How to reset the tire pressure warning light on a 2017 Outlander?
1 Answers
The method to reset the tire pressure warning light on a 2017 Outlander: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "dong" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, completing the tire pressure reset. Precautions for inflating tires: Always use a pressure gauge to check the tire pressure to avoid over-inflation, which could cause the tire to burst. After stopping the vehicle, wait for the tires to cool down before inflating, as the tire temperature rises during driving, affecting the pressure. Check the valve stem. If the valve stem and valve core are not properly aligned, have protrusions or depressions, or other defects, it may be difficult to inflate or measure the pressure. Pay attention to cleanliness when inflating. The air being pumped in should not contain moisture or oil, as this could deteriorate and damage the inner tube rubber. Do not exceed the standard pressure too much when inflating and then release air, nor should you over-inflate the tires because you haven't been able to inflate them for a long time while traveling. Exceeding the standard pressure too much can cause the cords to overstretch, reducing their strength and affecting the tire's lifespan.