How to reset the tire pressure monitoring system on the Soueast DX7?
1 Answers
Soueast DX7 tire pressure monitoring reset method is as follows: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button. Release the button after hearing a "dong" sound. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the dashboard warning light will turn off, indicating the tire pressure reset is complete. Common tire pressure monitoring methods: Direct tire pressure monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure tire pressure. The pressure information is transmitted from inside the tire to a central receiver module via a wireless transmitter, which then displays the tire pressure data for each tire. The system automatically alerts when the tire pressure is too low or there is a leak. Indirect tire pressure monitoring: When the pressure in a tire decreases, the vehicle's weight causes that tire's rolling radius to become smaller, making it rotate faster than the other wheels. By comparing the rotational speed differences between tires, the system monitors tire pressure. Indirect tire pressure warning systems essentially rely on calculating the rolling radius of tires to monitor pressure. Introduction to Tire Pressure Monitoring System (TPMS): It combines the advantages of both systems mentioned above. Direct sensors are installed in two diagonally opposite tires, and a 4-wheel indirect system is also equipped. Compared to using only a direct system, this hybrid system can reduce costs and overcome the indirect system's inability to detect simultaneous low pressure in multiple tires. However, it still cannot provide real-time pressure data for all four tires like a direct system.
