How to reset the tire pressure on a Volvo XC60?

2 Answers
VonNova
07/29/25 3:23am
Volvo XC60 tire pressure reset steps: Turn on the ignition, press and hold the tire pressure monitoring reset button until you hear a "ding" sound, then release. At this point, the tire pressure monitoring system will store the current normal tire pressure data, automatically clear the previous data, and finally the dashboard warning light will turn off. What to do if the tire pressure is insufficient: If no damage is visible on the car's tires, simply inflate them to the normal pressure and reset the tire pressure system. If inspection reveals that a tire has been punctured, drive to a car repair shop promptly to have it patched, then reinflate it. If the tire pressure warning appears again some time after inflation but there is no puncture, it may be due to air leakage caused by a deformed wheel rim. It is recommended to check the wheel rim and replace it if necessary. The working principle of the tire pressure monitoring system is: It uses pressure sensors installed inside the tires to measure the tire pressure and wireless transmitters to send the pressure information from inside the tire to a central receiver module.
Was this review help?
11
5
Share
SanHolden
08/12/25 7:14am
I've been driving my Volvo XC60 for several years, and resetting the tire pressure warning is actually quite straightforward. After starting the car, first settle into the driver's seat and use the buttons on the left side of the steering wheel to navigate the dashboard menu. Switch to the 'Car Settings' option, where you'll find a 'Tire Pressure Monitoring' submenu—click into it to see the reset button. Make sure the actual pressure in all four tires is normal by checking with a tire pressure gauge; if it's too low or too high, you'll need to inflate or deflate them. After that, drive a few kilometers, and the system will automatically calibrate, turning off the warning light. Don’t forget to check tire pressure regularly, as high summer temperatures can cause fluctuations, and a persistent warning light increases driving risks. If the light stays on after several attempts, it might be a sensor issue—best to visit a dealership for inspection to prevent any mishaps. I think it’s a good habit to check tire pressure quarterly; it saves a lot of hassle.
Was this review help?
5
2
Share
Expand All
More Forum Discussions

How many kilometers can a sedan drive after the fuel gauge light comes on?

A sedan can typically drive 40 to 60 kilometers after the fuel gauge light comes on. When the fuel light illuminates, you should refuel as soon as possible to avoid the embarrassment of your car stalling due to running out of fuel on the road. Waiting until the fuel light comes on before refueling may cause damage to the fuel pump and filter. When driving normally, do not wait until the fuel gauge shows a yellow warning light to refuel. As soon as you see the fuel gauge nearing empty, you should refuel immediately. The less gasoline there is, the greater the harm to the car. The fuel pump is cooled by gasoline, and insufficient gasoline can affect the cooling effect of the fuel pump. Over time, the fuel pump is likely to be damaged, and with insufficient gasoline, the working noise of the fuel pump will also increase.
8
5
Share

Where is the fuse box of Lexus UX?

The fuse box of Lexus UX is generally located on the left side of the steering wheel or inside the glove box. For specific details, please refer to the car manual. Typically, there are two fuse boxes in a vehicle. One is located inside the engine compartment, responsible for the normal operation of external electrical components such as headlights, horn, onboard computer, air conditioning compressor, and windshield washer motor. The other is located on the left side of the steering wheel or inside the glove box, responsible for the normal operation of internal electrical components such as power windows, cigarette lighter, power seats, and airbags. Below is a brief introduction to the Lexus UX: 1. The Lexus UX is built on the Toyota TNGA-C platform, featuring sharp lines and contours that exude a strong sense of power, continuing the brand's consistent youthful and aggressive style. In recent years, Lexus designs have become highly distinctive and bold, and the UX is no exception. Its family design language gives it a sharp and striking appearance, specifically tailored for young consumers. 2. In terms of power, the new UX200 model is equipped with a 2.0L naturally aspirated engine paired with a DirectShift-CVT transmission, delivering a maximum power of 127kW (173PS) and a maximum torque of 207N·m. The new UX260h model features a hybrid system, matched with an electronic continuously variable transmission system (ECVT), with a combined power output of 135kW (184PS). The new UX260h F SPORT all-wheel-drive version comes with an all-wheel-drive system and AVS suspension.
8
1
Share

What is the appropriate tire pressure for a Ford Edge?

Ford Edge tire pressure is generally suitable at 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. How to check tire pressure in a Ford Edge: First, enter the main menu of the driving computer, select "Driver Assist," then click into "Tire Pressure Monitoring" to view. The Edge is equipped with a tire pressure monitoring system. When it detects one or more tires significantly underinflated, a warning light will illuminate. If the low tire pressure warning light comes on, you should stop and check the tires as soon as possible and inflate them to the correct pressure. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no seal on top, four small spikes below, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure. Typically, it will alert if the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are needed. Tire pressure monitoring not reset. After inflating the tires, if the tire pressure is not reset promptly, the system will still record the previous data, causing the tire pressure monitoring light to illuminate. Simply perform a tire pressure reset to resolve this. Damaged tire pressure sensor. The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged during driving (e.g., by hitting a curb), it can also trigger the tire pressure warning light. For sensor damage, the only solution is to replace it with a new part.
13
4
Share

What Type of Gasoline Should a Motorcycle Use?

Generally, regular motorcycles use 92-octane gasoline. Below are some precautions for motorcycle riding: 1. Break-in period: During the break-in period, the engine speed should not exceed 50% of the maximum power speed, and the maximum speed should not exceed 75%. 2. Post break-in period: The maximum riding speed should not exceed 75% of the maximum power speed, as exceeding this limit may cause unnecessary malfunctions in the motorcycle. 3. Gear usage: Taking a common 125CC motorcycle as an example. First gear is only used for low-speed starts or climbing very steep slopes. Immediately after starting, shift into second gear. Second gear is generally suitable for speeds between 10-20, third gear for speeds between 20-40, fourth gear for speeds between 30-50, and fifth gear is typically used for speeds above 40.
17
3
Share

Why is the speed limit on the Hedong-Dalian Expressway set at 80 kilometers per hour?

The speed limit on the Hedong-Dalian Expressway is set at 80 kilometers per hour only in certain sections, primarily due to technical conditions affecting interchange areas and tunnel sections. The design speed of the Hedong-Dalian Expressway is 100 kilometers per hour, with speed limits of 80 kilometers per hour in areas such as the curved section of the Dongjiagou Interchange and the Jinshan Tunnel. Relevant information about the speed limit is as follows: 1. Introduction to speed limits: Speed limits generally refer to the regulation of vehicle speeds within a certain numerical range over a specified distance of road. 2. Purpose of speed limits: The main purpose is to pre-warn drivers to reasonably control their speed in subsequent sections ahead, prevent the dangers of speeding, and ensure driving safety. Speed limits are an indispensable and most important aspect of road transportation safety.
14
1
Share

Does the 2007 Ford Focus ignition coil have a fuse?

The 2007 Ford Focus ignition coil has a fuse. The core components of the ignition system are the ignition coil and the switching device. By increasing the energy of the ignition coil, the spark plug can generate sparks with sufficient energy, which is the basic condition for the ignition system to adapt to the operation of modern engines. Steps for removing and installing the ignition coil: 1. Open the ignition coil cover on top of the engine and use a five-pointed wrench to remove the ignition coil fixing screws; 2. Remove the ignition coil power plug, gently pry it up with a screwdriver, and then remove the ignition coil; 3. Install the new ignition coil and tighten the screws, then reconnect the power plug and cover the top panel. The body dimensions of the 2007 Ford Focus are 4480mm in length, 1840mm in width, 1500mm in height, and the wheelbase is 2640mm.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.