How to Reset the Tire Pressure System?

1 Answers
LeBrody
07/29/25 6:29pm
Tire pressure system reset method: 1. Hold the reset button when the ignition switch is off; 2. Turn on the ignition switch; 3. Release the reset button and briefly press the clock adjustment button once; 4. The maintenance cycle display will be in reset mode, wait a few seconds to complete the reset. Tire pressure refers to the air pressure inside the tire. The tire pressure monitoring sensor is installed inside the tire or outside the valve stem. The tire pressure monitor is a simple tire pressure monitoring system that uses the ABS sensing function to compare the rotation counts of the tires. A tire with insufficient pressure will have a shorter circumference, and if one of the four tires has insufficient pressure, its rotation count will differ from the others during driving.
Was this review help?
16
1
Share
More Forum Discussions

What is the off-road mode of the Mercedes-Benz GLE?

The off-road mode of the Mercedes-Benz GLE includes: 1. Unlimited Power: It allows the vehicle to effortlessly escape from difficult situations, whether on city highways or in suburban areas. 2. Overcoming Challenges: It can mitigate the impact of extreme conditions and body distortion. Relevant information about the Mercedes-Benz GLE is as follows: 1. Exterior: The front features a large three-pointed star logo, paired with a three-dimensional double-bar grille design, and chrome trim on both sides. 2. Interior: It includes independently designed dual 12.3-inch full LCD instrument panel and central control LCD display. 3. Powertrain: The new model is equipped with a 3.0-liter twin-turbocharged inline six-cylinder engine, replacing the current V6 engine, delivering a maximum power of 435 horsepower (approximately 324 kW) and a maximum torque of 520 Nm.
10
2
Share

How to Deal with Installing Sirens on Private Cars?

Installing sirens without authorization is a serious violation of the law. According to Article 97 of the 'Road Traffic Safety Law of the People's Republic of China,' illegally installed sirens and warning lights will be forcibly removed and confiscated by the traffic management department of the public security organ, and a fine will be imposed without deducting points. If this leads to fraudulent activities or extortion, it will constitute a criminal offense. Auto accessory shops that illegally sell and install sirens can be penalized by the industrial and commercial department for operating beyond their permitted scope if discovered. Additional information: According to Article 16 of the 'Regulations on the Registration of Motor Vehicles' issued by the Ministry of Public Security: 1. Anti-collision devices: Small and mini passenger vehicles may install front and rear anti-collision devices; 2. Windshields, water tanks, toolboxes, spare tire racks: Cargo vehicles may install windshields, water tanks, toolboxes, spare tire racks, etc.; 3. Interior decorations: Additional interior decorations may be added to motor vehicles.
1
3
Share

How to deal with water entering the car through an open window without causing standing water?

When water enters the car through an open window without causing standing water, the treatment is as follows: remove the water inside the car, wipe dry the wet areas, then open the doors for ventilation. After the moisture has dried, test the electronic equipment in the car to ensure it functions properly. Precautions are as follows: 1. Moisture evaporation: Wet seats may develop mold. Avoid using a hot air blower to dry them. If the car has seat heating functions, use them to speed up moisture evaporation. After air-drying, use a leather polish cleaner. For sponge seats, you can remove the entire seat and air-dry the sponge inside. 2. Carpet cleaning: Do not soak the carpet completely in water for cleaning. On one hand, this can damage the bonding between different layers of the carpet material. On the other hand, it may prevent the carpet from drying thoroughly for a long time, affecting its use and causing dampness inside the car.
14
0
Share

What happens if you add 92 octane fuel to a car that requires 95 octane?

Short-term use or accidental mixing of different octane fuels has minimal impact and generally does not require special vehicle maintenance. However, if a car that normally uses 95 octane fuel is filled with 92 octane, it is recommended to use up the current fuel before refilling with 95 octane. Below are additional details: 1. Composition: 92 octane fuel contains 92% isooctane and 8% n-heptane, while 95 octane fuel contains 95% isooctane and 5% n-heptane. The higher the proportion of isooctane, the better the anti-knock performance. 2. Avoid prolonged mixing: Gasoline is a mixture, and while occasional mixing or accidental use poses no major issues, prolonged mixing should be avoided. To ensure vehicle safety and performance, it is best to clearly distinguish and use the correct octane rating. Otherwise, it can directly affect the engine, shorten the lifespan of spark plugs, and increase tailpipe emissions.
16
0
Share

What to Do When the Automatic Emergency Braking Function is Limited?

When the automatic emergency braking function is limited, it should be checked and repaired in time to avoid accidents. The following is an introduction to the knowledge of the automatic emergency braking function: 1. Introduction: The active brake assist system is mainly composed of three modules, including the control module, distance measurement module, and brake module. It uses radar, ultrasonic, camera and other equipment to detect the road ahead. After detecting a collision risk, the vehicle computer will automatically apply emergency braking. 2. Reasons for limitation: The functional range of the active brake assist system may also be limited due to heavy rain or snow causing functional impairment. The radar sensor system failure may be due to dirty sensors. If the front radar sensor system is dirty, the active blind spot assist system will attempt to correct the driving route with braking and will also sound a warning tone.
15
4
Share

What are the interior button instructions for the Raptor F150?

Raptor F150 interior function introduction: 1. Off-road mode: Reconfigures transmission settings and engine response time; 2. Two-wheel drive, four-wheel drive high, four-wheel drive low mode: Switches the Raptor's drive mode; 3. Electronic locking differential: Locks the rear driveshaft, ensuring equal power distribution to the rear wheels; 4. AdvanceTrac: Adjusts the engine's power and torque output configuration to enhance off-road mode performance. Below is an introduction to the Ford F-150: 1. Engine: The Ford F150 is a pickup truck under the Ford brand. The 2019 model is equipped with a 3.5-liter V6 twin-turbocharged engine, while older models feature a 6.2-liter naturally aspirated V8 engine. The 3.5-liter V6 twin-turbocharged engine in the Ford F150 has a maximum power output of 280 kW and a maximum torque of 672 Nm. The engine's peak power is achieved at 5,500 rpm, and peak torque is achieved at 3,000 rpm. 2. Suspension: The Ford F150 uses a double-wishbone independent suspension at the front and a solid axle non-independent suspension at the rear. 3. Suspension advantages: The double-wishbone suspension reduces body roll and minimizes brake dive, enhancing comfort on paved roads. The solid axle suspension improves off-road performance.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.