How to reset the tire pressure on MG MG6?

[LeEsther]

The method to reset the tire pressure on MG MG6 is as follows: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "dong" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, indicating the completion of the tire pressure reset. Tire pressure monitoring is an automatic real-time monitoring of tire pressure during vehicle operation, which alerts the driver to tire leaks or low pressure to ensure driving safety. There are three commonly used methods for tire pressure monitoring: Direct tire pressure monitoring: This system uses pressure sensors installed in each tire to directly measure the tire pressure. The pressure information is transmitted from inside the tire to a central receiver module via a wireless transmitter, and the data for each tire's pressure is displayed. The system automatically alerts when the tire pressure is too low or there is a leak. Indirect tire pressure monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that tire to become smaller, resulting in a faster rotation speed compared to the other wheels. By comparing the differences in rotation speeds between tires, the system monitors tire pressure. Indirect tire pressure alert systems essentially rely on calculating the rolling radius of tires to monitor pressure. Introduction to Tire Pressure Monitoring System (TPMS): This system combines the advantages of both direct and indirect systems. It equips direct sensors in two diagonally opposite tires and includes a four-wheel indirect system. Compared to using only a direct system, this hybrid system can reduce costs and overcome the limitation of indirect systems that cannot detect simultaneous low pressure in multiple tires. However, it still cannot provide real-time data on the actual pressure in all four tires like a direct system can.

[WalkerLynn]

Last time I refilled the tire pressure on my MG6, resetting it was super easy. Start the car and shift to P gear, then open the infotainment screen to find the vehicle settings menu. There's a tire pressure monitoring option inside. Click in and you'll see the tire pressure reset button—hold it for 3 seconds until the TPMS light on the dashboard starts blinking. Then drive steadily for about 15 minutes to let the sensors relearn the data. The key is adjusting tire pressure to the standard value when the tires are cold—the exact numbers are on the label stuck to the door pillar. I recommend checking tire pressure every season change; the ideal values actually differ between summer and winter. After resetting, it's best to drive on flat roads for a while to ensure system stability. Next time the tire pressure warning comes on, it'll mean there's a real issue.

[StMalachi]

As a seasoned driver with three years of experience driving the MG6, I'm very familiar with the tire pressure reset procedure. First, ensure all four tires are inflated to the standard value of 2.3 bar, then start the vehicle without moving it. Use the toggle button on the right side of the steering wheel to access the trip computer menu, navigate to the tire pressure system interface where you'll find the reset option. Remember to perform this operation while in P (Park) mode. After pressing the confirmation button, the dashboard indicator light will turn off. Then drive in a straight line for at least 15 minutes, maintaining a speed between 40-60 km/h for optimal results. Don't rush onto highways immediately as the sensors need time to collect new data. I always keep a portable air pump in my car - when tire pressure is abnormal, I inflate the tires myself before resetting, which saves trips to the repair shop.

[VanZoe]

When I first got my MG6, I researched the tire pressure reset procedure. Press the MODE button on the left side of the steering wheel control area to enter the system settings, then select the tire pressure calibration to display the reset option. Drive at a steady speed for about ten minutes when the progress prompt appears on the center console. The key is to ensure consistent tire pressure before resetting—I prefer using a mechanical gauge as it's more accurate than digital displays. During seasons with significant temperature changes, recheck the tire pressure the next day after resetting, as it might drift by 0.1 bar. Remember to regularly check the spare tire pressure; even though it doesn’t have a sensor, a flat spare can be troublesome.