How to reset the tire pressure on a 2017 Envision?

1 Answers
VanJasmine
07/24/25 2:58pm
The method to reset the Envision's tire pressure warning light is as follows: 1. First, inflate the tires to the normal pressure range; 2. Then start the vehicle; 3. There is a MENU button on the headlight control switch, click MENU to enter the menu; 4. Select the "Vehicle Information Menu," use the option buttons on the steering wheel to bring up the "Tire Pressure" option in the vehicle's computer; 5. Press the SET button at the end, and confirm according to the prompts to reset the tire pressure; 6. Finally, hold down the "√" button on the right side of the steering wheel for a few seconds to complete the reset.
Was this review help?
17
4
Share
More Forum Discussions

Does not signing out during study hours count?

If you don't sign out during the study hours for the driver's license exam, those hours won't be counted. Here's a detailed introduction about it: 1. Definition of a motor vehicle driver's license: It is a legal document issued by the administrative authorities, permitting individuals who have legally learned to drive motor vehicles and have mastered traffic regulations and driving skills after passing the required exams to drive certain types of motor vehicles. 2. Subjects of the motor vehicle driver's license exam: Include traffic regulations and related knowledge, field driving, and road driving (including safe and civilized driving). 3. The exam content mainly includes the requirements for safe and civilized driving operations, knowledge of safe driving under adverse weather and complex road conditions, emergency handling methods in situations like tire blowouts, and knowledge of post-accident procedures.
6
0
Share

Should You Buy a 2WD or 4WD SUV?

Clearly understand your actual needs and make the purchase accordingly. Two-Wheel Drive (2WD): It refers to the engine driving either the two front wheels or the two rear wheels through components like the transmission, allowing the vehicle to move forward or backward. Currently, most 2WD off-road vehicles use front-engine rear-wheel drive (FR), while 2WD urban SUVs typically employ front-engine front-wheel drive (FF). Four-Wheel Drive (4WD): This means both the front and rear wheels of the vehicle have driving power. If you see a vehicle marked with 4X4 or 4WD, it indicates the vehicle has four-wheel drive capability. Four-wheel drive is divided into three types: full-time 4WD, part-time 4WD, and on-demand 4WD.
11
0
Share

Does a car that has just reached six years need to pass the inspection line for annual inspection?

A car that has just reached six years needs to undergo on-site inspection for its annual inspection. Only vehicles within 6 years enjoy the exemption from on-site inspection. Here are the relevant details: 1. Two exemption opportunities: If you buy a new car and it is still within 6 years, you can be exempted from inspection twice (you need to apply for the inspection mark every two years, but the vehicle does not need to be inspected on-site); in the 6th and 8th years, the vehicle must undergo on-site inspection. 2. Private cars over 10 years old: For private cars over 10 years old, the original inspection cycle still applies, that is, annual inspection for cars between 10 and 15 years old, and semi-annual inspection for cars over 15 years old.
13
5
Share

Reference Points for Straight-Line Driving?

Here are the tips for straight-line driving: 1. Look far ahead: The farther you look, the straighter you drive. Look as far ahead as possible. 2. Leave distance: Leave enough space to accelerate, preferably in a lane with fewer cars, and avoid getting too close to the vehicle in front. 3. Steering wheel: Make slight adjustments to the steering wheel, about the width of one finger to the left or right. Adjust the direction in advance if you feel the car is getting closer to the white line. 4. Reference points: Use objects like trees or the double yellow lines on the road about 150 meters ahead. Align your eyes, the highest point of the steering wheel, and the reference point to form a straight line.
6
5
Share

Where is the Focus fog light fuse located?

Focus fog light fuse is located in the fuse box under the cover panel on the left side of the steering wheel. The purpose of fog lights is to make the vehicle visible to others in foggy or rainy conditions where visibility is significantly affected by weather. Therefore, fog light sources need to have strong penetration capability. Most vehicles use halogen fog lights, while more advanced models may feature LED fog lights. Below is a classification of automotive lights: 1. Headlights, combined headlights are located at the front of the vehicle, primarily serving illumination and signaling purposes. The light emitted by headlights illuminates the road ahead, enabling safe driving at night. 2. Combined taillights, located at the rear of the vehicle, mainly serve illumination and signaling functions. 3. Turn signals, used to indicate left or right turns to other road users. Regulations require them to be amber in color. 4. License plate lights, primarily used to illuminate the license plate, allowing following vehicles to identify the license plate in the dark.
13
1
Share

What does the exclamation mark next to the P indicate as a fault?

On the car's dashboard, the P with an exclamation mark indicates that the parking brake is engaged, which could mean the handbrake is not released or not fully released. Handbrake Indicator Light: The P stands for the handbrake indicator light. The function of the handbrake is to provide resistance to the car when parked, preventing it from rolling. The parking brake is either the handbrake or the parking gear in an automatic transmission, which locks the drive shaft or rear wheels. Other indicator lights on the car's dashboard include: A triangle with an exclamation mark inside is a general fault indicator. When this light appears, it means certain components of the car are experiencing issues, such as overheating of the dry dual-clutch transmission clutch, parking sensor failure, engine oil pressure sensor failure, or external light failure.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.