How to reset the tire pressure on a Haval H6?
4 Answers
Haval H6 tire pressure reset method: Disconnect the negative terminal of the battery for more than one minute and then reconnect it. At this time, the trip odometer will reset to zero, and the tire pressure for all four wheels will not display numbers but only a horizontal line. The yellow warning light on the left speedometer will stop flashing. Then, drive approximately one kilometer, and the tire pressure values for all four wheels will be displayed and return to their previous normal state. The Haval H6 is a flagship model under the Haval brand. The dimensions of this car are 4640mm in length, 1825mm in width, and 1690mm in height, with a wheelbase of 2680mm. The Haval H6 is equipped with two engines: a 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine. These engines are paired with either a 6-speed manual transmission or a 7-speed dual-clutch transmission.
Last time the tire pressure warning light came on in my Haval H6, I managed to reset it myself. The specific steps were: first check if the tire pressure in all four tires was normal—using a pressure gauge confirmed they were all up to standard. Then, sit in the car without starting the engine, just turn on the ignition. Navigate to the settings menu on the central display, scroll to the vehicle information or maintenance section, and enter the tire pressure monitoring system. There’s a reset option inside; after selecting and confirming, the system will prompt you to drive for a few minutes to let the sensors sync. I drove for five minutes, and the light went off. The whole process only takes a few minutes and is quite straightforward. However, if there’s insufficient air or a leak in the tire, the reset might fail, and you’ll need to top up the air promptly. Remember to check the tire pressure regularly after resetting, as weather changes—like colder temperatures in winter—can cause tire pressure to drop, affecting driving safety and increasing fuel consumption. I make it a habit to check the pressure monthly to prevent unexpected blowouts.
As a car enthusiast, let me talk about the tire pressure reset method for the Haval H6. The Tire Pressure Monitoring System (TPMS) relies on sensors to detect abnormal pressure, and resetting it means calibrating it back to normal values. When operating, ensure all tires are evenly inflated, then enter the vehicle and turn on the ignition without starting the engine. Find the vehicle settings in the central control navigation screen, select the tire pressure calibration option, and press the reset button. Then drive at a steady speed for a few minutes to complete the setup. If the light remains on after resetting, the sensor might be dirty or the battery might be low, requiring cleaning or replacement. Don’t reset too frequently; it’s generally recommended to do it after adjusting the tires or during seasonal changes. Maintaining proper tire pressure not only extends tire life but also saves fuel. I recommend buying a good-quality tire pressure gauge to keep on hand.
Incorrect tire pressure calibration may lead to annoying alarms that distract driving. Resetting the Haval H6 is simple. My routine is to confirm the tire pressure is normal, then open the car door, turn the ignition to the ACC position, locate the tire pressure option on the central console, press the reset button, and drive a short distance for it to complete automatically. Regular resetting is crucial because sensor malfunctions can trigger false alarms, causing faster tire wear or increased fuel consumption. For safety, don't delay too long—act immediately when the light comes on. The reset interval should not exceed six months.
