How to reset the tire pressure on Roewe 360?

[ArianaAnn]

Roewe 360 tire pressure reset method: There is a tire pressure reset button near the gear shift lever. Press and hold this button to turn off the tire pressure warning light. Many vehicles are equipped with a tire pressure monitoring system, which uses wheel speed sensors to detect the rotation speed of each wheel. When the speed difference between one wheel and the other three wheels reaches a certain value, the tire pressure warning light on the dashboard will illuminate, indicating that the system has detected abnormal tire pressure in one of the tires. This type of tire pressure monitoring system is relatively low-cost and cannot display real-time tire pressure data. In some high-end vehicles, there are tire pressure sensors inside the wheel rims, allowing real-time tire pressure data to be displayed on the central control screen. This type of tire pressure monitoring system provides more accurate data. Tires are the only components of a vehicle that come into contact with the ground, and they are crucial for driving safety and stability. Tire pressure should neither be too high nor too low.

[DelGenesis]

When I was driving the Roewe 360, I also encountered the issue of the tire pressure warning light constantly staying on, which was really annoying. Later, I asked a few experienced driver friends and learned that I needed to ensure the tire pressure was normal before resetting it. The specific steps are: find a safe place to park, check the pressure of each tire using a tire pressure gauge, and inflate them if the pressure is below 2.5 bar. Then, start the car, press the menu button on the left side of the steering wheel, navigate to the settings option on the dashboard screen, find 'Tire Pressure Calibration' or a similar option, and confirm the reset. After resetting, the light went off, and I made sure to check the tire pressure before every drive to avoid the issue recurring. If the light stays on after resetting, it might indicate a faulty sensor, and you should take the car to a 4S shop for inspection. Now, when I told my wife about this, she got smart and learned the reset method herself. In short, incorrect tire pressure can easily lead to a blowout, so safety is paramount—don’t be lazy. If the light stays on despite normal pressure, consider other factors like sensor contamination, and I make sure to clean it promptly to avoid potential hazards.

[NorahFitz]

I've been repairing cars for over a decade and frequently handle the tire pressure warning reset for the Roewe 360. Generally, the tire pressure light comes on either due to insufficient air pressure or sensor issues. Here's the simple procedure: First, park your car and use a standard tire pressure gauge to check all tires, ensuring they're within the 2.2-2.5 bar range. If the pressure is too low, inflate them. To reset, get in the car, start the ignition, locate the small menu button on the steering wheel, navigate to the instrument settings, and select the tire pressure reset. Most vehicles support this operation. However, if the light comes back on after resetting, the sensor might be dirty or out of battery, requiring a professional tool to scan for fault codes. A quick tip: After resetting, avoid immediately driving on highways; test it on city roads first to check for any abnormalities. During regular maintenance, it's advisable to clean the tire sensor areas frequently to prevent dirt buildup. Many repair shops use this method—it's cost-effective and efficient, and I've helped numerous customers with it. If you can't manage it yourself, don't delay; seek professional help to avoid risks. After all, abnormal tire pressure is a potential cause of blowouts, and driving safety should always come first.

[ElijahMarie]

When the tire pressure warning light comes on, it must be addressed promptly because low pressure increases the risk of a blowout. The reset operation for the Roewe 360 is straightforward: First, after parking the car, check if the tire pressure meets the standard. Second, start the engine, use the steering wheel buttons to navigate to the menu, find the tire pressure settings, and confirm the reset. Once done, the light will turn off. I often check the tire pressure before driving to ensure it's within the recommended range. Remember, resetting is only a temporary solution and doesn't fix the root problem. If the pressure is normal but the reset doesn't work, check if the sensor is faulty and visit a professional repair shop if necessary. Safety is no small matter—don't delay addressing it. Regularly cleaning the sensor area during car washes can help prevent malfunctions. After resetting, test-drive a short distance to observe the light's status and ensure no recurring issues. These steps are simple and easy to follow, even for beginners.