How to Reset the Tire Pressure on Volkswagen Lavida?

1 Answers
VonLukas
07/30/25 10:58am
Press and hold the black square "Tire Pressure Button" in front of the gear shift for 15 seconds. The function of the tire pressure monitoring system is to automatically monitor the tire pressure in real-time while driving, and to alert the driver in case of tire leaks or low pressure to ensure driving safety. If the tire pressure warning light comes on, it is necessary to immediately check and visit a repair shop to prevent dangers such as tire blowouts. Here are situations where tire pressure may change: 1. Excessive load on the wheels of a certain axle. 2. Driving with snow chains. 3. Driving with a spare wheel installed. 4. Replacement of a wheel on the front or rear axle. 5. Low tire pressure. 6. Structural damage to the tire. 7. Heavy vehicle load.
Was this review help?
9
5
Share
More Forum Discussions

What is Toyota Evans?

Evans is not an automobile brand, but a waterless antifreeze. Also known as waterless coolant, waterless cooling oil, or automotive cooling oil, it is a new type of automotive consumer product and a 'revolution' in automotive history. It completely eliminates the long-standing issues of corrosion, scale, cavitation, and overheating in the cooling system caused by traditional coolants, thereby extending the engine's lifespan. Below are the main benefits of waterless antifreeze: 1. Anti-corrosion: Prevents internal engine rust, keeping the radiator and cooling system as good as new; 2. No or minimal pressure: The cooling system operates under no or minimal pressure, allowing the radiator cap to be opened at any time; 3. Increased power: Eliminates the steam insulation layer, resolves local overheating of the engine, and releases engine power; 4. Faster acceleration: Shorter acceleration distance, smoother acceleration, and more seamless gear shifting; 5. Fuel savings: Provides an ideal working temperature environment for the engine, ensuring more complete and efficient combustion; 6. High boiling point, low freezing point: Resolves issues of ice expansion at low temperatures and overheating at high temperatures; 7. Thermal balance: Exceptional heat conductivity, with viscosity changing according to temperature, balancing the internal temperature of the engine; 8. Reduced emissions: Improved engine operation leads to more complete combustion, lower emissions, and reduced engine noise; 9. Less maintenance: Prevents corrosion inside the engine cooling system, reduces maintenance needs, and extends engine lifespan; 10. Slower cooling: Delays uneven engine heat dissipation.
11
1
Share

How to reset the maintenance light on a 2017 Haval H6?

17 Haval H6 maintenance light reset method: 1. Insert the key and keep the engine off; 2. Press the reset button once to display the system that needs to be reset, each press will switch to the next system; 3. Select the system that needs to be reset, and hold the reset button for about 3 seconds; 4. The multifunction display on the instrument panel shows the relevant icon, indicating the maintenance light has been successfully reset. The Haval H6 has a length, width, and height of 4640mm, 1825mm, and 1690mm respectively, with a wheelbase of 2738mm. The Haval H6 is positioned as a city SUV, and in terms of drive form, it has two modes: two-wheel drive and four-wheel drive. The H6 is built on a new platform different from the previous H3 and H5, characterized by the use of a unibody structure. The four-wheel-drive model of the H6 uses an on-demand four-wheel-drive system, unlike the body-on-frame structure and part-time four-wheel-drive system adopted by the H3 and H5. Although this may affect the H6's off-road performance to some extent, the advantage is that it can reduce body weight, improve fuel economy, and provide better ride comfort.
9
0
Share

How many points are deducted for reversing or driving against traffic on the highway?

Reversing or driving against traffic on the highway will result in a deduction of 12 points. Here are the relevant details: Follow lane discipline: When driving on the highway, vehicles must adhere to traffic regulations, with different vehicle types staying in their designated lanes. Except under special circumstances, avoid driving in lanes not assigned to your vehicle type for extended periods. Avoid unnecessary lane changes: Do not change lanes arbitrarily while driving on the highway. If overtaking is necessary, always signal in advance and only overtake in the adjacent lane. Do not perform consecutive overtakes, and return to your original lane promptly after overtaking, ensuring you do not cross lane markings.
16
0
Share

How long after drinking 330ml of beer can you drive?

Generally, a person weighing 70kg who drinks a 330ml can of beer will not be in a drunk driving state after 4 hours based on blood tests, but this also depends on the individual's actual weight and alcohol metabolism. Below is relevant information: Precautions: It is common knowledge that you should not drink before driving and must not drive under the influence of alcohol. Do not wear headphones while driving, as they can block external sounds and impair your judgment. Ensure your car is regularly maintained before driving and always check the vehicle's condition before hitting the road. Good habits: Before driving, it is advisable to walk around the car to inspect its exterior and check for any abnormalities in the tires. After getting into the car, first adjust the steering wheel position, then adjust the seat, and ensure a proper driving posture before starting the engine and shifting into gear to depart.
19
4
Share

Is Brake Pad Dust Good or Bad?

Generally speaking, the presence of black dust from brake pads is a normal phenomenon, as it indicates the regular wear and tear of the brake pads. Here are detailed information about brake pads: Types of brake pad materials: There are six types of brake pads, namely asbestos, semi-metallic, low-metallic, ceramic, ceramic formula, and high-carbon formula. Advantages and disadvantages of brake pad materials: Asbestos has good heat resistance but is considered a hazardous material harmful to health and has been replaced. Semi-metallic pads offer excellent heat dissipation but produce more noise, while low-metallic pads reduce noise and improve vehicle stability. Ceramic materials provide smooth and comfortable braking, excellent wear resistance, and produce no dust.
13
3
Share

What is the channel number for Volkswagen intake pressure?

There is no channel for Volkswagen intake pressure. It primarily relies on the engine speed signal sent by the crankshaft position sensor. When the engine speed reaches the set value, the engine control unit activates the solenoid valve circuit, opening the vacuum line and thereby opening the intake flap. The working principle is as follows: Intake valve opening: When air flows into the cylinder, due to inertia, even after the piston reaches the bottom dead center, air continues to flow into the cylinder. If the intake valve is closed when the cylinder pressure reaches its maximum, the volumetric efficiency will be maximized. This effect is known as the inertia effect. Cylinder pressure reaches maximum: To achieve the best volumetric efficiency, both the pulsation effect and the inertia effect must be considered. That is, when the cylinder pressure reaches its maximum and the intake valve is closed, the compression wave in the front intake manifold also reaches its highest position (peak).
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.