How to reset the tire pressure on Geely Borui?

[RhettMarie]

Geely Borui does not have a shortcut key. You can only enter the menu through the steering wheel, find the tire pressure monitoring, enter it, and then select reset. Tire pressure, strictly speaking, refers to the pressure of the air inside the tire. Nowadays, many tires are not filled with air. For these tires, the tire pressure requirements are relatively strict. As for tires filled with air, the pressure is related to seasonal changes. Moreover, tire pressure is closely related to the performance of the car, such as comfort and load capacity, and it also affects the lifespan of the tire. More details are as follows: 1. Air pressure is the lifeblood of the tire. Both too high and too low pressure will shorten the service life of the tire. Too low pressure will increase the deformation of the tire body, easily causing cracks on the sidewall, and generating bending movement, leading to excessive heat, promoting rubber aging, fatigue of the cord layer, and breakage of the cords. It will also increase the tire's contact area with the ground, accelerating wear on the tire shoulder. 2. Too high pressure will cause excessive stretching deformation of the tire cords, reducing the elasticity of the tire body, increasing the load on the car during driving. If impacted, it may cause internal cracks and explosions. At the same time, too high pressure will also accelerate wear on the tire crown and reduce its resistance to rolling.

[OMalachi]

I recently helped a friend deal with the tire pressure warning issue on a Geely Borui. The reset method is actually quite straightforward. First, adjust the air pressure of all four tires to the standard value, usually around 230 kPa, and confirm it accurately with a tire pressure gauge; otherwise, the warning will reappear after resetting. Start the engine without moving the vehicle, use the control buttons on the right side of the steering wheel to enter the vehicle settings menu on the dashboard, scroll down to find the tire pressure system option, and press the confirm button to execute the reset or initialization when you see it. The system will automatically re-monitor the tire pressure, and the warning light will turn off. Pay attention to road conditions while driving, as bumpy roads or hot weather can affect tire pressure readings. Regular checks after resetting can prevent false alarms and ensure driving safety.

[Manuel]

Tire pressure reset is crucial for vehicle stability. The specific steps I learned while servicing the Geely Borui are as follows: After inflating the tires to the correct pressure, sit in the driver's seat and start the ignition without pressing the accelerator. Locate the settings entry on the central control screen, navigate to the vehicle information or maintenance-related options, then click the reset function under the tire pressure monitoring system option. After confirming the operation, wait a few seconds for the system to update the data. I recommend performing this operation in a garage or on level ground to avoid distractions while driving. If the light remains on after reset, it may indicate a sensor issue or inconsistent pressure, requiring further diagnosis.

[OGenevieve]

Resetting the tire pressure is not difficult. I do it every time I service my car. First, ensure the tire pressure is correct, then start the engine and look for the tire pressure reset button on the dashboard or center console screen to initiate the process. After completion, remember to drive a short distance to allow the system to recalibrate the data.

[Leo]

From a safety perspective, tire pressure reset is crucial. After adjusting the tires on the Geely Borui, a reset is required to avoid false alarms. I've experienced the steps: after adjusting the pressure, start the car, enter the settings menu to select the tire pressure reset, and confirm to complete. Regular resets can prevent distracting alarms while driving.