How to reset the tire pressure monitoring system on the Baojun 730?
3 Answers
Baojun 730 tire pressure monitoring system reset method is: 1. Press the square icon button on the left side of the steering wheel; 2. Switch to the tire pressure monitoring screen; 3. Hold down the triangle icon button to clear and reset. Taking the 2019 Baojun 730 as an example, its body dimensions are: length 4780mm, width 1780mm, height 1740mm, wheelbase 2750mm, and fuel tank capacity 52l. The 2019 Baojun 730 is equipped with a 1.5t turbocharged engine, with a maximum horsepower of 147ps, maximum power of 108kw, maximum torque of 250nm, and is paired with a 6-speed manual transmission.
As a long-time owner of the Baojun 730, I find the tire pressure monitoring system reset method quite simple. First, park the car on level ground for safety, then check that all four tires are inflated to the recommended pressure, usually between 240-250 kPa (refer to the manual or the label on the door frame). Next, turn the key to the ON position without starting the engine, locate the small button with a tire symbol on the left side of the steering wheel or the center console area, press and hold it for about five seconds until the TPMS light on the dashboard blinks a few times and then goes off—this completes the reset. Afterward, drive slowly for a few minutes to allow the system to recalibrate the readings. I perform this procedure every time I change tires, which not only saves me a trip to the repair shop but also ensures driving safety. Making it a habit to regularly check tire pressure can also help avoid false alarm issues.
I've been driving my Baojun 730 for several years, and resetting the tire pressure monitoring system is part of my routine. The method isn't complicated: first, park the car and check if all tire pressures meet the standard values listed on the door pillar sticker. Then, insert the key and turn it to the second position (just enough for the dashboard lights to come on) without starting the engine. Next, locate the tire pressure reset button near the steering wheel—it's the small button marked with a tire symbol. Press and hold it for about three to four seconds until you see the indicator light come on, flash, and then turn off, indicating a successful reset. After resetting, remember to drive for a while to let the system automatically learn the new data, usually about five minutes is enough. These simple steps can extend the sensor's lifespan, making it both worry-free and practical.
