How to reset the tire pressure warning light on a 2017 Haval H6?

1 Answers
Vernon
07/25/25 4:39am
First, use a diagnostic scanner to check if the warning light is displaying an error. Then, use a tire pressure gauge to verify that the tire pressure is within the range of 1.6-2.7 Kpa. If the pressure is abnormal, adjust it by deflating or inflating as needed. In case of tire damage, replace the tire promptly. After the tire pressure is corrected, the warning light should turn off after driving for a short distance.
Was this review help?
13
0
Share
More Forum Discussions

Where is the fuel filter located on the Kia K3?

The fuel filter of the Kia K3 is located inside a cover beneath the rear seat cushion. You can access it by opening the cover. Function of the fuel filter: The fuel filter is designed to remove water and impurities from the gasoline. When the engine is running, fuel is drawn by the fuel pump through the inlet pipe into the sediment bowl of the filter. Types of fuel filters: Fuel filters are categorized into carburetor type and fuel injection type. In carbureted gasoline engines, the fuel filter is located on the inlet side of the fuel pump, operating under lower pressure, and typically features a nylon housing. In fuel-injected engines, the fuel filter is situated on the outlet side of the fuel pump, handling higher pressure, and usually comes with a metal housing.
2
2
Share

What is Tesla's Stop Mode?

Explanation of Tesla's Stop Mode is as follows: Energy recovery level: Creep provides an experience closest to that of gasoline-powered vehicles, with low energy recovery; it can maintain a pure electric vehicle experience with high energy recovery. Driving feel: When Creep is selected (or in a fully stopped state), the motor continues to apply torque, driving the vehicle slowly forward (in Drive) or backward (in Reverse), similar to traditional vehicles with automatic transmissions; Hold can be understood as one-pedal mode—pressing the accelerator deeply results in faster speed, pressing lightly results in slower speed, and completely lifting off triggers strong energy recovery, equivalent to light braking, and can bring the vehicle to a complete stop. After stopping, AUTOHOLD vehicle hold is automatically activated, eliminating the need to press the brake pedal.
5
3
Share

How many cylinders does the Civic 1.0t have?

The Civic 1.0t is a three-cylinder engine. A three-cylinder engine consists of three cylinders, where three identical single cylinders are arranged within a single engine block sharing a common crankshaft to output power. The basic principle involves converting the chemical energy of gasoline (or diesel) into thermal energy, which then causes the combustion and expansion of the air-fuel mixture inside the sealed cylinders, thereby driving the pistons to perform work and converting thermal energy back into mechanical energy. The Civic 1.0t is a compact car launched by Dongfeng Honda Wuling, with dimensions of 4658mm in length, 1800mm in width, and 1416mm in height, and a wheelbase of 2700mm. It is equipped with a 1.0T turbocharged engine delivering a maximum power of 92kW, paired with a CVT continuously variable transmission.
2
2
Share

Can You Shift from D to S Gear While Driving an Automatic Transmission Car?

You can shift from D to S gear while driving an automatic transmission car. Key considerations include: 1. No need to press the brake pedal; 2. The accelerator pedal can be released or kept pressed; 3. Shifting from D to S gear requires pressing the gear lock button, while shifting back from S to D gear does not. The D gear (Drive) is a common position in automatic transmission vehicles, typically located toward the rear center of the gearshift console, behind the N (Neutral) position. Its purpose is to enable the car to automatically select appropriate gears during forward motion. The S gear (Sport mode) activates the car's sport driving mode, allowing the transmission to shift freely but delaying shift timing to keep the engine at higher RPMs for extended periods. This results in prolonged low-gear, high-RPM driving, delivering greater torque output and acceleration.
6
1
Share

What material is the transmission of the Pulsar made of?

The housing of the Pulsar's transmission is made of aluminum alloy, while the gears and bearings inside are made of steel. In the event of a vehicle fire, high temperatures can melt the transmission housing, but there are no combustible materials inside. The Pulsar is the abbreviated name for the ordinary Santana, equipped with a 6-speed Tiptronic automatic transmission, known for its wide application, stable quality, reliable technology, durability, smooth shifting, and high transmission efficiency, fully meeting the needs of daily driving. The Santana is a compact car launched by SAIC Volkswagen, with dimensions of 4475mm in length, 1706mm in width, and 1469mm in height, and a wheelbase of 2603mm. It is powered by a 1.5L naturally aspirated engine with a maximum power output of 82kw, paired with either a 5-speed manual or 6-speed automatic transmission.
3
0
Share

What is the standard tire pressure for a Cayenne?

The standard tire pressure for a Cayenne is 2.4-2.5 bar for normal standard tires. Below is some relevant information about the Cayenne: Interior Layout: The style remains distinctly Porsche, featuring a dual-tone interior with leather-wrapped door panels, seats, steering wheel, and gear lever, complemented by aluminum-white interior trim, a three-dial instrument cluster, independently adjustable front-seat climate control, and a multifunction steering wheel. Exterior: The Cayenne's headlights and grille retain Porsche's traditional design. The vehicle is 1940mm wide but only 1690mm tall, with a ground clearance of 273mm and a maximum approach angle of 32 degrees. The long-travel suspension springs enhance off-road performance, a unique feature of Porsche SUVs.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.