How to Reset the Tire Pressure on the New Cruze?

1 Answers
DiAdam
07/29/25 9:18pm
New Cruze tire pressure reset method: With the vehicle powered on, press the voice control button on the left side of the multifunction steering wheel; then press the confirm button on the left side of the multifunction steering wheel to successfully reset the tire pressure. The tire pressure monitoring system can automatically monitor various conditions of the tires in real time by recording the rotation speed of the tires or through electronic sensors installed in the tires, providing effective safety protection for driving. The New Cruze is a compact car under SAIC-GM Chevrolet, with dimensions of 4666 mm in length, 1807 mm in width, and 1460 mm in height, and a wheelbase of 2700 mm. In terms of power, the New Cruze is equipped with a naturally aspirated engine, delivering a maximum horsepower of 114 hp, a maximum torque of 146 Nm, and a maximum power of 84 kW.
Was this review help?
16
1
Share
More Forum Discussions

Is the Encore a four-wheel drive vehicle?

The Encore model does not come with four-wheel drive, but the performance version of this vehicle is equipped with four-wheel drive. Here are the specific details about the Encore performance version: 1. The performance version of the Encore adopts a front-engine, four-wheel drive layout with an on-demand four-wheel drive system. With the addition of the four-wheel drive system, the vehicle's power is significantly enhanced, but fuel consumption will increase. 2. Generally, SUV models use an on-demand four-wheel drive system. This vehicle employs a multi-plate clutch type central differential structure, which enables the locking function of the four-wheel drive system through the multi-plate clutch. 3. The on-demand four-wheel drive system in this vehicle only switches to four-wheel drive under appropriate conditions. Under normal driving conditions, the vehicle still uses two-wheel drive. The four-wheel drive system automatically switches between two-wheel drive and four-wheel drive modes based on the specific driving situation. No manual operation is required while driving.
10
4
Share

What suspension does the Great Wall C30 New Energy use?

The Great Wall C30 New Energy uses a MacPherson independent suspension for the front suspension and a torsion beam non-independent suspension for the rear suspension. Many compact cars and small cars use torsion beam suspensions, not only to reduce costs but also because these cars do not have enough space at the rear to install a multi-link independent suspension. Using a torsion beam suspension can also expand the rear seating space and trunk space. The MacPherson suspension is a widely used suspension system, with a relatively simple structure consisting of only an L-shaped control arm, and this suspension hardly occupies any engine compartment space.
13
1
Share

Do All Turbocharged Engines Have Oil Burning Issues?

Models equipped with turbochargers generally do not experience oil burning issues. When oil burning occurs, it is usually due to improper maintenance of the turbocharger. Therefore, for turbocharged models, the following usage recommendations should be noted: 1. Use synthetic lubricating oil and regularly replace and clean the air filter. 2. After high-speed operation, do not immediately turn off the engine. Sudden shutdown interrupts oil lubrication, and the heat inside the turbocharger cannot be dissipated by the oil, which can easily cause the turbocharger's rotating shaft and bushing to "seize." 3. After the engine is suddenly turned off, the flow of oil to the turbocharger stops. If the exhaust pipe temperature is still high at this time, the heat will be absorbed by the turbocharger housing, causing the remaining oil inside the turbocharger to carbonize and form deposits. 4. As deposits accumulate, they can block the oil inlet, leading to insufficient lubrication of the bushing. This accelerates wear between the turbo shaft and bushing, and in severe cases, may even cause "seizure."
10
5
Share

Where is the OBD interface located on the Changan Star?

The OBD interface of the Changan Star is located next to the battery in the engine compartment, and it can be seen by opening the engine hood. The full name of OBD is On-Board Diagnostics, which refers to the on-board automatic diagnostic system. This system can perform automatic diagnosis of the vehicle's condition. If any issues are detected, they will be stored in the memory in the form of fault codes and can be read out using specialized equipment, facilitating mechanics' judgment of vehicle faults and enabling them to quickly address the problems. The Changan Star has body dimensions of 3980mm in length, 1620mm in width, and 1890mm in height. In terms of power, the Changan Star is equipped with a 1.2-liter naturally aspirated engine across all models, delivering a maximum horsepower of 98 hp, a maximum power of 72 kW, and a maximum torque of 119 Nm.
20
2
Share

How to Solve Parking Brake Failure?

You need to go to a 4S shop and use a computer diagnostic tool for detection. After repairing according to the fault code, reset the fault light. Here is some relevant information: 1. There are three forms of parking brake: electronic handbrake, parking foot brake, and mechanical handbrake. Among them, the parking foot brake and mechanical handbrake both use mechanical mechanisms to achieve parking braking, while the electronic handbrake uses an electric motor to pull the steel cable to lock the wheels. Compared with the electronic handbrake, the traditional mechanical handbrake has higher stability and reliability, and its failure rate is much lower than that of the electronic handbrake. 2. The brake warning light usually comes on due to the following reasons: the parking brake lever is not released, lack of brake fluid, or switch damage. Brake fluid (hydraulic brake fluid) is the liquid medium that transmits braking pressure in the hydraulic braking system, used in vehicles with hydraulic braking systems.
13
1
Share

Where is the engine number of the Great Wall Voleex?

The engine number of the Great Wall Voleex is located at the rear right of the engine, where it connects to the transmission. You will need to remove the air filter box to see it. In terms of body dimensions, the Great Wall Voleex measures 3950mm in length, 1717mm in width, and 1542mm in height, with a wheelbase of 2368mm. Regarding power, the Great Wall Voleex comes with two engine options. The first is a 1.3-liter inline 4-cylinder naturally aspirated engine, paired with either a 5-speed manual or a 5-speed manual-automatic transmission, delivering a maximum power of 68KW and a maximum torque of 118NM. The second option is a 1.5-liter inline 4-cylinder naturally aspirated engine, also paired with either a 5-speed manual or a 5-speed manual-automatic transmission, producing a maximum power of 78KW and a maximum torque of 138NM.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.