How to reset the tire pressure warning light?
1 Answers
Tire pressure monitoring light reset method: Turn on the ignition switch, press and hold the SET button of the tire inflation pressure control system. The tire monitoring button is located on the black button at the front panel of the gear shift lever until the instrument indicator light comes on. The tire pressure monitoring indicator is a yellow symbol, an irregular circle with no seal on top and four small spikes at the bottom, containing an exclamation mark inside. The illumination of the tire pressure monitoring indicator indicates abnormal tire pressure. Generally, there are three main reasons for abnormal tire pressure in the TACQUA: Abnormal tire pressure: Usually, an alarm will trigger if the pressure is below 1.8 bar or above 3.0 bar. At this time, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the tire pressure monitoring indicator to light up. In this case, simply perform a tire pressure reset. Damaged tire pressure sensor: The tire pressure sensor, used to monitor tire pressure, is directly installed inside the tire and connected to the tire inflation port. If the tire pressure sensor is damaged during driving, it will also cause the tire pressure fault light to illuminate. For sensor damage issues, only replacement with a new part is possible.
