How to reset the tire pressure monitoring system on BYD Tang?
4 Answers
The reset method for BYD Tang's tire pressure monitoring system is: 1. Adjust the underinflated tire pressure to the standard value; 2. Drive at a constant speed of 40 km/h for approximately 10 minutes, allowing the tire pressure monitoring system to recalibrate; 3. The tire pressure warning light will automatically turn off upon successful recalibration. The BYD Tang is a 5-door, 7-seater midsize SUV with body dimensions of 4870mm in length, 1940mm in width, and 1720mm in height, with a wheelbase of 2820mm. It is equipped with a 2.0T turbocharged engine delivering a maximum power of 141 kW at 5500 rpm, paired with a 6-speed automatic transmission.
When I first drove the BYD Tang, I also encountered the tire pressure warning light coming on. It took me quite a while to figure out how to reset it. First, turn the key to the ignition-on position without starting the engine, and the central control screen will automatically light up. On the screen, tap 'Settings,' enter the 'Vehicle Settings' menu, and find an option called 'Tire Pressure Monitoring Reset.' Simply tap 'Confirm,' and you're done. After resetting, remember to drive for about ten minutes or roughly 5 kilometers—the system will automatically recalibrate the tire pressure data. The whole process is quite smooth, but don’t forget to check all tire pressures before resetting. Make sure they’re adjusted to the standard value of around 2.5 Bar. Once, I reset it with high tire pressure, and the light came back on, so be extra careful. Now, even when driving other cars, I still think BYD’s design is quite user-friendly—when false alarms happen frequently, a reset solves the issue, saving the hassle of repairs.
I've serviced many BYD models, and resetting the tire pressure system is quite straightforward. In the Tang, sit inside and press the start button without stepping on the brake to power it on. Navigate to the main menu on the center screen, tap settings, scroll down to the vehicle settings section, and select the tire pressure monitoring reset option to confirm. After the reset is complete, take a drive to let the system recheck the tire pressures. The key to DIY is being quick and hassle-free. Before resetting, use a tire pressure gauge to check if all four tires are within the recommended range—don’t reset if they’re low to avoid faults. Common reasons like false alarms or after changing tires usually mean the light goes off post-reset, and you can drive safely again.
Tire pressure monitoring system reset directly affects driving safety. For the BYD Tang, the process is simple: With the vehicle powered on, open the central control screen settings, select tire pressure reset, and confirm the operation. Before resetting, always manually check that the tire pressure is normal. After resetting, drive at low speed for calibration. The system automatically updates data to prevent false warnings. If the light remains on, professional inspection is required to prevent accidents.
