How to reset the tire pressure warning light on a Honda CR-V?
3 Answers
The method to reset the tire pressure warning light on a Honda CR-V is as follows: 1. Press the arrow button at the lower right corner of the steering wheel until the central screen displays "Personal Settings"; 2. Press the SEL/RESET button, and the central screen will show "Enter TPMS Calibration"; 3. Press the SEL/RESET button again, and the central screen will display "Set TPMS Calibration"; 4. Press the arrow button at the lower right corner of the steering wheel, and the central screen will show "Calibration"; 5. Press the SEL/RESET button, and the central screen will display "Calibration Started". The warning light will reset after a few seconds. Taking the 2021 Honda CR-V as an example, it is a compact SUV with the following dimensions: length 4621mm, width 1855mm, height 1679mm, wheelbase 2661mm, fuel tank capacity 53L, and curb weight 1506kg.
That day I noticed the tire pressure warning light on my Honda CR-V was on, and I felt a bit panicked. I quickly found a safe place to pull over and used a tire pressure gauge to check all four tires. Sure enough, the right front tire was underinflated. After refilling it to the standard pressure, the light still didn’t go off. Then I remembered the manual mentioned a manual reset was needed. I started the engine, found the settings button on the steering wheel, pressed it a few times to enter the menu, selected the tire pressure calibration option, and confirmed the reset—then the light went off. During my next maintenance visit, I asked the mechanic about it. He said that in winter, lower temperatures cause tires to contract, which can easily trigger false alarms, so checking the tire pressure once a month can help avoid trouble. He also reminded me not to drive at high speeds when the light is on, as it increases the risk of a blowout.
The tire pressure monitoring system in the Honda CR-V is quite sensitive – when the warning light comes on, you should check immediately. I've experienced this several times myself, and it was always caused by slow leaks in the tires. The reset method is simple: first park the car safely and ensure the pressure is correct (usually the standard values are listed on the door frame). Then, with the engine running, use a button combination on the steering wheel – typically press the Menu button to enter the settings menu, select the tire pressure reset option, and confirm. If the light remains on, it might be due to dirty sensors or battery issues, requiring professional inspection. When driving daily, avoid hitting potholes to prevent damaging the sensor system. Remember, tire pressure directly affects fuel efficiency and safety – don't underestimate its importance.
