How to reset the tire pressure of Vision X6?
2 Answers
First, use the car computer to bring up the tire pressure monitoring system, press the reset button, then proceed to deflate the tire. Continue deflating until the horn sounds, indicating that one tire has been successfully reset. Repeat the same process for the other tires; the horn sounding signifies a successful reset. Below is relevant information about tire pressure: 1. Tire pressure is closely related to the performance of the car, such as comfort and load capacity, and it also affects the lifespan of the tire. Air pressure is the lifeblood of a tire; both too high and too low will shorten the tire's service life. 2. Low pressure increases the deformation of the tire body, making the sidewalls prone to cracks. It also causes flexing movements, leading to excessive heat, which accelerates rubber aging, fatigue of the cord layers, and breakage of the cords. Additionally, it increases the tire's contact area with the ground, accelerating wear on the tire shoulders. 3. High pressure causes excessive stretching and deformation of the tire cords, reducing the elasticity of the tire body. This increases the load on the car while driving, and impacts can lead to internal cracks and blowouts. Moreover, high pressure accelerates wear on the tire tread and reduces its resistance to punctures.
When driving the Vision X6, I often deal with the tire pressure alarm issue, and the reset operation is quite straightforward. After starting the car, don’t move yet. Simply press the menu button on the left side of the steering wheel, switch to the settings option, scroll down to find the tire pressure monitoring function. Click into it, select reset confirmation, and the system will beep to indicate the start of the learning process. Wait a moment until the indicator light goes off. After a successful reset, I recommend driving a short distance to test the calibration effect. Tire pressure monitoring is crucial. If the reset fails, it might be due to dirty sensors or uneven pressure—it’s best to check that all tires have a cold pressure of around 2.3 bar for balance. Remember to regularly verify with a pressure gauge to avoid tire wear affecting the reset accuracy.
