?

What is the matching standard between gear shifting and speed?

What is the fault when the EPC light comes on in S gear?

Does Rain Affect a Newly Applied Color Change Film?