How to reset the tire pressure monitoring system on a Honda CR-V?

Can You Start the Engine If Water Enters the Exhaust Pipe?

Water entering the exhaust pipe does not affect the normal operation of the engine, and you can start the engine. Here is some information about the car exhaust pipe: 1. Definition of the exhaust pipe: The car exhaust corrugated pipe, also known as the car exhaust flexible hose, is installed in the exhaust pipe between the engine exhaust manifold and the muffler, providing a flexible connection for the entire exhaust system. This helps reduce vibration and noise, facilitates installation, and extends the life of the exhaust muffler system. 2. Function of the exhaust pipe: For the car body, the exhaust pipe plays a role in reducing vibration and noise and extending the life of the exhaust muffler system. The main material of the exhaust pipe is stainless steel. For most cars, since the exhaust gas leaving the engine is under high pressure, the noise it produces can be overwhelming. The primary role of the exhaust pipe in reducing noise is achieved through the installation of a muffler inside, which significantly lowers the noise level. The main working principle involves diverting the airflow through multiple channels, where the friction and collision between these channels gradually reduce the airflow speed. This process repeats, ultimately allowing the exhaust gas to flow out through the car's exhaust pipe, thereby reducing noise and achieving the daily noise reduction effect for cars.

20

2

Share

What is the simplest method to adjust toe-in?

Straighten the steering wheel and use a tape measure to measure the toe-in of the front wheels. The optimal position is where the car tires are perpendicular to the ground at the front. Measure the spacing for both left and right wheels based on this position. Compare the two measurements; the difference should generally be maintained between 1~2mm. If the difference exceeds this range, adjust it to fall within this value. During adjustment, turn the nuts on both tie rods as needed until the appropriate value is achieved.

20

0

Share

Has the Production Halt Date for Gasoline Vehicles Been Determined?

Domestically, no exact timeline has been announced for the discontinuation of fuel vehicle sales. The specific timing is still under study, as phasing out fuel vehicles is a significant matter that cannot be implemented hastily. A buffer period is necessary for domestic automakers to transition and allow time for related industries to adapt and conduct R&D. Relevant information is as follows: 1. Learning from Western Countries' Ban Timelines Due to the urgency of environmental protection and low-carbon initiatives, many countries have announced timelines to ban fuel vehicles. Norway has the shortest timeline, set to implement a ban on traditional fuel vehicles by 2025. The Netherlands initially targeted 2025 but later adjusted it to 2030. California, with its independent legislative authority in the U.S., set the ban for 2030, aligning with automotive powerhouses like Germany and populous nations like India. France and the UK have postponed their bans by a decade, targeting 2040 for the prohibition of traditional fuel vehicles, including hybrid vehicles in the UK's case. 2. Some Manufacturers to Begin Banning Fuel Vehicles by 2025 Even though the national timeline remains unannounced, certain domestic manufacturers have already started formulating related development strategies, including Changan, BAIC, and Haima.

4

2

Share

Can a car registered in 2014 still be exempt from inspection in 2021?

A car registered in 2014 cannot be exempt from inspection in 2021 and requires timely annual inspection processing. Below are the specific details about vehicle inspection: 1. Inspection Definition: Vehicle inspection refers to a mandatory test for all vehicles that have obtained official license plates and registration certificates, equivalent to an annual physical examination conducted according to the 'Technical Conditions for Motor Vehicle Operation Safety.' 2. Exemption Policy: Non-commercial small private passenger vehicles with 7 seats or fewer (including 7 seats) are exempt from on-site inspection for the first 6 years. However, owners must still pass an exhaust emission test within the specified period (usually every 2 years) and apply for an inspection compliance mark at the vehicle management office, vehicle registration service station, or traffic police substation, which must be displayed on the upper right corner of the front windshield. 3. Scope of Exemption Policy: The 6-year exemption policy for non-commercial passenger vehicles has been in trial since September 1, 2014. Vehicles registered after September 1, 2012, are eligible for two exemptions; those registered between September 1, 2010, and August 31, 2012, qualify for one exemption; vehicles registered before August 31, 2010, must follow the original inspection regulations for annual review.

16

0

Share

Where to Apply Lubricant for Brake Pedal Noise?

The most common cause of noise in the brake pedal is insufficient lubrication in the return spring of the brake pedal. You can apply a small amount of lubricant to the return spring. Below are some precautions for using the brakes: 1. Avoid emergency braking at high speeds: While driving at low speeds, you can perform emergency braking by fully depressing the brake pedal in case of sudden events ahead. However, this should not be done at high speeds to prevent vehicle skidding or rollover. 2. Gradual braking: During normal driving conditions, apply gradual braking. While depressing the clutch pedal, release the accelerator pedal, shift to a lower gear, and once the speed decreases, release the clutch pedal and depress the brake pedal until the vehicle comes to a complete stop. 3. Intermittent braking: On long downhill slopes in mountainous areas or in situations where continuous braking may generate excessive heat, intermittent braking—alternately depressing and releasing the brake pedal—can effectively prevent the braking system from overheating.

1

3

Share

How to Deal with Speeding 20% but Less Than 50% in Section Speed Measurement?

Speeding 20% but less than 50% in section speed measurement will not result in a fine, but penalty points will be deducted. Driving medium-sized or larger passenger or cargo vehicles, or school buses on highways or urban expressways at speeds exceeding the prescribed limit by 20% or more will result in 12 penalty points being recorded.

3

1

Share

How to reset the tire pressure monitoring system on a Honda CR-V?

Can You Start the Engine If Water Enters the Exhaust Pipe?

What is the simplest method to adjust toe-in?

Has the Production Halt Date for Gasoline Vehicles Been Determined?

Can a car registered in 2014 still be exempt from inspection in 2021?

Where to Apply Lubricant for Brake Pedal Noise?

How to Deal with Speeding 20% but Less Than 50% in Section Speed Measurement?

How to Connect Bluetooth in a Base Model Santana?

How to Install a New License Plate by Yourself?

What Are the Types of Sports Cars?

What to do if the ETC is stuck in the wrong position and needs to be repositioned?