How to reset the tire pressure on FAW-Volkswagen Magotan?

1 Answers
Emanuel
07/30/25 1:07am
FAW-Volkswagen Magotan tire pressure reset method: 1. Select RPA in the menu settings and confirm; 2. Select settings and confirm; 3. Enter the idriver interface and select vehicle settings; 4. Tire pressure initialization, which is RPA, and then confirm. The length, width, and height of the FAW-Volkswagen Magotan are 4866mm, 1832mm, and 1464mm respectively, with a wheelbase of 2812mm. The FAW-Volkswagen Magotan adopts a MacPherson independent front suspension and a compact four-link independent rear suspension structure, giving the Magotan a strong sense of sportiness, clear and solid road feel, while ensuring a strong sense of sportiness, it also takes comfort into account.
Was this review help?
2
2
Share
More Forum Discussions

What is the fuel tank capacity in liters for the Volkswagen Polo 1.4?

The fuel tank capacity of the Volkswagen Polo 1.4 is 45L, which is the officially published data. The Volkswagen Polo 1.4 uses 92-octane gasoline, with a fuel consumption of 5.8-6.2L per 100 kilometers. A full tank can cover a distance of 726 to 776km. During daily driving, it is necessary to always pay attention to the remaining fuel in the tank. This is usually observed through the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are about 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity marked by the car manufacturer is measured from the bottom of the tank to the safe limit, and there is still some space from the safe limit to the tank opening. This space is reserved to allow the fuel to expand when the temperature rises without overflowing the tank. If fuel is added up to the tank opening during refueling, the actual refueling amount may exceed the marked tank capacity.
3
0
Share

What Driver's License is Required for a Mercedes-Benz Yellow License Plate?

Mercedes-Benz yellow license plate requires a B1 or B2 driver's license. B1 Driver's License: The B1 license allows driving medium-sized passenger vehicles, defined as those not exceeding 6 meters in length, with a rated passenger capacity of 10 (inclusive) to 19 (inclusive) persons. Other vehicle types permitted include C1 (small cars), C2 (small automatic transmission cars), C3 (low-speed trucks), C4 (three-wheeled vehicles), and M (wheeled self-propelled machinery). It's important to note that the B1 license does not cover B2 vehicles. If a B1 license holder wishes to drive large trucks, they can upgrade their license to a B1B2 (or A1, A2, A1A2, etc.). B2 Driver's License: The B2 license permits driving heavy and medium-duty trucks or large, heavy, and medium-sized specialized operation vehicles. Heavy and medium-duty trucks are primarily trucks, such as the large dump trucks commonly seen on roads carrying construction debris. Large, heavy, and medium-sized specialized operation vehicles refer to vehicles equipped with special devices or equipment, such as water sprinklers, concrete mixers, fire trucks, etc.
14
2
Share

Do I Need to Drive the Car to Replace a Temporary License Plate?

Applying for a temporary vehicle license plate does not require an on-site inspection of the vehicle. As long as you meet the regulations and bring all the required materials, you can apply for it without driving the car there. Otherwise, it will be treated as a violation for not displaying the vehicle license plate. Materials required for obtaining a temporary vehicle license plate: (1) Original and photocopy of the identity proof of the vehicle owner; (2) If handled by an agent, the original and photocopy of the agent's identity proof must also be submitted (if the agent is a company, the original and photocopy of the handler's identity proof must also be submitted), along with a written authorization from the vehicle owner; (3) Proof of compulsory traffic accident liability insurance for the vehicle; (4) For unsold vehicles or special vehicles that exceed national standards in terms of axle load, total mass, or external dimensions, the vehicle's factory qualification certificate or import certificate must also be submitted; (5) For vehicles obtained through purchase, allocation, or gift that have not yet been registered, proof of the vehicle's origin, the vehicle's factory qualification certificate, or import certificate must also be submitted; (6) For vehicles used for research or prototype testing, a written application from the research or testing unit and the vehicle's safety technical inspection certificate must also be submitted.
19
5
Share

What are the reasons for the horn not working on a Mercedes-Benz GLK300?

Here are the specific reasons why the horn may not work on a Mercedes-Benz GLK300: Poor contact at the electromagnetic coil terminal: Some horns have internal electromagnetic coil enameled wire terminal connections made with aluminum metal rivets instead of secure welded connections. If the insulation paint on the wire ends is not properly removed or the rivet connection is not secure, it can easily lead to a poor connection, causing the horn to malfunction. This type of fault is due to the horn's quality and cannot be repaired; only a replacement will solve the issue. Contact point erosion: Prolonged use of the horn can cause the contact points to erode, creating impedance. This reduces the current flowing through the electromagnetic coil, weakening the electromagnetic force and preventing it from attracting the armature to drive the diaphragm for normal vibration, resulting in a hoarse sound or no sound at all. However, if the horn is pressed continuously, a momentary strong current passing through the impedance may still allow it to work temporarily. Moisture due to poor sealing: Although the horn is internally sealed, if the sealing is not tight, moisture or water vapor can enter during car washing or from the surrounding air. This moisture can cause the contact points to become damp, leading to malfunction.
12
1
Share

Where is the Cruise Control on Volkswagen Tayron

Instructions for using the cruise control buttons on Volkswagen Tayron: ①CNL is used to cancel cruise control, RES is used to resume cruise control, and 0/1 is used to turn off cruise control. ②Before activating cruise control, the cruising speed should be set via the SET button. (Note: Cruise control cannot be used when the speed is too low. The speed should be higher than 30km/h when in use.) ③The silver button on the left side of the steering wheel is used to control the cruise control speed. Moving it left or right can adjust the speed. ④Using the cruise/speed limit toggle button, an upper speed limit can be set (no matter how hard the driver presses the accelerator, the speed will not exceed the set limit). Precautions for using cruise control on Volkswagen Tayron ①Cruise control still requires the driver to brake manually, while adaptive cruise control can achieve automation. Friendly reminder: Drivers should always stay alert and aware of their surroundings. ②Cruise control will be deactivated as soon as the brake is pressed. The set speed value will still be retained and can be manually resumed. ③In severe weather conditions like blizzards or on dangerous roads, please turn off cruise control and drive manually with caution. ④When driving downhill, the vehicle may exceed the set speed. In such cases, press the brake or turn off cruise control.
13
4
Share

What are the exterior dimensions of the new Trumpchi GS8?

The dimensions of the Trumpchi GS8 are 4810mm in length, 1910mm in width, and 1770mm in height, with a wheelbase of 2800mm. In terms of exterior design: On the front grille and bumper, you can see front radar, a front camera, and the radar probe for ACC adaptive cruise control, indicating that the GS8 is quite well-equipped. The full LED headlights of the GS8 are designed in harmony with the front face, with the C-shaped LED daytime running lights cleverly connecting to the air intake grille. The fog lights consist of five LED bulbs, surrounded by matte chrome trim. The exterior rearview mirrors are very large, integrating turn signals and cameras for observing the sides of the vehicle, along with electric folding and heating functions. The rear design of the GS8 is much simpler compared to the front, presenting a visually robust and full appearance. In terms of powertrain: The Trumpchi GS8 is equipped with a 2.0T turbocharged engine across the lineup, featuring low-inertia E-Turbo boosting technology, GCCS combustion control technology, and DCVVT dual continuous variable valve timing technology. It delivers a maximum power of 147 kW and a peak torque of 320 Nm. The transmission is a 6-speed automatic gearbox from Aisin, equipped with paddle shifters. With ample power reserves and mature matching, the GS8 offers a very comfortable daily driving experience.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.