How to reset the tire pressure on the Trumpchi M6?

[Ivy]

Trumpchi M6 tire pressure reset method: First, turn on the ignition switch, press and hold the tire pressure monitoring reset button until you hear a "dong" sound, then release. The tire pressure monitoring system will store the current normal tire pressure data, automatically clear the previous data, and finally, the dashboard warning light will turn off, completing the tire pressure reset. The tire pressure monitoring indicator is a yellow symbol, an irregular circle with no stamp on top and four small spikes at the bottom, containing an exclamation mark inside. The tire pressure monitoring indicator light indicates abnormal tire pressure. Abnormal tire pressure generally has the following three causes: Tire pressure abnormality: Generally, it will trigger an alarm if the pressure is below 1.8 bar or above 3.0 bar. At this time, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure reset is not performed in time, the tire pressure monitoring system will still record the previous data, causing the tire pressure monitoring indicator light to turn on. In this case, simply perform a tire pressure reset. Tire pressure sensor damage: The tire pressure sensor is used to monitor tire pressure and is directly installed inside the tire, connected to the tire inflation port. If the tire pressure sensor is damaged during driving, it will also cause the tire pressure warning light to turn on. For sensor damage issues, only replacement with a new component is possible.