How to reset the tire pressure warning light on a BYD vehicle?

[VanOwen]

BYD tire pressure warning light reset method: 1. Press the one-button start button on the BYD Qin to start the vehicle engine; 2. Click the reset button on the right side of the multifunction steering wheel; 3. Click the confirm button on the left side of the multifunction steering wheel. BYD models include: BYD Yuan, BYD Song, BYD Tang, BYD Qin ev300, BYD Qin, BYD s7, BYD s6. Taking the 2021 BYD Song as an example, its body dimensions are: length 4600mm, width 1830mm, height 170mm, wheelbase 2660mm, and fuel tank capacity 60l.

[DeLola]

I've been driving a BYD for several years and have encountered the tire pressure warning light coming on a few times, which usually indicates abnormal tire pressure. The reset method is quite simple: First, park and check if all tire pressures meet the standard, typically indicated on a label near the door with recommended values. After confirming the pressure is correct, locate a button near the steering wheel or on the dashboard marked with a tire pressure or TPMS icon. Hold it for five to ten seconds, and the light will go off. Some newer models require operation through the instrument panel settings menu, using the steering wheel buttons to access the system reset option. After completion, drive a short distance to allow the system to self-check. The key is to regularly monitor tire pressure to avoid the risk of a blowout while driving. If the light remains on after resetting, it might be a sensor malfunction, and you should visit a 4S store. Maintaining tires is as important as taking care of your health to prevent diseases in advance—don't be careless.

[Teri]

As someone who often helps friends with car repairs, resetting the BYD tire pressure light requires a step-by-step approach. After ensuring the tire pressure is correct, locate the reset button—its position varies by model: Qin series usually have it in the steering wheel button area, while Song series may place it on the center console. Press and hold the button until the light turns off. For older models, you might need to press the brake pedal while holding the button. Remember, resetting isn't a cure-all—if the light keeps coming on, it could indicate a faulty wheel speed sensor or a slow tire leak. Check tire pressure when the tires are cold to avoid extreme temperature effects on readings. Make it a habit to check monthly with a digital tire gauge, which is more accurate than the car's system. Addressing issues early can save money and ensure road safety—never ignore the warning and keep driving.

[McHeidi]

When I was younger, I drove carelessly and just randomly pressed the tire pressure warning light when it came on, which caused problems. Actually, the tire pressure reset operation for BYD isn’t complicated: first, pull over safely and check if the pressure in all four tires is consistent and within the standard range. Then, locate the tire pressure reset button—usually near the steering column or dashboard—and hold it down for a few seconds until the warning light turns off. Some models require you to start the engine and select the tire pressure reset option via the steering wheel menu. After resetting, drive slowly to allow the system to recalibrate the data. Always remember that abnormal tire pressure is a warning sign of a potential blowout—resetting is only a temporary fix. You should investigate the root cause, such as a nail puncture, and it’s advisable to get a thorough inspection afterward to ensure worry-free long-distance driving. Safety always outweighs convenience. The lessons from experienced drivers don’t come easy—don’t repeat the same mistakes.